Evaluation of Time-Rated Infiltration Families for Noncracking Soils
This article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 123, Issue 4
Abstract
The time-rated infiltration families proposed by Merriam and Clemmens were further developed and evaluated using infiltration data for noncracking soils. Infiltration experiments were monitored, using a double-ring infiltrometer, at 10 field sites in New South Wales (NSW), Australia. Published infiltration data for soils in Botswana were also included to extend the range of soil types and field conditions in the study. A methodology was developed for identifying the infiltration family of soil at a given field. The time-rated infiltration family concept along with the methodology developed was evaluated under a range of field conditions. For 80% of field situations, the error introduced in infiltration characteristics due to the use of the family concept is <35% with an average value of the error about 20%. The infiltration characteristics of soil at a given site in this study exhibited a high variability although the measurements were made only a few meters apart. This observation reinforces potential benefits of using infiltration family concepts in the design and management of irrigation systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bautista, E., and Wallender, W. W.(1985). “Spatial variability of infiltration in furrows.”Trans. ASAE, 28, 1846–1851.
2.
Bonell, M., and Williams, J.(1986). “The two parameters of the Philip infiltration equation: their properties and spatial and temporal heterogeneity in a red earth of tropical semi-arid Queensland.”J. Hydro., Amsterdam, The Netherlands, 87, 9–31.
3.
Bouwer, H.(1963). “Theoretical effects of unequal water levels on the infiltration rate determined with buffered cylinder infiltrometers.”J. Hydro., Amsterdam, The Netherlands, 1, 29–34.
4.
Bouwer, H. (1986). “Intake rate: cylinder infiltrometer.”Methods of soil analysis. Part 1: physical and mineralogical methods, A. Klute, ed., ASA/SSSA, Madison, Wis. 825–844.
5.
Burgy, R. H., and Luthin, J. N.(1956). “A test of the single and double ring type infiltrometers.”Trans. Am. Geophys. Union, 37, 189–191.
6.
Clemmens, A. J.(1981). “Evaluation infiltration measurements for border irrigation.”Agric. Water Mgmt., 3, 251–267.
7.
Collis-George, N.(1980). “A pragmatic method to determine the parameters that characterize ponded infiltration.”Australian J. Soil Res., 18, 111–117.
8.
Fonteh, M. F., and Podmore, T.(1994). “Application of geostatistics to characterize spatial variability of infiltration in furrow irrigation.”Agric. Water Mgmt., 25, 133–165.
9.
Hartley, D. M.(1992). “Interpretation of Kostiakov infiltration parameters for borders.”J. Irrig. and Drain. Engrg., ASCE, 118, 156–165.
10.
Joshua, W. D. (1991). “Physical properties of the soils of Botswana.”Rep., Food and Agric. Org., Rome, Italy.
11.
Maheshwari, B. L.(1996). “Development of an automated double ring infiltrometer.”Australian J. Soil Res., 34, 709–714.
12.
Maheshwari, B. L., and McMahon, T. A.(1993). “Performance evaluation of border irrigation model for south-east Australia. I: Advance and recession characteristics.”J. Agric. Engrg. Res., U.K., 54, 67–87.
13.
Maheshwari, B. L., and Patto, P. M.(1990). “Present status of border irrigation design in Australia.”J. Agric. Engrg., Australia, 19, 8–10.
14.
McCuen, R. H., Leahy, R. B., and Johnson, P. A.(1990). “Problem with logarithmic transformation in regression.”J. Irrig. and Drain. Engrg., ASCE, 116, 414–428.
15.
McIntyre, D. S, Loveday, J., and Watson, C. L.(1982). “Field studies of water and salt movement in an irrigated swelling clay soil. I: Infiltration during ponding.”Australian J. Soil Res., 20, 81–90.
16.
Merriam, J. L., and Clemmens, A. J. (1985). “Time rated infiltrated depth families.”Proc., Devel. and Mgmt. Aspects of Irrig. and Drain. Sys., Irrig. and Drain. Div. Spec. Conf., ASCE, New York, N.Y., 67–74.
17.
Monro, J. C. (1971). “Direct search optimization in mathematical modelling and a watershed model application.”NOAA Tech. Memo., NWS/Hydro-12, U.S. Dept. of Commerce, Ofc. of Hydro., Silver Spring, Md.
18.
Philip, J. R.(1957). “The theory of infiltration. 1: The infiltration equation and its solution.”Soil Sci., 83, 345–357.
19.
Radke, J. K., and Berry, E. C.(1993). “Infiltration as a tool for detecting soil changes due to cropping, tillage and grazing livestock.”Am. J. Alternative Agr., 8, 164–174.
20.
Shouse, P. J., Ellsworth, T. R., and Jobes, J. A.(1994). “Steady state infiltration as a function of measurement scale.”Soil Sci., 157, 129–136.
21.
Smiles, D. E.(1976). “On the validity of the theory of flow in saturated swelling materials.”Australian J. Soil Res., 14, 389–395.
22.
Soil Conservation Service (SCS). (1974). “Border irrigation.”SCS national engineering handbook, U.S. Govt. Printing Ofc., Washington, D.C.
23.
Talsma, T.(1969). “In situ measurement of sorptivity.”Australian J. Soil Res., 7, 269–276.
24.
Tricker, A. S.(1978). “The infiltration cylinder: some comments on its use.”J. Hydro., Amsterdam, The Netherlands, 36, 383–391.
25.
Whoppers, M. C. S., Stein, A., Bouma, J., and Woodhead, T.(1992). “Sampling number and design for measurement of infiltration rates into puddled rice fields.”Agric. Water Mgmt., 21, 281–295.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.