Simultaneous Flow over and under a Gate
Publication: Journal of Irrigation and Drainage Engineering
Volume 127, Issue 5
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ansar, M., Alexis, A., and Damisse, E. ( 2000). “Improved flow computation procedures at Kissimmee-River gated structures.” Proj. Rep., Hydro. and Hydr. Dept./EMA/6423, South Florida Water Management District, West Palm Beach, Fla.
2.
Cofré A., and Buchheister, R. ( 1956). “Escurrimiento bajo compuertas [Flow under sluice gates].” Civ. Engrg. thesis, Catholic University, Santiago, Chile (in Spanish).
3.
Montes, J. S. (1997). “Irrotational flow and real fluid effects under planar sluice gates.”J. Hydr. Engrg., ASCE, 123(3), 219–232.
4.
Bagarello, V., and Ferro, V. ( 1998). “Calibrating storage tanks for soil erosion measurement from plots.” Earth Surface Processes and Landforms, 23, 1151–1170.
5.
Barenblatt, G. I. ( 1993). “Scaling laws for fully developed turbulent shear flows. Part 1: Basic hypothesis and analysis.” J. Fluid Mech., 248, 513–520.
6.
Barenblatt, G. I., and Monin, A. S. ( 1979). “Similarity laws for turbulent stratified flows.” Arch Ration. Mech. Anal. 70, 307–317.
7.
Barenblatt, G. I., and Prostokishin, V. M. ( 1993). “Scaling laws for fully developed turbulent shear flows. Part 2: Processing of experimental data.” J. Fluid Mech., 248, 521–529.
8.
Butera, L., Ridolfi, L., and Sordo, S. ( 1993). “On the hypothesis of self-similarity for the velocity distribution in turbulent flows.” Excerpta, 8, 63–94.
9.
Di Stefano, C., and Ferro, V. (1998). “Calculating average filling rock diameter for gabion-mattress channel design.”J. Hydr. Engrg., ASCE, 124(9), 975–978.
10.
Ferro, V. ( 2000). “Design relationships for rock chute channels.” Trans. ASAE, 43(3), 585–590.
11.
Ferro, V. (2001). “Discussion of `Simple flow measurement in open channel,' by Z. Samani and H. Magallanez.”J. Irrig. and Drain. Engrg., ASCE, in press.
12.
Ferro, V., and Pecoraro, R. ( 2000). “Incomplete self-similarity and flow velocity in gravel bed channels.” Water Resour. Res., 36(9), 2761–2769.
13.
Hager, W. H. (1986). “Modified, trapezoidal Venturi channel.”J. Irrig. and Drain. Engrg., ASCE, 112(3), 225–241.
14.
Hager, W. H. (1988). “Venturi flume of minimum space requirements.”J. Irrig. and Drain. Engrg., ASCE, 114(2), 226–243.
15.
Kindsvater, C. E., and Carter, R. W. (1957). “Discharge characteristics of rectangular thin-plat weirs.”J. Hydr. Div., ASCE, 83(6), 1–35.
16.
Parshall, R. L. ( 1926). “The improved Venturi flume.” Trans. ASCE, ASCE, 89, 841–880.
17.
Ranga Raju, K. G., and Asawa, G. L. (1977). “Viscosity and surface tension effects on weir flow.”J. Hydr. Div., ASCE, 103(10), 1227–1231.
18.
Rouse, H. ( 1950). Engineering hydraulics, Wiley, New York.
19.
Samani, Z., Jorat, S., and Yousef, M. (1991). “Hydraulic characteristics of circular flume.”J. Irrig. and Drain. Engrg., ASCE, 117(4), 558–566.
20.
Samani, Z., and Magallanez, H. (2000). “Simple flume for flow measurement in open channel.”J. Irrig. and Drain. Engrg., ASCE, 126(2), 127–129.
21.
Skoogerboe, G. V., Bennett, R. S., and Walker, W. R. (1972). “Generalized discharge relations for cutthroat flumes.”J. Irrig. and Drain. Engrg., ASCE, 98(4), 569–583.
Information & Authors
Information
Published In
History
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.