Flow Characteristics of Chimney Weir under Submergence
Publication: Journal of Irrigation and Drainage Engineering
Volume 124, Issue 2
Abstract
A theoretical submerged flow equation for chimney weir is developed. Based on experiments conducted with five different chimney weirs, it is found that the theoretical submerged flow equation, along with a parabolic equation relating the coefficient of discharge and the ratio of upstream head to crest height, predicts the discharge accurately. The performance of the developed equation is compared with the previously developed submergence formulas for sharp-crested weirs, and it is seen that the developed equation performs better within the experimental range. Further, for simplicity, an empirical equation is also proposed, which is found to give reasonable prediction of submerged discharge.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Keshava Murthy, K., and Gopalakrishna Pillai, K.(1978a). “Design of constant accuracy linear proportional weirs.”J. Hydr. Div., ASCE, 104(4), 527–541.
2.
Keshava Murthy, K., and Gopalakrishna Pillai, K.(1978b). “Modified proportional v-notch weirs.”J. Hydr. Div., ASCE, 104(4), 775–791.
3.
Keshava Murthy, K., and Giridhar, D. P.(1989). “Inverted v-notch: A practical proportional weir.”J. Irrig. and Drain. Engrg., ASCE, 115(6), 1035–1050.
4.
Keshava Murthy, K., and Giridhar, D. P.(1990). “Improved inverted v-notch or chimney weir.”J. Irrig. and Drain. Engrg., ASCE, 116(3), 374–386.
5.
Keshava Murthy, K., and Giridhar, D. P.(1991). “Geometrically simple linear weirs using circular quadrants—bell mouth weirs.”J. Hydr. Res., 29(4), 497–509.
6.
Keshava Murthy, K., and Shesha Prakash, M. N.(1994). “Practical constant-accuracy linear weir.”J. Irrig. and Drain. Engrg., ASCE, 120(3), 550–562.
7.
Lakshmana Rao, N. S., and Bhukari, C. H. A.(1970). “Linear proportional weirs with trapezoidal bottoms.”J. Hydr. Res., 9(3), 413–427.
8.
Mavis, F. T.(1949). “How to calculate flow over submerged thin plate weirs.”Engrg. News Record, 143(1), 65–69.
9.
Ramamurthy, A. S., Subramanya, K., and Pani, B. S.(1977). “Quadrant plate weirs.”J. Hydr. Div., ASCE, 103(12), 1431–1441.
10.
Sreenivasulu, P., and Raghavendra, R.(1970). “Linear proportional weirs.”J. Hydr. Div., ASCE, 96(2), 379–389.
11.
Stevens, J. C.(1956). “Proportional weirs for sedimentation tanks.”J. Hydr. Div., ASCE, 82(3), 1–23.
12.
Swamee, P. K., Pathak, S. K., Agarwal, M., and Ansari, S.(1991). “Alternative linear weir design.”J. Irrig. and Drain. Engrg., ASCE, 117(3), 311–323.
13.
Troskolanski, A. T. (1960). Hydrometry: theory and practice of hydraulic measurements. Pergamon Press, Inc., New York, N.Y.
14.
Vennard, J. K., and Weston, R. F.(1943). “Submergence effect on sharp-crested weirs.”Engrg. News Record, 130(22), 814–816.
15.
Villemonte, J. R.(1947). “Submerged weir discharge studies.”Engrg. News Record, 139(26), 866–869.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.