Shear Deformation Mode of Reinforced Concrete Beam
Publication: Journal of Structural Engineering
Volume 113, Issue 4
Abstract
The two‐dimensional strain distribution of a member can be decomposed into a series of orthogonal strain‐mode tensors representing simple geometrical deformation modes. Expansion coefficients of the series are obtained by integrating the product of the strain tensor and the mode tensor over the member. Deflection of the member can also be decomposed into the sum of the contributions of the deformation modes. The method was applied to the test results of a reinforced concrete beam with a web opening. For this beam, the two‐dimensional strain distribution was measured by a contact gage network. The beam failed in shear. The observed deformation pattern agreed well with that given by the prevailing plastic theory after the shear strength was approximately reached.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, B. G., Priestley, N. J. N., and Paulay, T., “Seismic Shear Strength of Circular Bridge Piers,” Research Report No. 85‐5, University of Canterbury, Christchurch, New Zealand, 1985, 408 pp.
2.
Collins, M. P., and Mitchell, D., “Shear and Torsion Design of Prestressed and Non‐Prestressed Concrete Beams,” Journal of the Prestressed Concrete Institute, Vol. 25, No. 5, Sept.–Oct., 1980, pp. 32–100.
3.
“CEB‐FIP Model Code for Concrete Structures,” 3rd ed., Comite Enro‐International du Beton/Federation Internationale de la Precontrainte, Paris, France, 1978.
4.
Ichinose, T., Takahashi, L., and Takiguchi, K., “Deformation Modes of R/C Beams with and without a Web Opening,” Transactions of the Japan Concrete Institute, Vol. 5, 1983, pp. 379–386.
5.
Ichinose, T., and Takiguchi, K., “Mode Decomposition of Two‐Dimensional Stress and Strain Distribution,” Proceedings of Colloquium on Finite Analysis of Reinforced Concrete Structures, Japan Concrete Institute, 1984, pp. 131–138, (in Japanese).
6.
Marti, P., Pralong, J., and Thurlimann, B., “Schubversuche an Stahlbetonplatten (Shear Tests on Reinforced Concrete Slabs),” Report No. 7305‐2 Institute of Structural Engineering, Swiss Federal Institute of Technology (ETH), Zurich, Switzerland, 1977, p. 111.
7.
Marti, P., “Basic Tools of Reinforced Concrete Beam Design,” Journal of the American Concrete Institute, Vol. 82, No. 1, Jan.–Feb., 1985, pp. 46–56.
8.
Nielsen, M. P., Limit Atialysis and Concrete Plasticity, Prentice Hall, N.J., 1984, 420 pp.
9.
Turlimann, B., “Shear Strength of Reinforced and Prestressed Concrete Beams—CEB Approach,” Proceedings of the Symposium on Concrete Design: U.S. and European Practices, Special Publication, SP‐59, ACI, Detroit, Mich., 1979, pp. 93–115.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Apr 1, 1987
Published in print: Apr 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.