New Constitutive Law for Equal Leg Fillet Welds
Publication: Journal of Structural Engineering
Volume 111, Issue 8
Abstract
A new constitutive law for the load resistance versus displacement of equal leg fillet welds is derived from consideration of the mean stresses induced in a fillet weld due to general in‐plane loading of the weld element. Plasticity theory with an isotropic hardening rule is used to derive expressions for the ultimate strength and maximum displacement of the fillet weld. A set of curves representative of the constitutive law is presented. The constitutive law contains the fundamental parameters of the problem, illustrates the anisotropic nature of the response of fillet welds and is presented in invariant, nondimensional form.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alexander, J. M, Strength of Materials, Ellis Horwood Ltd., West Sussex England, 1981.
2.
Australian Standard, AS1250‐1975, SAA Steel Structures Code (Metric Units), Standards Association of Australia, Australia.
3.
Billington, E. W., and Tate, A., The Physics of Deformation and Flow, McGraw‐Hill, Inc., New York, N.Y., 1981.
4.
Butler, L. J., Pal, S., and Kulak, G. L., “Eccentrically Loaded Welded Connections,” Journal of the Structural Division, ASCE, Vol. 98, No. ST5, Proc. Paper 8874, May, 1972, pp. 989–1005.
5.
Clark, P. J., “Basis of Design for Fillet‐Welded Joints Under Static Loading,” Proceedings, Conference on Welding Product Design, Vol. 2, Welding Institute, Ablington, United Kingdom, 1972, pp. 85–96.
6.
Fisher, J. W., et al., “Load and Resistance Factor Design Criteria for Connectors,” Journal of the Structural Division, ASCE, Vol. 104, No. ST9, Sept., 1978, pp. 1427–1441.
7.
Handbook of Steel Construction, CISC, 3rd Ed., Canadian Institute of Steel Construction, Ontario, Canada, 1980.
8.
Kamtekar, A. G., “A New Analysis of the Strength of Some Simple Fillet Welded Connections,” Journal of Constructional Steel Research, Vol. 2, No. 2, June, 1982, pp. 33–45.
9.
Manual of Steel Construction, AISC, 8th Ed., American Institute of Steel Construction, Chicago, 1980.
10.
Mendelson, A., Plasticity: Theory and Application, MacMillan Co., New York, N.Y., 1968.
11.
Swannell, P., “Rational Design of Weld Groups,” Journal of the Structural Division, ASCE, Vol. 107, No. ST5, May, 1981, pp. 789–802.
12.
“Welding in the World,” Journal of the International Institute of Welding, Doc. IIS/IIW‐690‐81, P. D. Boyd, ed., Vol. 19, No. 11/12, 1981, pp. 189–196.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Aug 1, 1985
Published in print: Aug 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.