Sensitivity Analysis for Structural Errors
Publication: Journal of Structural Engineering
Volume 111, Issue 8
Abstract
Uncertainties in structures result from natural hazards, man‐made hazards, variations within common practice, and accepted departures from common practice. However, the major source of structural uncertainty and failures is departure from accepted practice, i.e., human error. The purpose of an error control strategy is to lower the frequency of errors which have large consequences. Sensitivity functions which relate structural errors to structural safety are bases for a control strategy. Sensitivity analysis is performed for several practical cases to demonstrate calculation of sensitivity functions and its importance in establishing an error control strategy.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, D. E., “ACI Error Survey—Canadian Data,” Building Research Note No. 123, National Research Council of Canada, Ottawa, Canada, July, 1977.
2.
Blockley, D. I., Pilsworth, B. W., and Baldwin, J. F., “Structural Safety as Inferred from a Fuzzy Relational Knowledge Base,” Applications of Statistics and Probability in Soil and Structural Engineering, Conference Proceedings, Florence, Italy, June, 1983, pp. 651–668.
3.
Brown, C. B., “A Fuzzy Safety Measure,” Journal of Engineering Mechanics, ASCE, Vol. 105, No. EM5, Oct., 1979, pp. 855–872.
4.
Ditlevsen, O., “Fundamental Postulate in Structural Safety,” Journal of Engineering Mechanics, ASCE, Vol. 109, No. EM4, Aug., 1983, pp. 1096–1102.
5.
Ditlevsen, O., and Hasofer, A. M., “Design Decision Model Considering Mistake‐Proneness,” Report No. 273, The Technical University of Denmark, Sept., 1983.
6.
Ellingwood, B., et al., “Development of a Probability Based Load Criterion for American National Standard A58,” NBS Publication 577, Washington, D.C., June, 1980.
7.
Fisher, J. W., et al., “Load and Resistance Factor Design Criteria for Connectors,” Journal of the Structural Division, ASCE, Vol. 104, No. ST9, Sept., 1978, pp. 1427–1441.
8.
Fox, S. R., “Predicting the Proneness of Buidings to Gross Errors in Design and Construction,” thesis presented to the University of Waterloo, at Waterloo, Ontario, in 1982, in partial fulfillment of the requirements for the degree of Master of Civil Engineering.
9.
Fraczek, J., “ACI Survey of Concrete Structure Errors,” Concrete International, ACI, 2, Dec., 1979.
10.
Leyendecker, E. V., and Burnett, E. F. P., “The Incidence of Abnormal Loading in Residential Building,” NBS Science Series 89, National Bureau of Standards, Dec., 1976.
11.
Lind, N. C., “Models of Human Error in Structural Reliability,” Structural Safety, Vol. 1, No. 3, Apr., 1983, pp. 167–175.
12.
Matousek, M., “Outcomings of a Survey on 800 Construction Failures,” IABSE Colloquium on Inspection and Quality Control, July, 5–7, 1977, Cambridge, England.
13.
Melchers, R. E., and Harrington, M. V., “Structural Reliability as Affected by Human Error,” Applications of Statistics and Probability in Soil and Structural Engineering, Conference Proceedings, Florence, Italy, June, 1983, pp. 683–694.
14.
Nowak, A. S., “Effect of Human Error on Structural Safety,” Journal of the American Concrete Institute, Vol. 76, No. 9, Sept., 1979, pp. 959–972.
15.
Nowak, A. S., and Boutros, M. K., “Probabilistic Analysis of Timber Decks,” Journal of Structural Engineering, ASCE, Vol. 110, No. 12, Dec., 1984, pp. 2939–2954.
16.
Nowak, A. S., and Lind, N. C., “Practical Bridge Code Calibration,” Journal of the Structural Division, ASCE, Vol. 105, No. ST12, Dec., 1979, pp. 2497–2510.
17.
Rackwitz, R., “Note on the Treatment of Errors in Structural Reliability,” Technische Universitat Muchen, Laboratorium fur den Konstrucktiven Ingenierbau, Heft 21, 1977, pp. 23–35.
18.
Rackwitz, R., and Fiessler, B., “Structural Reliability Under Combined Random Load Sequences,” Computers and Structures, No. 9, 1978, pp. 484–494.
19.
Schneider, J., ed., “Quality Assurance Within the Building Process,” Proceedings, IABSE Workshop, Vol. 47, Rigi, Switzerland, June, 1983.
20.
“Standard Specifications for Highway Bridges,” American Association of State Highway and Transportation Officials, Washington, D.C., 1977.
21.
Thoft‐Christensen, P., and Baker, M., “Structural Reliability Theory and Its Applications,” Springer‐Verlag, 1982.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Aug 1, 1985
Published in print: Aug 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.