Scale Effects in Pump Sump Models
Publication: Journal of Hydraulic Engineering
Volume 110, Issue 11
Abstract
Experiments were conducted using one full‐sized and two reducedscale models of a pump sump to geometric scales of 1:2 and 1:4 to determine whether scale effects distort the predictive ability of hydraulic models of pump sumps with such large scale ratios. Possible scale effects on vortexing, pipe swirl, inlet losses, and air ingestion due to air‐drawing vortices have been examined using the experimental results. No significant scale effects on free‐surface vortexing were evident in the tested ranges. Pipe flow swirl and inlet losses were seen to exhibit some scale effects. The air‐core vortices encountered were generally weak with very low air withdrawals. Within the accuracy of measurements of air‐withdrawal rates, the model did not indicate any gross underprediction of air withdrawals.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anwar, H. O., Weller, J. A., and Amphlett, M. B., “Similitude of Free Vortex at Horizontal Intake,” Journal of Hydraulic Research, IAHR, Vol. 16, No. 2, 1978.
2.
Baker, D. W., and Sayre, C. F., “Decay of Swirling Turbulent Flow of Incompressible Fluids in Long Pipes,” Flow—Its Measurement and Control in Science and Industry, Vol. 2, Instrument Society of America, 1974, pp. 301–312.
3.
Daggett, L. K., and Keulegan, G. H., “Similitude Conditions in Free Surface Vortex Formations,” Journal of the Hydraulics Division, ASCE, Vol. 100, Nov., 1974, pp. 1565–1581.
4.
Denny, D. F., “An Experimental Study of Air‐Entraining Vortices in Pump Sumps,” Journal of the Institution of Mechanical Engineers, Vol. 170, No. 2, London, England, 1956, pp. 106–116.
5.
De Siervi, F., Viguier, H. C., Greitzer, E. M., and Tan, C. S., “Mechanism of Inlet‐Vortex Formation,” Journal of Fluid Mechanics, Vol. 124, 1982, pp. 173–207.
6.
Dicmas, J. L., “Development of an Optimum Sump Design for Propeller and Mixed Flow Pumps,” Paper 67‐FE‐26, presented at the May, 1967, ASCE Fluids Engineering Conference, held at Chicago, Ill.
7.
Durgin, W. W., and Hecker, G. E., “The Modeling of Vortices at Intake Structures,” Proceedings of the ASCE/ASME/IAHR Joint Symposium on Design and Operation of Fluid Machinery, Vol. 1, Colorado State University, Fort Collins, Colo., June, 1978, pp. 381–391.
8.
Florajancic, D., “Influence of Gas and Air Admission on the Behavior of Single and Multi‐Stage Pumps,” Sulzer Research Number, 1979.
9.
Hecker, G. E., “Model‐Prototype Comparison of Free Surface Vortices,” Journal of the Hydraulics Division, ASCE, Oct., 1981.
10.
Jain, A. K., Raju, K. G. R., and Garde, R. J., “Vortex Formation at Vertical Pipe Intakes,” Journal of the Hydraulics Division, ASCE, Aug., 1978.
11.
Murakami, M., Raju, K. G. R., and Garde, R. J., “Flow of Entrained Air in Centrifugal Pumps,” presented at the August 31–September 5, 1969, IAHR 13th Congress, held in Japan.
12.
Nystrom, J. B., Padmanabhan, M., and Hecker, G. E., “Modeling Flow Characteristics of Reactor Sumps,” Journal of the Energy Division, ASCE, Vol. 108, Nov., 1982, pp. 169–183.
13.
Padmanabhan, M., and Janik, C. R., “Swirling Flow and Its Effect on Wall Pressure Drop Within Pipes,” presented at the November, 1980, ASME Winter Annual Meeting, Symposium on Vortex Flows, held in Chicago, Ill.
14.
Padmanabhan, M., “A Parametric Study of the Hydraulic Performance of Containment Emergency Sumps with Horizontal Double‐Outlets,” Alden Research Laboratory Report No. 46A‐82, Sept., 1982.
15.
Padmanabhan, M., “A Parametric Study of the Hydraulic Performance of Containment Emergency Sumps with Vertical Double‐Outlets,” Alden Research Laboratory Report No. 47A‐82, Aug., 1982.
16.
Padmanabhan, M., and Hecker, G. E., “Assessment of Scale Effects on Vortexing, Swirl and Inlet Losses in Large Scale Sump Models,” Alden Research Laboratory Report No. 48A‐82, Sept., 1982.
17.
Patel, B. R., and Runstadler, Jr., “Investigations into the Two‐Phase Flow Behavior of Centrifugal Pumps,” presented at the December, 1978, ASME Winter Annual Meeting on Polyphase Flow in Turbo Machinery, held at San Francisco, Calif.
18.
Reddy, Y. R., and Pickford, J. A., “Swirl Angle Distribution in Pump Inlets in a Circular Sump,” Pumps 1979, 6th Technical Conference of British Pump Manufacturer's Association, Canterbury, England, Mar. 28–30, 1979.
19.
Wolfe, L., Lavan, Z., and Fejer, A. A., “Measurement of the Decay of Swirl in Turbulent Flow,” AIAA Journal, Vol. 7, May, 1969.
20.
Zajdlik, M., “New Checking Mode of Model Parameter for Vortex Formation in Pump Tanks,” Proceedings of the 17th Congress, IAHR, Vol. 5, Baden‐Baden, West Germany, Aug., 1977, pp. 379–386.
21.
Zielinksi, P. B., and Villemonte, J. R., “Effect of Viscosity on Vortex‐Orifice Flow,” Journal of the Hydraulics Division, ASCE, May, 1968.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Nov 1, 1984
Published in print: Nov 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.