River Morphology and Thresholds
Publication: Journal of Hydraulic Engineering
Volume 111, Issue 3
Abstract
The regime geometry and channel patterns of alluvial rivers are analyzed Wing an energy approach together with physical relationships of flow continuity, flow resistance, and sediment transport. Because of the discontinuity in flow resistance, and thus in power expenditure, between lower and upper flow regimes, the adjustment in river regime consists of sudden changes in channel geometry, channel pattern, and sometimes silt‐clay content, when such a discontinuity is crossed. Thresholds or discontinuities in river morphology are obtained in the analysis. In accordance with such thresholds, rivers of distinct morphological features are classified into four regions based upon the bankfull discharge, channel slope, and median size of bed sediment. Their respective features are described, and certain regime relationships for channel width and depth are established. The predicted channel geometries are compared with river data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ackers, P., and Charlton, F. G., “The Geometry of Small Meandering Channels,” Proceedings, Institute Civil Engineers, Paper 73285, 1970, pp. 289–317.
2.
Brice, J. C., and Blodgett, J. C., “Countermeasures for Hydraulic Problems at Bridges, Vol. 1, Analysis and Assessment,” Report No. FHWA‐RD‐78‐162, Federal Highway Administration, Washington, D.C., 1978, 169 pp.
3.
Chang, H. H., “Minimum Stream Power and River Channel Patterns,” Journal of Hydrology, Vol. 41, Elsevier Scientific Publishing Co., Amsterdam, The Netherlands, 1979, pp. 303–327.
4.
Chang, H. H., “Stable Alluvial Canal Design,” Journal of the Hydraulics Division, ASCE, Vol. 105, No. HY5, Proc. Paper 15420, May, 1980, pp. 873–891.
5.
Chang, H. H., “A Mathematical Model for Erodible Channels,” Journal of the Hydraulics Division, ASCE, Vol. 108, No. HY5, Proc. Paper 17062, May, 1982, pp. 678–689.
6.
Chang, H. H., “Fluvial Hydraulics of Deltas and Alluvial Fans,” Journal of the Hydraulics Division, ASCE, Vol. 108, No. HY11, Nov., 1982, pp. 1282–1295.
7.
Chang, H. H., “Energy Expenditure in Curved Open Channels,” Journal of Hydraulic Engineering, ASCE, Vol. 109, No. 7, July, 1983, pp. 1012–1022.
8.
Chang, H. H., “Analysis of River Meanders,” Journal of Hydraulic Engineering, ASCE, Vol. 110, No. 1, Jan., 1984, pp. 37–50.
9.
Cherkauer, D. S., “Minimization of Power Expenditure in a Riffle‐Pool Alluvial Channel,” Water Resources Research, Vol. 9, No. 6, Dec., 1973, pp. 1613–1628.
10.
Chitale, S. V., “Theories and Relationships of River Channel Patterns,” Journal of Hydrology, Vol. 19, 1973, pp. 285–308.
11.
Friedkin, J. F., A Laboratory Study of the Meandering of Alluvial Rivers, U.S. Waterways Experiment Station, Vicksburg, Miss., May, 1945, 43 pp.
12.
Henderson, F. M., Open Channel Flow, The Macmillan Company, New York, N.Y., 1966, 522 pp.
13.
Kennedy, J. F., and Brooks, N. H., “Laboratory Study of Alluvial Streams at Constant Discharge,” Proceedings, Federal Interagency Sedimentation Conference, Miscellaneous Publication No. 970, Agricultural Research Service, 1963, pp. 320–330.
14.
Lane, E. W., “A Study of the Shape of Channels formed by Natural Streams Flowing in Erodible Material,” M.R.D. Sediment Series No. 9, U.S. Army Engineering Division, Missouri River, Corps of Engineers, 1957.
15.
Leopold, L. B., and Maddock, T., “The Hydraulic Geometry of Stream Channels and Some Physiographic Implications,” USGS Professional Paper 252, 1953, 57 pp.
