3D Numerical Simulation of Turbulent Buoyant Flow and Heat Transport in a Curved Open Channel
Publication: Journal of Hydraulic Engineering
Volume 135, Issue 7
Abstract
A three-dimensional buoyancy-extended version of turbulence model was developed for simulating the turbulent flow and heat transport in a curved open channel. The density-induced buoyant force was included in the model, and the influence of temperature stratification on flow field was considered. The flow and temperature fields were simulated simultaneously. The model was validated by comparison with laboratory measurements, and the simulated fields were generally in good agreement with experimental data. A comparison of velocity fields in thermal and isothermal flow in curved open channel is presented and the effects of channel curvature and buoyant force on the velocity fields are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the National Center for Computational Hydroscience and Engineering, University of Mississippi for financial and technical support. The comments and suggestions provided by Professor Y. M. Shen at The Dalian University of Technology, Dr. F. Douglas Shields, Jr. of USDA-ARS National Sedimentation Laboratory, and Dr. Yan Ding, Dr. Weiming Wu, Dr. XinyaYing and Dr. Mustafa Altinakar at the University of Mississippi are highly appreciated.
References
Baumert, H., and Peters, H. (2004). “Turbulence closure, steady state, and collapse into waves.” J. Phys. Oceanogr., 34(2), 501–512.
Chant, R. J., and Wilson, R. E. (1997). “Secondary circulation in a highly stratified estuary.” J. Geophys. Res., 102(C10), 23207–23215.
Demuren, A. O., and Rodi, W. (1986). “Calculation of flow and pollutant dispersion in meandering channels.” J. Fluid Mech., 172(11), 63–92.
Ferziger, J. H., and Peric, M. (1999). Computational methods for fluid dynamics, 2nd Ed., Springer, Berlin.
Galperin, B., Sukoriansky, S., and Anderson, P. S. (2007). “On the critical Richardson number in stably stratified turbulence.” Atmos. Sci. Lett., 8(3), 65–69.
Geyer, W. R. (1993). “Three-dimensional tidal flow around headlands.” J. Geophys. Res., 98(C1), 955–966.
He, Y. Y., Fu, Y. F., Li, F. T., Jiang, J. Y., and Fu, D. C. (1992). “Preliminary experimental investigation on the properties of the thermal density flow in open channel bend.” Proc., 2nd National Symp. on Environmental Hydraulics, Beijing, 199–205.
Hicks, F. E., Jin, Y. C., and Steffler, P. M. (1990). “Flow near sloped bank in curved channel.” J. Hydraul. Eng., 116(1), 55–70.
Jia, Y., Scott, S., Xu, Y., Huang, S., and Wang, S. S. Y. (2005). “Three-dimensional numerical simulation and analysis of flows around a submerged weir in a channel bendway.” J. Hydraul. Eng., 131(8), 682–693.
Jia, Y. F., Kitamura, T., and Wang, S. S. Y., (2001). “Simulation of scour process in a plunge pool with loose material.” J. Hydraul. Eng., 127(3), 219–229.
Jia, Y. F., Wang, S. S. Y., and Zhu, T. T. (2004). “Validation of three-dimensional hydrodynamic model for flow at bend.” 6th Int. Conf. on Hydroscience and Engineering, Brisbane, Australia.
Kalkwijk, J. P. T., and Booij, R. (1986). “Adaptation of secondary flow in nearly-horizontal flow.” J. Hydraul. Res., 24(1), 19–36.
Lacy, J. R., and Monismith, S. G. (2001). “Secondary currents in a curved, stratified, estuarine channel.” J. Geophys. Res., 106(C12), 31283–31302.
Lai, Y. G., Weber, L. J., and Patel, V. C. (2003). “Nonhydrostatic three-dimensional model for hydraulic flow simulation. I: Formulation and verification.” J. Hydraul. Eng., 129(3), 196–205.
Leschziner, M. A., and Rodi, W. (1979). “Calculation of strongly curved open channel flow.” J. Hydr. Div., 103(10), 1297–1314.
Morvan, H., Pender, G., Wright, N. G., and Ervine, D. A. (2002). “Three-dimensional hydrodynamics of meandering compound channels.” J. Hydraul. Eng., 128(7), 674–682.
Nezu, I., and Nakagawa, H. (1993). “Turbulence in open channel flows.” IAHR monograph, Balkema, Rotterdam, The Netherlands.
Olsen, N. R. B. (2003). “Three-dimensional CFD modeling of self-forming meandering channel.” J. Hydraul. Eng., 129(5), 366–372.
Rodi, W. (1993). “Turbulence models and their application in hydraulics, a state-of-the art review, third edition.” IAHR Monograph, Balkema, Rotterdam, The Netherlands.
Rohr, J. J., Itsweire, E. C., Helland, K. N., and Van Atta, C. W. (1988). “Growth and decay of turbulence in a stably stratified shear flow.” J. Fluid Mech., 195(10), 77–111.
Seim, H. E., and Gregg, M. C. (1997). “The importance of aspiration and channel curvature in producing strong vertical mixing over a sill.” J. Geophys. Res., 102(C2), 3451–3472.
Shen, Y. M., Ng, C. O., and Ni, H. Q. (2003). “3D numerical modeling of non-isotropic turbulent buoyant helicoidal flow and heat transfer in a curved open channel.” Int. J. Heat Mass Transfer, 46(11), 2087–2093.
Shimizu, Y., Yamaguchi, H., and Itakura, T. (1990). “Three-dimensional computation of flow and bed deformation.” J. Hydraul. Eng., 116(9), 1090–1108.
Stone, H. L. (1968). “Iterative solution of implicit approximation of multidimensional partial differential equations.” SIAM (Soc. Ind. Appl. Math.) J. Numer. Anal., 5(3), 530–558.
Tekriwal, P. (1994). “Heat transfer predictions with extended turbulence model in radial cooling ducts rotating in orthogonal mode.” J. Heat Transfer, 116(5), 369–380.
Turner, J. S. (1973). Buoyancy effects in fluids, Cambridge University Press, Cambridge, U.K.
Wilson, C. A. M. E., Boxall, J. B., Guymer, I., and Olsen, N. R. B. (2003). “Validation of a three-dimensional numerical code in the simulation of pseudo-meandering flows.” J. Hydraul. Eng., 129(10), 758–768.
Wu, W., Rodi, W., and Wenka, T. (2000). “3D numerical modeling of flow and sediment transport in open channels.” J. Hydraul. Eng., 126(1), 4–15.
Ye, J., and McCorquodale, J. A. (1998). “Simulation of curved open channel flows by 3D hydrodynamic model.” J. Hydraul. Eng., 124(7), 687–698.
Yu, T. S., and Li, C. W. (1998). “Instantaneous discharge of buoyant fluid in cross-flow.” J. Hydraul. Eng., 124(7), 1161–1176.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Apr 20, 2006
Accepted: Jan 9, 2009
Published online: Jun 15, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.