Bottom Outlet for Sewers
Publication: Journal of Irrigation and Drainage Engineering
Volume 123, Issue 4
Abstract
The bottom opening is a standard structure in storm sewers, provided the approach flow is supercritical. Based on extended experimentation and by using the governing flow equations, the hydraulic characteristics of bottom openings were derived. These include the approach reach, the end depth ratio, the average discharge coefficient, the tailwater depth, and the hydraulic loss across the outlet. Further, velocity distributions in the outlet zone are discussed. The results of this study reveal that the approach Froude number has a significant effect on the flow mechanism. General expressions are derived for the lower and upper nappes of the flow across the bottom opening, and a hydraulic design procedure is described. A generalized streamwise coordinate is also introduced that allows description of supercritical sewer flow. It is demonstrated that the excess discharge to the treatment station under design discharge is within the requirements of European standards.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ATV. (1994). “Richtlinien für die hydraulische Dimensionierung und den Leistungsnachweis von Regenwasser-Entlastungsanlagen und Abwasserkanälen und -leitungen.”Arbeitsblatt (A111). Abwassertechnische Vereinigung, Hennef, Germany (in German).
2.
Biggiero, V. (1961). “Scaricatori a salto per reti di fogne.”Ingegneria Sanitaria, Milan, Italy, 4, 1–20 (in Italian).
3.
Biggiero, V. (1964). “Scaricatori di fogna con luce sul fondo in alvei cilindricio o a valle di salti.”Pubblicazione, 198, Naples, Italy (in Italian).
4.
Biggiero, V.(1969). “Scaricatori di piena per fognature.”Ingegneri, Naples, Italy, 10(57), 1–36.
5.
Chow, V. T. (1959). Open channel hydraulics. McGraw-Hill Inc., New York, N.Y.
6.
Clausnitzer, B., and Hager, W. H. (1997). “Outflow characteristics from circular pipe.”J. Hydr. Engrg., accepted.
7.
Hager, W. H. (1985). “Bodenöffnungen in Entlastungsanlagen von Kanalisationen.”Gas-Wasser-Abwasser, Zurich, Switzerland, 65(1), 15–23 (in German).
8.
Hager, W. H. (1992). “Vereinfachte Berechnung von Springüberfällen.”Gas-Wasser-Abwasser, 72(7), 469–475 (in German).
9.
Hager, W. H. (1994). Abwasserhydraulik. Springer-Verlag KG, Berlin, Germany (in German).
10.
Hager, W. H., and Hager, K. (1985). “Streamline curvature effects in distribution channels.”Proc., Inst. Mech. Engrs., 199(C3), 165–172.
11.
Laco, V. (1981). “Some results obtained in the study of the hydraulic parameters of two storeyed relief chamber with a throttled conduit of the combined sewer system.”Vodohospodarsky, Prague, Czech Republic, 29(4), 428–447 (in Czech).
12.
Taubmann, K.-C. (1972). “Regenüberläufe.”Gas-Wasser-Abwasser, 52(10), 297–308 (in German).
13.
Ueberl, J., and Hager, W. H. (1994). “Mobiler Venturikanal im Rechteckprofil.”Gas-Wasser-Abwasser, 74(9), 761–768 (in German).
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.