16.
Leopold, L. B., and Wolman, M. G., “River Channel Patterns: Braided, Meandering and Straight,” USGS Professional Paper 282‐B, 1957, pp. 45–62.
17.
Leopold, L. B., Wolman, M. G., and Miller, J. P., Fluvial Processes in Geomorphology, W. H. Freeman and Co., San Francisco, Calif., 1964, 522 pp.
18.
Mackin, J. H., “Concept of the Graded River,” Geological Society of America Bulletin, Vol. 59, May, 1948, pp. 463–512.
19.
Odgaard, A. J., “Transverse Bed Slope in Alluvial Channel Bends,” Journal of the Hydraulics Division, ASCE, Vol. 107, No. HY12, Dec., 1981, pp. 1677–1694.
20.
Onishi, Y., Jain, S. C., and Kennedy, J. F., “Effects of Meandering in Alluvial Streams,” Journal of the Hydraulics Division, ASCE, Vol. 107, No. HY7, Proc. Paper 12248, July, 1976, pp. 899–917.
21.
Parker, G., “On the Cause and Characteristic Scales of Meandering and Braiding in Rivers,” Journal of Fluid Mechanics, Vol. 76, Part 3, 1976, pp. 457–480.
22.
Personal communication with D. A. Twogood, Imperial Irrigation District, Imperial, Calif.
23.
Punjab Irrigation Research Institute, Report for the Year Ending April 1941, Lahore, Punjab, Superintendent of Government Printing, 1943, 234 pp.
24.
Richards, K. S., “Channel Width and Riffle‐Pool Sequence,” Geological Society of America Bulletin, Vol. 87, June, 1976, pp. 883–890.
25.
Rozovskii, I. L., “Flow of Water in Bends of Open Channels,” Israel Program for Scientific Translations, Jerusalem, Israel, 1961, available from Office of Technical Services, U.S. Department of Commerce, Washington D.C., PST Catalog No. 363, OTS 60‐51133.
26.
Schumm, S. A., “The Shape of Alluvial Channels in Relation to Sediment Type,” USGS Professional Paper 352B, 1960, pp. 17–30.
27.
Schumm, S. A., “Sinuosity of Alluvial Rivers on the Great Plains,” Geological Society of America Bulletin, Vol. 74, Sept., 1963, pp. 1089–1100.
28.
Schumm, S. A., “River Adjustments to Altered Hydrologic Regimen‐Murrumbidgee River and Paleochannels, Australia,” U.S. Geological Survey Professional Paper 598, 1968, 65 pp.
29.
Schumm, S. A., and Khan, H. R., “Experimental Study of Channel Patterns,” Geological Society of America Bulletin, Vol. 83, 1972, pp. 1755–1770.
30.
Schumm, S. A., “Geomorphic Thresholds and Complex Response of Drainage Systems,” in Fluvial Geomorphology, M. Morisawa, ed., State University of New York, Binghamton, N.Y., 1974, pp. 299–310.
31.
Schumm, S. A., The Fluvial System, John Wiley and Sons, New York, N.Y., 1977, 338 pp.
32.
Sedimentation Engineering, Manual No. 54, ASCE, 1975.
33.
Simons, D. B., and Albertson, M. L., “Uniform Water‐Conveyance Channels in Alluvial Material,” Journal of the Hydraulics Division, ASCE, Vol. 86, No. HY5, Proc. Paper 2484, May, 1960, pp. 33–71.
34.
Simons, D. B., and Richardson, E. V., “Resistance to Flow in Alluvial Channels,” U.S. Geological Survey Professional Paper 422‐J, 1966.
35.
Yang, C. T., and Song, C. S., “Theory of Minimum Rate of Energy Dissipation,” Journal of the Hydraulics Division, ASCE, Vol. 105, No. HY7, Proc. Paper 14677, July, 1979, pp. 769–784.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Mar 1, 1985
Published in print: Mar 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.