Numerical Study of Turbidity Currents with Sudden-Release and Sustained-Inflow Mechanisms
Publication: Journal of Hydraulic Engineering
Volume 134, Issue 9
Abstract
A well-tested numerical model based on the Reynolds averaged Navier–Stokes equations with turbulence closure is further validated against three groups of experimental data on lock-exchange gravity flows. The model is then applied to study larger-scale turbidity currents with sudden-release and/or sustained inflow mechanisms. At the field-scale, sudden-release turbidity currents are found to be essentially unsteady with depth-averaged flow variables varying with time and distance from the upstream boundary. Turbidity currents with sustained inflows reach a quasi-equilibrium state in the body of the current. The simulation of a turbidity current initiated by sudden-release and then fed by sustained inflow reveals that, initially, two bore heads appear in the current with the second bore head resulting from sustained inflow and eventually catches up with the first one. Model results show that, depending on onset mechanism and slope, if the erosion rate of sediment exceeds the deposition rate, turbidity currents at the field scale can experience self-acceleration, a process predicted earlier by theory but not demonstrated in laboratory experiments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by Shell International Exploration & Production Company. The authors gratefully acknowledge the funding and permission to publish these results. The second writer also acknowledges funding from the National Science Foundation CAREER award (0134167). The writers would like to thank Michael E. Meadow for his editorial assistance with the paper. Comments from three anonymous reviewers were helpful.
References
Antar, N., and Moodie, T. B. (2003), “Weakly nonhydrostatic effects in compositionally driven gravity flows.” Stud. Appl. Math., 111(2), 239–267.
Benjamin, T. B. (1968), “Gravity currents and related phenomena.” J. Fluid Mech., 31, 209–248.
Bonnecaze, R. T., Huppert, H. E., and Lister, J. R. (1993), “Particle-driven gravity currents.” J. Fluid Mech., 250, 339–369.
Bonnecaze, R. T., Huppert, H. E., and Lister, J. R. (1996), “Patterns of sedimentation from polydispersed turbidity currents.” Proc. R. Soc. London, Ser. A, 452, 2247–2261.
Bouma, A. H., Normark, W. R., and Barnes, N. E., eds. (1985). “Submarine fans and related turbidite systems.” Springer, New York.
Britter, R. E., and Linden, P. F. (1980). “The motion of the front of a gravity current traveling down an incline.” J. Fluid Mech., 99(3), 531–543.
Cebeci, T., and Bradshaw, P. (1977). “Momentum transfer in boundary layers.” Hemisphere, Washington, D.C.
Chien, N., and Wan, Z. (1999). “Mechanics of sediment transport.” ASCE.
Choi, S., and Garcia, M. H. (2002). “ turbulence modeling of density currents developing two dimensionally on a slope.” J. Hydraul. Eng., 128(1), 55–63.
Dade, W. B., and Huppert, H. E. (1995). “A box-model for non-entraining, suspension-driven gravity surges on horizontal surfaces.” Sedimentology, 42, 453–471.
D’Alessio, S. J. D., Pascal, J. P., and Moodie, T. B. (2004). “Thermally enhanced gravity driven flows.” J. Comput. Appl. Math., 170(1), 1–25.
Dietrich, W. E. (1982). “Settling velocity of natural particles.” Water Resour. Res., 18, 1615–1626.
Ellison, T. H., and Turner, J. S. (1959). “Turbulent entrainment in stratified flows.” J. Fluid Mech., 6, 423–448.
Felix, M. (2001). “A two-dimensional numerical model for a turbidity current.” Spec. Publ. Int. Ass. Sediment., 31, 71–81.
Garcia, M. (1993). “Hydraulic jumps in sediment-driven bottom currents.” J. Hydraul. Eng., 119(10), 1094–1117.
Garcia, M. (1994). “Depositional turbidity currents laden with poly sorted sediment.” J. Hydraul. Eng., 120(11), 1240–1263.
Gladstone, C., Phillips, J. C., and Sparks, R. S. J. (1998). “Experiments on bidisperse, constant volume gravity currents: Propagation and sediment deposition.” Sedimentology, 45, 833–844.
Gladstone, C., and Woods, A. W. (2000). “On the application of box models to particle-driven gravity currents.” J. Fluid Mech., 416, 187–195.
