Cyclic Out‐of‐Plane Buckling of Double‐Angle Bracing
Publication: Journal of Structural Engineering
Volume 111, Issue 5
Abstract
The behavior of double‐angle bracing members subjected to out‐of plane buckling due to severe cyclic load reversals is investigated. Nine full‐size test specimens were subjected to severe inelastic axial deformations. Test specimens were subjected to severe inelastic axial deformations. Test specimens were made of back‐to‐back A36 steel angle sections connected to the end gusset plates by fillet welds or high‐strength bolts. Five of the test specimens were designed according to current design procedures and code requirements. These specimens experienced fracture in gusset plates and stitches during early cycles of loading. Based on the observations and analysis of the behavior of these specimens, new design procedures are proposed for improved ductility and energy dissipation capacity of double‐angle bracing members which buckle out of plane of gusset plates. Tests of four specimens, designed using proposed procedures, showed significant improvement in their performances.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Astaneh‐Asl, A., and Goel, S. C., “Cyclic In‐Plane Buckling of Double Angle Bracing,” Journal of Structural Engineering, ASCE, Vol. 110, No. 9, Sept., 1984, pp. 2036–2055.
2.
Astaneh‐Asl, A., Goel, S. C., and Hanson, R. D., “Cyclic Behavior of Double Angle Bracing Members with End Gusset Plates,” Report No. UMEE 82R7, Department of Civil Engineering, University of Michigan, Ann Arbor, Mich., Aug., 1982.
3.
Black, R. G., Wenger, W. A., and Popov, E. P., “Inelastic Buckling of Steel Struts Under Cyclic Load Reversals,” Report No. UBC/EERC‐80/40, University of California, Berkeley, Calif., Oct., 1980.
4.
Gugerli, H., and Goel, S. C., “Inelastic Cyclic Behavior of Steel Bracing Members,” Report No. UMEE 82R1, Department of Civil Engineering, University of Michigan, Ann Arbor, Mich., Jan., 1982.
5.
Hawasumi, H., ed., General Report on the Niigata Earthquake of 1964, Tokyo Electrical Engineering College Press, 1968, pp. 244, 254, and 347.
6.
Jain, A. K., and Goel, S. C., “Hysteresis Models for Steel Members Subjected to Cyclic Buckling or Cyclic End Moments and Buckling,” Report No. UMEE 78R6, Department of Civil Engineering, University of Michigan, Ann Arbor, Mich., Dec., 1978.
7.
Jain, A. K., Goel, S. C., and Hanson, R. D., “Hysteresis Behavior of Bracing Members and Seismic Response of Braced Frames with Different Proportions,” Report No. UMEE 78R3, Department of Civil Engineering, University of Michigan, Ann Arbor, Mich., July, 1978.
8.
Manual of Steel Construction, 8th Ed., American Institute of Steel Construction, Chicago, Ill., 1980.
9.
Popov, E. P., “Inelastic Behavior of Steel Braces Under Cyclic Loading,” Proceedings, Second U.S. National Conference on Earthquake Engineering, Stanford University, Stanford, Calif., Aug. 22–24, 1979, pp. 923–932.
10.
Popov, E. P., Takanashi, K., and Roeder, C. W., “Structural Steel Bracing Systems: Behavior Under Cyclic Loading,” Report No. UBC/EERC‐76/17, University of California, Berkeley, Calif., 1976.
11.
Roeder, C. W., and Popov, E. P., “Eccentrically Braced Frames for Earthquakes,” Journal of the Structural Division, ASCE, Vol. 104, No. ST3, Paper 13619, Mar., 1978, pp. 391–412.
12.
Shibata, M., Nakamura, T., Yoshida, N., Morino, S., Nonaka, T., and Wakabayashi, M., “Elasto‐Plastic Behavior of Steel Braces Under Repeated Axial Loading,” Proceedings, V World Conference on Earthquake Engineering, Rome, Italy, 1973, pp. 845–848.
13.
Specification for the Design, Fabrication and Erection of Structural Steel for Buildings, American Institute of Steel Construction, 1978.
14.
Uniform Building Code, International Conference of Building Officials, Whittier, Calif., 1976, pp. 133.
15.
Yamanuchi, H., “Damage of Steel Frame Building,” Quarterly Column, Nippon Steel Corporation, No. 71, Tokyo, Japan, Jan., 1979, pp. 26–27 (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: May 1, 1985
Published in print: May 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.