Cracking in Reinforced Concrete Analysis
Publication: Journal of Structural Engineering
Volume 110, Issue 8
Abstract
In most conventional methods of reinforced concrete analysis, cracks are formed in the principal stress direction and are not allowed to change direction with the change in state. This practice leads to crack directions inconsistent with the limit state. There is experimental evidence that the crack directions may change in the course of loading. A simple model of forming cracks in reinforced concrete is proposed. It is assumed that the cracks are formed in the direction of the major principal tensile strain and that the direction can change with the change in strains. The proposed model leads to crack directions which are consistent with the limit state. A numerical algorithm, based on the proposed model, which is suitable for step‐by‐step finite element analysis is also presented. The algorithm is applied to limited available experiments.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Society of Civil Engineers, “Finite Element Analysis of Reinforced Concrete Structures,” Report, 1982.
2.
Baumann, T., “Zur Frage der Netzbewehrung von Flachentragwerken,” Der Bauingenieur, Vol. 47, No. 10, 1972, pp. 367–377.
3.
Brondum‐Nielsen, T., “Optimum Design of Reinforced Concrete Shells and Slabs,” Report No. R44, Structural Research Laboratory, University of Denmark, Copenhagen, Denmark, 1974.
4.
Conley, C. H., White, R. N., and Gergely, P., “Strength and Stiffness of Reinforced Concrete Panels Subjected to Membrane Shear, Two Way and Four‐Way Reinforcing,” Cornell University; Prepared for U.S. Nuclear Regulatory Commission, NUREG/CR‐2049, Apr., 1981.
5.
Duchon, N. B., “Analysis of Reinforced Concrete Membrane Subjected to Tension and Shear,” American Concrete Institute Journal, Sept., 1972, pp. 578–583.
6.
Gupta, Ajaya K., “Membrane Reinforcement in Shells,” Journal of the Structural Division, ASCE, Vol. 107, No. ST1, Proc. Paper 15957, Jan., 1981, pp. 41–56.
7.
Gupta, Ajaya K., and Habibollah, Akbar, “Reinforced Concrete Shells— Analysis vs. Design,” Proceedings, Engineering Mechanics Division Specialty Conference, ASCE, Purdue University, May, 1983, pp. 702–705.
8.
Nielsen, M. P., “On the Strength of Reinforced Concrete Discs,” ACTA Polytechnica Scandinavica, Civil Engineering and Building Construction Series, No. 70, Copenhagen, Denmark, 1971.
9.
Oesterle, R. G., and Russell, H. G., “Shear Transfer in Large Scale Reinforced Concrete Containment Elements,” Report No. 1, Portland Cement Association, Prepared for U.S. Nuclear Regulatory Commission, NUREG/CR‐1374, Apr., 1980.
10.
Perdikaris, P. C., White, R. N., and Gergely, P., “Strength and Stiffness of Tensioned Reinforced Concrete Panels Subjected to Membrane Shear, Two‐Way Reinforcing,” Cornell University; Prepared for U.S. Nuclear Regulatory Commission, NUREG/CR‐1602, July, 1980.
11.
Peter, J., “Zur Bewehrung von Scheiben und Schalen fur Hauptspannungen Schiefwinklig zur Bewehrungsrichtung,” Dr. Ing.—Dissertation, T. H. Stuttgart, 1964.
12.
Vecchio, F., and Collins, M. P., “The Response of Reinforced Concrete to Inplane Shear and Normal Stresses,” ISBNO‐7727‐7029‐8, Publication No. 82‐03, University of Toronto, Mar., 1982.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Aug 1, 1984
Published in print: Aug 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.