Hydraulic Jump in Sloping Channels
Publication: Journal of Hydraulic Engineering
Volume 117, Issue 7
Abstract
The transition from supercritical to subcritical flow in sloping channels is systematically investigated under a wide range of slopes. The hydraulic conditions for the formation of D‐jump, where the entire jump is formed on the slope, and B‐jump, where the jump is formed partly in the sloping portion and partly in the horizontal channel portion, are determined. Also, practical equations for the sequent depths and the length of the jumps are proposed. For the streamwise decay of the maximum velocity in the transition zone, the analogy with the wall jet is discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bakhmeteff, B. A., and Matzke, A. E. (1938). “The hydraulic jump in sloped channels.” Trans., ASME, 60, 111–118.
2.
Beltaos, S., and Rajaratnam, N. (1973). “Plane turbulent impinging jets.” J. Hydr. Res., IAHR, 11(1), 29–59.
3.
Bradley, J. N., and Peterka, A. J. (1957). “Hydraulic design of stilling basins: Stilling basin with sloping apron (Basin V), “J. Hydr. Div., ASCE, 83(5), 1–32.
4.
Hager, W. H. (1988). “B‐jump in sloping channel.” J. Hydr. Res., IAHR, 26(5), 539–558.
5.
Hickox, H. (1944). Discussion of “The hydraulic jump in sloping channels,” by C. E. Kindsvater. Trans., ASCE, 109, 1141–1146.
6.
Kawagoshi, N., and Hager, W. H. (1990). “B‐jump in sloping channel, II.” J. Hydr. Res., IAHR, 28(4), 461–80.
7.
Kindsvater, C. E. (1944). “The hydraulic jump in sloping channels.” Trans., ASCE, 109, 1107–1120.
8.
Ohtsu, I., and Yasuda, Y. (1990). Discussion of “B‐jump in sloping channel,” by W. H. Hager. J. Hydr. Res., IAHR, 28(1), 105–119.
9.
Pani, B. S., and Jayaraman, V. V. (1975). Discussion of “Flow characteristics of sloping channel jumps,” by N. Rajaratnam and V. Murahari. J. Hydr. Div., ASCE, 101(6), 1016–1017.
10.
Rajaratnam, N. (1976). Turbulent jets (Developments in Water Science 5). Elsevier Pub. Co.
11.
Rajaratnam, N., and Murahari, V. (1974). “Flow characteristics of sloping channel jumps.” J. Hydr. Div., ASCE, 100(6), 731–740.
12.
chauer, J. J., and Eustis, R. H. (1963). “The flow development and heat transfer characteristics of plane turbulent impinging jets.” Technical Report 3, Dept. of Mechanical Engineering, Stanford Univ., Stanford, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jul 1, 1991
Published in print: Jul 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.