Local Buckling of Hollow Structural Sections
Publication: Journal of Structural Engineering
Volume 111, Issue 5
Abstract
An analytical technique for predicting the local buckling behavior of thin‐walled sections was used to predict elastic and inelastic local buckling capacities of axially loaded hollow structural sections. The technique, similar to a finite strip method, is based on the principle of virtual work and uses a Rayleigh‐Ritz solution procedure. The effects of manufacturing process and interaction between adjacent plates are included in the formulation. The method is verified by comparing predicted loads with available test results and known elastic solutions of plate buckling. Various parameters considered to be significant in affecting local buckling capacities of hollow structural sections are evaluated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Birkemoe, P. C., “Development of Column Curves for HSS,” International Symposium of Hollow Structural Sections, International Committee for Research and Development of Tubular Construction (CIDECT), Toronto, Ontario, May, 1977.
2.
Bjorhovde, R., “Strength and Behaviour of Cold‐Formed HSS Columns,” Structural Engineering Report No. 65, Department of Civil Engineering, University of Alberta, Dec., 1977.
3.
Bjorhovde, R., and Birkemoe, P. C., “Limit States Design of HSS Columns,” Canadian Journal of Civil Engineering, Vol. 6, No. 2, June, 1979, pp. 276–291.
4.
Davison, T. A., and Birkemoe, P. C., “Column Behaviour of Cold‐Formed Hollow Structural Steel Shapes,” Canadian Journal of Civil Engineering, Vol. 10, No. 1, Mar., 1983.
5.
Dawe, J. L., and Grondin, G., “Inelastic Buckling of Steel Plates,” Journal of Structural Engineering, ASCE, Vol. III, No. 1, Jan., 1985.
6.
Dawe, J. L., and Kulak, G. L., “Plate Instability of W Shapes,” Journal of Structural Engineering, ASCE, Vol. 110, No. 6, June, 1984, pp. 1278–1291.
7.
Dawe, J. L., and Kulak, G. L., “Local Buckling of W Shape Columns and Beams,” Journal of Structural Engineering, ASCE, Vol. 110, No. 6, June, 1984, pp. 1292–1304.
8.
Elgabry, A. A., “Local Buckling of Hollow Structural Sections,” thesis presented to the University of New Brunswick, at Fredericton, New Brunswick, in 1984, in partial fulfillment of the requirements for the degree of Master of Science in Engineering.
9.
Grondin, G. Y., “Buckling of Steel Plates in the Elastic, Yielding, and Strain‐Hardening Ranges,” thesis presented to the University of New Brunswick, at Fredericton, New Brunswick, in 1983, in partial fulfillment of the requirements for the degree of Master of Science in Engineering.
10.
Kroll, W. D., Fisher, G. P., and Heimerl, G. J., “Charts for Calculation of the Critical Stress for Local Instability of Columns with I‐, Z‐, Channel, and Rectangular‐Tube Sections,” Wartime Report No. L‐429, National Advisory Committee for Aeronautics, Nov., 1943.
11.
Lundquist, E. E., Stowell, E. Z., and Schuette, E. H., “Principles of Moment Distribution Applied to Stability of Structures Composed of Bars or Plates,” Technical Notes No. 809, National Advisory Committee for Aeronautics, 1945.
12.
Salvarinas, J. J., Barker, J. D., and Birkemoe, P. C., “An Experimental Investigation of the Column Behaviour of Cold‐Formed Stress‐Relieved Hollow Structural Steel Sections,” Publication 78‐02, Department of Civil Engineering, University of Toronto, Canada, May, 1978.
13.
Sindrey, D. A., “The Application of Concrete‐Filled Hollow Structural Sections,” Proceedings of the Canadian Symposium on Hollow Structural Sections, Steel Company of Canada, Ltd., Apr., 1983.
14.
“Steel Structures for Buildings—Limit States Design,” CSA S16.1‐M78, Canadian Standards Association, Rexdale, Ontario, Canada, 1978.
15.
Stowell, E. Z., and Lundquist, E. E., “Local Instability of Columns with I‐, Z‐, Channel, and Rectangular‐Tube Sections,” Technical Notes No. 743, National Advisory Committee for Aeronautics, 1939.
16.
Timoshenko, S. P., and Gere, J. M., Theory of Elastic Stability, 2nd Ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 1961.
17.
Tomii, M., et al., “Experimental Studies on Concrete Filled Steel Tubular Stub Columns Under Concentric Loading,” Proceedings of the International Colloquium on Stability of Structures Under Static and Dynamic Loads, ASCE, Washington, D.C., May, 1977.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: May 1, 1985
Published in print: May 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.