Linear Multiobjective Control Strategies for Wind-Excited Buildings
Publication: Journal of Engineering Mechanics
Volume 130, Issue 4
Abstract
Two multiobjective control strategies are presented and applied to the wind-excited benchmark problem. The first strategy, referred to as the energy-to-peak based controller, deals with a class of “energy-bounded” excitations, whereas the second strategy, referred to as the peak-to-peak based controller, addresses a class of peak-bounded excitations. Both control strategies are derived by minimizing the sum of weighted peak response quantities with the constraints (or penalties) on the peak values of another set of quantities such as the control resources. Both the state feedback and dynamic output feedback controllers are derived and presented. The design syntheses of these two control strategies are developed and formulated within the framework of linear matrix inequalities (LMIs), so that the LMI toolbox in MATLAB can be used effectively and conveniently. These two control strategies are applied to the wind-excited 76-story benchmark building to demonstrate their applicability and control performances. Simulation results illustrate that the proposed control strategies are viable for civil engineering structures, and their performances are excellent in comparison with that of the linear quadratic Gaussian sample controller.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abedor, J., et al. (1996). “A linear matrix inequality approach to peak-to-peak gain minimization.” Int. J. Robust Nonlinear Control, 6(9), 899–927.
Agrawal, A. K., and Yang, J. N.(1997). “Static output polynomial control for linear structures.” J. Eng. Mech., 123(6), 639–643.
Alt, T. R., Jabbari, F., and Yang, J. N.(2000). “Reliable control design for building under seismic excitation.” Earthquake Eng. Struct. Dyn., 29, 241–257.
Boyd, S., El Ghaoui, L., Feron, E., and Balakrishnan, V. (1994). Linear matrix inequalities in system and control theory, SIAM Books, Philadelphia.
Housner, G. W., et al. (1997). “Structural control: Past, present and future.” J. Eng. Mech., 123(9), 897–971.
Johnson, E. A., Voulgaris, P. G., and Bergman, L. A.(1998). “Multiobjective optimal structural control of the Notre Dame building model benchmark.” Earthquake Eng. Struct. Dyn., (27), 1165–1187.
Kim, J. H., and Jabbari, F.(2002). “Actuator saturation and control design for buildings under seismic excitation.” J. Eng. Mech., 128(4), 403–412.
Kose, I. E., Jabbari, F., Schmitendorf, W. E., and Yang, J. N.(1998). “Controllers for quadratic stability and performance of a benchmark problem.” Earthquake Eng. Struct. Dyn., 27(11), 1385–1397.
Lin, S. (2003). “Multi-objective control for civil engineering structures.” PhD dissertation, University of California, Irvine, Calif.
Ohtori, Y., Christenson, R. E., Spencer, B. F., Jr., and Dyke, S. J. (2004). “Benchmark control problems for seismically excited nonlinear buildings.” J. Eng. Mech., 130(4), 366–387.
Rotea, M. A.(1993). “The generalized control problem,” Automatica, 29(2), 373–385.
Scherer, C., and Gahinet, P.(1997). “Multi-objective output-feedback control via LMI optimization.” IEEE Trans. Autom. Control, 42(7), 896–910.
Spencer, B. F., Jr., Dyke, S. J., and Deoskar, H. S.(1998). “Benchmark problems in structural control-Part 1: Active mass driver system, and Part 2: Active tendon system.” Earthquake Eng. Struct. Dyn., 27(11), 1127–1147.
Spencer, B. F., Jr., and Sain, M. K.(1997). “Controlling buildings: A new frontier in feedback.” IEEE Control Syst. Mag., 17(6), 19–35.
Spencer, B. F., Jr., Suhardjo, J., and Sain, M. K.(1994). “Frequency domain optimal control strategies for aseismic protection.” J. Eng. Mech., 120(1), 135–158.
Whorton, M. S., Calise, A. J., and Hsu, C.-C.(1998). “A study of fixed-order mixed norm designs for a benchmark problem in structural control.” Earthquake Eng. Struct. Dyn., 27, 1315–1330.
Yang, J. N., and Agrawal, A. K.(2000). “Protective systems for high-technology facilities against microvibration and earthquake.” Int. J. Struct. Eng. Mech., 10(6), 561–575.
Yang, J. N., and Agrawal, A. K.(2002). “Semi-active hybrid control systems for nonlinear buildings against near-field earthquakes.” J. Eng. Struct., 24, 271–280.
Yang, J. N., Agrawal, A. K., and Chen, S.(1996a). “Optimal polynomial control of seismically excited non-linear and hysteric structures.” Earthquake Eng. Struct. Dyn., 25(11), 1211–1230.
Yang, J. N., Agrawal, A. K., Samali, B., and Wu, J.-C. (2004). “Benchmark problem for response control of wind-excited tall buildings.” J. Eng. Mech., 130(14), 437–446.
Yang, J. N., Kim, J. H., and Agrawal, A. K.(2000). “Resetting semiactive stiffness damper for seismic response control.” J. Struct. Eng., 126(12), 1427–1433.
Yang, J. N., Lin, S., Kim, J. H., and Agrawal, A. K.(2002). “Optimal design of passive energy dissipation systems based on and performances.” Earthquake Eng. Struct. Dyn., 31(4), 921–936.
Yang, J. N., Wu, J. C., Agrawal, A. K., and Hsu, S. Y.(1997). “Sliding mode control with compensators for wind and seismic response control.” Earthquake Eng. Struct. Dyn., 26, 1137–1156.
Yang, J. N., Wu, J. C., Reinhorn, A. M., Riley, M., Schmitendorf, W. E., and Jabbari, F.(1996b). “Experimental verifications of H-infinity and sliding mode control for seismically excited buildings.” J. Struct. Eng., 122(1), 69–75.
Zhou, K., Doyel, J. C., and Glover, K. (1996). Robust and optimal control, Prentice-Hall, Upper Saddle River, N.J.
Zhu, G., and Skelton, R. E.(1992). “A two-Riccati feasible algorithm for guaranteeing output constraints.” J. Dyn. Syst., Meas., Control, 114, 329–338.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Mar 5, 2003
Accepted: Mar 5, 2003
Published online: Mar 15, 2004
Published in print: Apr 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.