Multivariate Statistical Approach to Structural Damage Detection
Publication: Journal of Engineering Mechanics
Volume 136, Issue 1
Abstract
The issue of structural damage detection is addressed through an innovative multivariate statistical approach in this paper. By invoking principal component analysis, the vibration responses acquired from the structure being monitored are represented by the multivariate data of the sample principal component coefficients (PCCs). A damage indicator is then defined based on a multivariate exponentially weighted moving average control chart analysis formulation, involving special procedures to allow for the effects of the estimated parameters and to determine the upper control limits in the control chart analysis for structural damage detection applications. Also, a data shuffling procedure is proposed to remove the autocorrelation probably present in the obtained sample PCCs. This multivariate statistical structural damage detection scheme can be applied to either the time domain responses or the frequency domain responses. The efficacy and advantages of the scheme are demonstrated by the numerical examples of a five-story shear frame and a shear wall as well as the experimental example of the I-40 Bridge benchmark.
Get full access to this article
View all available purchase options and get full access to this article.
References
Carden, E. P., and Fanning, P. (2004). “Vibration based condition monitoring: A review.” Struct. Health Monit., 3(4), 355–377.
Chang, F. -K. (2007). Proc., 1st-6th Int. Workshops on Structural Health Monitoring, Stanford Univ., Stanford, Calif.
Ching, J., and Beck, J. L. (2004). “Bayesian analysis of the Phase II IASC-ASCE structural health monitoring experimental benchmark data.” J. Eng. Mech., 130(10), 1233–1244.
Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods.” Shock Vib. Dig., 30(2), 91–105.
Fanning, P., and Carden, E. P. (2001). “Auto-regression and statistical process control techniques applied to damage indication in telecommunication masts.” Key Eng. Mater., 204–205, 251–260.
Farrar, C. R., et al. (1994). “Dynamic characterization and damage detection in the I-40 Bridge over the Rio Grande.” Los Alamos National Laboratory Rep. No. LA-12767-MS, Los Alamos National Laboratory, Los Alamos, N.M.
Fugate, M. L., Sohn, H., and Farrar, C. R. (2001). “Vibration-based damage detection using statistical process control.” Mech. Syst. Signal Process., 15(4), 707–721.
Giraldo, D. F., Dyke, S. J., and Caicedo, J. M. (2006). “Damage detection accommodating varying environmental conditions.” Struct. Health Monit., 5(2), 155–172.
Jensen, W. A., Jones-Farmer, L. A., Champ, C. W., and Woodall, W. H. (2006). “Effects of parameter estimation on control chart properties: A literature review.” J. Quality Technol., 38(4), 349–364.
Johnson, R. A., and Wichern, D. W. (2002). Applied multivariate statistical analysis, 5th Ed., Prentice-Hall, Upper Saddle River, N.J.
Kullaa, J. (2003). “Damage detection of the Z24 Bridge using control charts.” Mech. Syst. Signal Process., 17(1), 163–170.
Lam, H. F., Katafygiotis, L. S., and Mickleborough, N. C. (2004). “Application of a statistical model updating approach on Phase I of the IASC-ASCE structural health monitoring benchmark study.” J. Eng. Mech., 130(1), 34–48.
Lowry, C. A., Woodall, W. H., Champ, C. W., and Rigdon, S. E. (1992). “A multivariate exponentially weighted moving average control chart.” Technometrics, 34(1), 46–53.
Montgomery, D. C. (2005). Introduction to statistical quality control, 5th Ed., Wiley, New York.
Nair, K. K., and Kiremidjian, A. S. (2007). ““Time series based structural damage detection algorithm using Gaussian mixtures modeling.” ASME J. Dyn. Syst., Meas., Control, 129(3), 285–293.
Nair, K. K., Kiremidjian, A. S., and Law, K. H. (2006). “Time series-based damage detection and localization algorithm with application to the ASCE benchmark structure.” J. Sound Vib., 291(1–2), 349–368.
Pi, Y. L., and Mickleborough, N. C. (1989a). “Modal identification of vibrating structures using ARMA model.” J. Eng. Mech., 115(10), 2232–2250.
Pi, Y. L., and Mickleborough, N. C. (1989b). “Modal identification of a vibrating structure in the time domain.” Comput. Struct., 32(5), 1105–1115.
Sohn, H., Czarnecki, J. A., and Farrar, C. R. (2000a). “Structural health monitoring using statistical process control.” J. Struct. Eng., 126(11), 1356–1363.
Sohn, H., Farrar, C. R., Hemez, F. M., Shunk, D. D., Stinemates, D. W., and Nadler, B. R. (2003). “A review of structural health monitoring literature: 1996–2001.” Los Alamos National Laboratory Rep. No. LA-13976-MS, Los Alamos National Laboratory, Los Alamos, N.M.
Sohn, H., Fugate, M. L., and Farrar, C. R. (1999). “Damage diagnosis using statistical process control.” Los Alamos National Laboratory Rep. No. LA-UR-99-6059, Los Alamos National Laboratory, Los Alamos, N.M.
Sohn, H., Fugate, M. L., and Farrar, C. R. (2000b). “Damage diagnosis using statistical process control.” Proc., 7th Int. Conf. on Recent Advances in Structural Dynamics, Southampton, U.K.
Stoumbos, Z. G., and Sullivan, J. H. (2002). “Robustness to non-normality of the multivariate EWMA control chart.” J. Quality Technol., 34(3), 260–276.
Testik, M. C., Runger, G. C., and Borror, C. M. (2003). “Robustness properties of multivariate EWMA control charts.” Qual. Reliab. Eng. Int, 19(1), 31–38.
Vanik, M. W., Beck, J. L., and Au, S. K. (2000). “Bayesian probabilistic approach to structural health monitoring.” J. Eng. Mech., 126(7), 738–745.
Wang, Z., and Ong, K. C. G. (2008). “Autoregressive coefficients based Hotelling’s control chart for structural health monitoring.” Comput. Struct., 86(19–20), 1918–1935.
Wang, Z., and Ong, K. C. G. (2009). “Structural damage detection using autoregressive-model-incorporating multivariate exponentially weighted moving average control chart.” Eng. Struct., 31(5), 1265–1275.
Wei, W. W. S. (2006). Time series analysis: Univariate and multivariate methods, 2nd Ed., Addison-Wesley, Reading, Mass.
Worden, K., Manson, G., and Fieller, N. R. J. (2000). “Damage detection using outlier analysis.” J. Sound Vib., 229(3), 647–667.
Yuen, K. -V., Au, S. K., and Beck, J. L. (2004). “Two-stage structural health monitoring approach for Phase I benchmark studies.” J. Eng. Mech., 130(1), 16–33.
Zamba, K. D., and Hawkins, D. M. (2006). “A multivariate change-point model for statistical process control.” Technometrics, 48(4), 539–549.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 5, 2007
Accepted: Sep 1, 2009
Published online: Dec 15, 2009
Published in print: Jan 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.