Hydraulic Characteristics of Gabion-Stepped Weirs
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 134, Issue 8
Abstract
Experimental studies on the hydraulics of flow through and over gabion-stepped weirs are presented. Two flow components were observed, i.e., base flow through the void between filled stones and overflow on the gabions. The energy loss ratios in the gabion-stepped weirs are greater than those in the corresponding horizontal stepped weirs by approximately 7, 10, and 14% for weir slopes of 30, 45, and , respectively. As a result, the velocity at the outlet is lower. Stone size and shape have little influence on the energy loss and flow velocity as compared to the increasing effect of the weir slope. The pressure acting on the step face for the gabion-stepped weirs is less than that of the horizontal steps owing to the cushioning effect generated by filled stones. To reduce pressure on a step face at a fixed discharge for different weir slopes, the void ratio of the filled stones should be low to allow a small amount of base flow. The pressure distribution pattern on the horizontal face of a step is provided.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank the Commission on Higher Education (CHE), and the Thailand Research Fund (TRF) under Grant No. UNSPECIFIEDRMU4880003 for providing financial support for this study.
References
Andre, S. (2004). “High velocity aerated flows on stepped chutes with macro-roughness elements.” Communication 20, A. Schleiss, ed., Ecole Polytechnique Federale de Lausanne, Laboratoire de Constructions Hydrauliques, Lausanne, Switzerland.
Boes, R. M., and Hager, W. H. (2003a). “Hydraulic design of stepped spillways.” J. Hydraul. Eng., 129(9), 671–679.
Boes, R. M., and Hager, W. H. (2003b). “Two-phase flow characteristics of stepped spillways.” J. Hydraul. Eng., 129(9), 661–670.
Chanson, H., Yasuda, Y., and Ohtsu, I. (2002). “Flow resistance in skimming flows in stepped spillways and its modeling.” Can. J. Civ. Eng., 29(6), 809–819.
Diez-Cascon, J., Blanco, J., Revilla, J., and Garcia, R. (1991). “Studies on the hydraulic behaviour of stepped spillways.” Int. Water Power Dam Constr., 43(9), 22–26.
Ohtsu, I., Yasuda, Y., and Takahashi, M. (2004). “Flow characteristics of skimming flows in stepped channels.” J. Hydraul. Eng., 130(9), 860–869.
Pegram, G. G. S., Officer, A. K., and Mottram, S. R. (1999). “Hydraulics of skimming flow on modeled stepped spillways.” J. Hydraul. Eng., 125(5), 500–510.
Peyras, L., Royet, P., and Degoutte, G. (1992). “Flow and energy dissipation over stepped gabion weirs.” J. Hydraul. Eng., 118(5), 707–717.
Sanchez, J. M., Pomares, J., and Dolz, J. (2000). “Pressure field in skimming flow over a stepped spillway.” Proc., Int. Workshop on Hydraulics of Stepped Spillways, H. E. Minor and W. H. Hager, eds., A.A. Balkema, Zurich, Switzerland, 137–145.
Stephenson, D. (1979). “Gabion energy dissipators.” Proc., 13th ICOLD Congress, Q.50, R.3, New Delhi, India, 33–43.
Stephenson, D. (1988). “Stepped energy dissipators.” Proc., Int. Symp. on Hydraulics for High Dams, IAHR, Beijing, 1228–1235.
Yasuda, Y., and Ohtsu, I. (1999). “Flow resistance of skimming flows in stepped channels.” Proc., 28th IAHR Congress (CD-ROM), IAHR, Graz, Austria, Session B14, 6 fpage.
Information & Authors
Information
Published In
Copyright
© 2008 American Society of Civil Engineers.
History
Received: Jan 18, 2006
Accepted: Nov 27, 2007
Published online: Aug 1, 2008
Published in print: Aug 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.