Externally Reinforced Welded I-Beam-to-Box-Column Seismic Connection
Publication: Journal of Engineering Mechanics
Volume 136, Issue 1
Abstract
This paper presents an externally reinforced I-beam-to-box-column seismic connection. An inclined rib-plated collar-plated configuration with web plates is used to ensure planar continuity between I-beam and box-column webs; the rib plates, inclined in plan between the beam web and the two column web planes, along with collar-plates encircling the box-column at beam flange levels and web plates in plane with the rib plates at the beam web level constitute the new configuration. This connection configuration relieves stresses on box-column flanges and helps in force transfer to the box-column webs. Performance evaluation of the proposed connection configuration shows that sufficient inelasticity is mobilized in the beam away from the column face with connection elements and welds remaining elastic. The seismic performance of the proposed connection is also found to be better than two state-of-the-art connection schemes in terms of higher strength, stiffness, and higher reserve strength of the welds under cyclic displacement loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Institute of Steel Construction (AISC). (2001). Manual of steel construction—Load and resistance factor design, 3rd Ed., Chicago.
American Institute of Steel Construction (AISC). (2005). Seismic provisions for structural steel buildings, Chicago.
Arlekar, J. N., and Murty, C. V. R. (2004). “Improved truss model for design of welded steel moment-resisting frame connections.” J. Struct. Eng., 130(3), 498–510.
Goel, S. C., Stojadinović, B., and Lee, K. -H. (1997). “Truss analogy for steel moment connections, Eng. J., 34(2), 43–53.
Goswami, R. (2007). “Seismic design of welded connections in steel moment resisting frame buildings with square box columns.” Ph.D. thesis, Indian Institute of Technology Kanpur, India.
Hiroshi, M., and Tanaka, A. (2000). “Statical characteristics of the improved beam-to-column connections of steel structure.” Proc., 12th World Conf. on Earthquake Engineering, Auckland, New Zealand.
HKS. (2005). ABAQUS/Standard user’s manual, ABAQUS Inc., Pawtucket, R.I.
Kim, Y. -J., and Oh, S. -H. (2007). “Effect of the moment transfer efficiency of a beam web on deformation capacity at box column-to-h beam connections.” J. Constr. Steel Res., 63(1), 24–36.
Lee, K. -K., Goel, S. C., and Stojadinović, B. (2000). “Boundary effects in steel moment connections.” Proc., 12th World Conf. on Earthquake Engineering, Auckland, New Zealand.
Lee, S. L., Ting, L. C., and Shanmugam, N. E. (1993). “Use of external t-stiffeners in box-column to i-beam connections.” J. Constr. Steel Res., 26(2-3), 77–98.
Miller, D. K. (1998). “Lessons learned from the Northridge earthquake.” Eng. Struct., 20(4–6), 249–260.
Plottel, P. B., and Engelhardt, M. D. (1991). “The use of rectangular steel box members in the U.S. building construction industry.” Rep. No. PMFSEL 91-4, Ferguson Structural Engineering Laboratory, University of Texas.
Popov, E. P., and Bertero, V. V. (1973). “Cyclic loading of steel building connections.” J. Struct. Eng., 99(6), 1189–1204.
Richard, R., Partridge, J. E., Allen, J., and Radhu, S. (1995). “Finite element analysis and tests of beam-to-column connections.” Modern steel construction, AISC, Chicago, Ill.
Ricker, D. T. (1985). “Practical tubular connections.” Proc., Symp. on Hollow Structural Sections in Building Construction, ASCE, Reston, Va.
Ricles, J. M., Peng, S. W., and Lu, L. W. (2004). “Seismic behavior of composite concrete filled tube column-wide flange beam moment connections.” J. Struct. Eng., 130(2), 223–232.
SAC Joint Venture. (2000). “Recommended seismic design criteria for new steel moment-frame buildings.” FEMA 350, FEMA, Washington, D.C.
Shanmugam, N. E., Ting, L. C., and Lee, S. L. (1993). “Static behaviour of i-beam to box-column connections with external stiffeners.” Struct. Eng., 71(15), 269–275.
Ting, L. C., Shanmugam, N. E., and Lee, S. L. (1991). “Box-column to i-beam connections with external stiffeners.” J. Constr. Steel Res., 18(3), 209–226.
Tsai, K. C., Wu, S., and Popov, E. P. (1995). “Cyclic performance of steel beam-column moment joints.” Eng. Struct., 17(8), 596–602.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 11, 2008
Accepted: Aug 10, 2009
Published online: Dec 15, 2009
Published in print: Jan 2010
Notes
Note. Associate Editor: Henri P. Gavin
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.