Reinforcement of Brick Walls Spanning Vertically
Publication: Journal of Structural Engineering
Volume 113, Issue 2
Abstract
A vertical shear connector suitable for manufacture by automated sheet metal processes from steel coil is developed in an experimental program involving 90 small area bearing tests, 18 shear tests, and 6 tension tests. A comparison of three full‐scale wall panel tests (standard cavity wall, cavity wall with an unbonded steel mullion, and cavity wall with a vertical shear connector) demonstrate that the connector significantly increases both the post‐ and pre‐cracking strength and stiffness of a vertically spanning brick masonry cavity wall under out‐of‐plane loads.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Brickwork Code,” AS1640, Standards Association of Australia, Sydney, Australia, 1974.
2.
Lawrence, S. J., “Behaviour of a Brick Cavity Wall Under Lateral Load, Including the Effects of an Intermediate Steel Mullion,” Technical Record 441, Experimental Building Station, Department of Construction, Australia, Feb., 1978.
3.
“Loading Code, Part 1—Dead and Live Loads, Part 2—Wind Forces,” AS1170, Standards Association of Australia, Sydney, Australia, 1983.
4.
“Methods of Testing Burnt Clay and Shale Building Bricks,” AS1226, Standards Association of Australia, Sydney, Australia, 1980.
5.
“Mortar for Masonry Construction,” AS A123, Standards Association of Australia, Sydney, Australia, 1963.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Feb 1, 1987
Published in print: Feb 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.