Hartel, C., Meiburg, E., and Necker, F. (2000). “Analysis and direct numerical simulation of the flow at a gravity-current.” J. Fluid Mech., 418, 189–229.
Henkes, R. A., Flugt, W. M., and Hoogendoorn, C. J. (1991). “Natural convection flow in a square cavity calculated with low-Reynolds number turbulence models.” Int. J. Heat Mass Transfer, 34, 1543–1557.
Huang, H., Imran, J., and Pirmez, C. (2005). “Numerical model of turbidity currents with a deforming bottom boundary.” J. Hydraul. Eng., 131(4), 283–293.
Huang, H., Imran, J., and Pirmez, C. (2007). “Numerical modeling of poorly sorted depositional turbidity currents.” J. Geophys. Res., 112, 1–15.
Huppert, H. E., and Simpson, J. E. (1980). “The slumping of gravity currents.” J. Fluid Mech., 99, 785–799.
Imran, J., Islam, M. A., Huang, H., Kassem, A., Dickerson, J., Pirmez, C., and Parker, G. (2007). “Helical flow couplets in submarine gravity underflows.” Geology, 35(7), 659–662.
Iaccarino, G., and Durbin, P. (2000). “Unsteady 3D RANS simulations using the model.” Center for Turbulence Research Annual Research Briefs 2000, 263–269.
Lamb, M., Toniolo, H., and Parker, G. (2006). “Trapping of sustained turbidity currents by intraslope minibasins.” Sedimentology, 53, 147–160.
Lay, Y. G., Weber, L. J., and Patel, V. C. (2003). “Nonhydrostatic three-dimensional model for hydraulic flow simulation. I and II.” J. Hydraul. Eng., 129(3), 196–214.
Mastbergen, D. R., and Van Den Berg, J. H. (2003). “Breaching in fine sands and the generation of sustained turbidity currents in submarine canyons.” Sedimentology, 50, 625–637.
Middleton, G. V. (1993). “Sediment deposition from turbidity currents.” Fire Technol., 21, 89–114.
Moodie, T. B. (2000). “Hydraulic theory and particle-driven gravity currents.” Stud. Appl. Math., 105, 115–120.
Necker, F., Hartel, C., Kleiser, L., and Meiburg, E. (2002). “High-resolution simulations of particle driven gravity currents.” Int. J. Multiphase Flow, 28(2), 279–300.
Olsen, N. R. B. (2003). “Three-dimensional CFD modeling of self-forming meandering channel.” J. Hydraul. Eng., 129(5), 366–372.
Patterson, M. D., Simpson, J. E., Dalziel, S. B., and Nikiforakis, N. (2005). “Numerical modeling of two-dimensional and axisymmetric gravity currents.” Int. J. Numer. Methods Fluids, 47(10–11), 1221–1227.
Parker, G., Fukushima, Y., and Pantin, H. (1986). “Self-accelerated turbidity currents.” J. Fluid Mech., 171, 145–181.
Parker, G., Garcia, M., Fukushima, Y., and Yu, W. (1987). “Experiments on turbidity currents over an erodable bed.” J. Hydraul. Res., 25, 123–147.
Pratson, L. F., and Haxby, W. F. (1996). “What is the slope of the U.S. continental slope?” Geology, 24(1), 3–6.
Rottman, J. W., and Simpson, J. E. (1983). “Gravity currents produced by instantaneous releases of a heavy fluid in a rectangular channel.” J. Fluid Mech., 135, 95–110.
Shin, J. O., Dalziel, S. B., and Linden, P. F. (2004). “Gravity currents produced by lock-exchange.” J. Fluid Mech., 521, 1–34.
Smith, J. D., and McLean, S. R. (1977). “Spatially averaged flow over a wavy surface.” J. Geophys. Res., 83, 1735–1746.
von Kármán, T. (1940). “The engineer grapples with nonlinear problems.” Bull. Am. Math. Soc., 46, 615–683.
van Rijn, L. C. (1984). “Sediment transport. I: Bed load transport.” J. Hydraul. Eng., 110(10), 1431–1456.
Wu, W., Rodi, W., and Wenka, T. (2000). “3D numerical modeling of flow and sediment transport in open channels.” J. Hydraul. Eng., 126(1), 4–15.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 11, 2007
Accepted: Jan 14, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.