Tensile Damage in Concrete: Analysis of Experimental Technique
Publication: Journal of Engineering Mechanics
Volume 125, Issue 8
Abstract
Characterization of the tensile behavior of unreinforced and fiber-reinforced cement and concrete is delicate because of strain localization, which introduces a strong heterogeneity of the strain throughout the specimen and complicates the interpretation of test data. An experimental technique to distribute damage is analyzed in the framework of continuum damage mechanics by introducing internal variables to model the degradation mechanisms taking place in this configuration. A mechanism-based formulation is used to derive the state potential and the kinetic laws. Comparisons are performed for cement matrices with different volume fractions and orientations of short fibers. The paper shows the shortcomings of this experimental technique, though it is still possible to use it to compare the responses of plain and fiber-reinforced concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andrieux, S. (1981). “Un modèle de matériau microfissuré avec frottement.” C. R. Acad. Sci., Paris, 2(293), 329–332 (in French).
2.
Andrieux, S., Bamberger, Y., and Marigo, J.-J. (1986). “Un modèle de matériau microfissuré pour les bétons et les roches.” J. Méc. Th. Appl., Paris, 5(3), 471–513 (in French).
3.
Aveston, J., Cooper, G. A., and Kelly, A. (1971). “Single and multiple fracture.” Proc., National Phys. Lab.: Properties of Fiber Composites, IPC Science and Technology Press, Surrey, U.K., 15–26.
4.
Aveston, J., and Kelly, A. (1973). “Theory of multiple fracture of fibrous composites.” J. Mat. Sci., 8, 352–362.
5.
Bazant, Z. P. (1986). “Mechanics of distributed cracking.” Appl. Mech. Rev., 39, 675–705.
6.
Bazant, Z. P., and Pijaudier-Cabot, G. (1989). “Measurement of characteristic length of nonlocal continuum.”J. Engrg. Mech., ASCE, 115(4), 755–767.
7.
Bentur, A., and Mindess, S. (1990). Fiber reinforced cementitious composites. Elsevier, London.
8.
Boudon-Cussac, D. ( 1996). “De l'anisotropie des bétons renforcés de fibres courtes en acier,” PhD thesis, Université Paris 6, France (in French).
9.
Breysse, D., and Schmitt, N. (1991). “A test for delaying localization in tension: numerical interpretation through a probabilistic approach.” Cement and Concrete Res., 21, 963–974.
10.
Budiansky, B., Hutchinson, J. W., and Evans, A. G. (1986). “Matrix fracture in fiber-reinforced ceramics.” J. Mech. Phys. Solids, 34(2), 167–189.
11.
Burr, A., Hild, F., and Leckie, F. A. (1995). “Micro-mechanics and continuum damage mechanics.” Arch. Appl. Mech., 65(7), 437–456.
12.
Burr, A., Hild, F., and Leckie, F. A. (1997). “Continuum description of damage in ceramic-matrix composites.” Eur. J. Mech. A/Solids, 16(1), 53–78.
13.
Chaboche, J.-L. (1982). “Le concept de contrainte effective appliquée à l'élasticité et à la viscoplasticité en présence d'un endommagement anisotrope.” Colloque International du CNRS, France, 295, 31–43 (in French).
14.
Cox, H. L. (1952). “The elasticity and the strength of paper and other fibrous materials.” Brit. J. Appl. Physics, London, 3, 72–79.
15.
Curtin, W. A. (1993). “Multiple matrix cracking in brittle matrix composites.” Acta Metall. Mat., 41(5), 1369–1377.
16.
Domergue, J.-M. ( 1995). “Relationships between the macroscopic behavior of ceramic matrix composites and their constituents properties,” PhD thesis, University of California, Santa Barbara, Calif.
17.
Eshelby, J. D. (1957). “The determination of the elastic field of an ellipsoidal inclusion and related problems.” Proc., Roy. Soc., London, A241, 376–396.
18.
Germain, P., Nguyen, Q. S., and Suquet, P. (1983). “Continuum thermodynamics.” J. Appl. Mech., 50, 1010–1020.
19.
Guinea, G. V., Planas, J., and Elices, M. (1994). “Correlation between the softening and the size effect curves.” Proc., Size Effect in Concrete Struct., E&FN Spon, London, 233–244.
20.
Hild, F., Burr, A., and Leckie, F. A. (1996). “Matrix cracking and debonding in ceramic-matrix composites.” Int. J. Solids and Struct., 33(8), 1209–1220.
21.
Hutchinson, J. W., and Jensen, H. M. (1990). “Models for fiber debonding and fiber pull-out in brittle composites with friction.” Mech. Mat., 9, 139–163.
22.
Lemaitre, J. (1992). A course on damage mechanics. Springer-Verlag, Berlin.
23.
Lemaitre, J., and Dufailly, J. (1977). “Modélisation et identification de l'endommagement plastique des métaux.” Proc., 3e Congrès Français de Mécanique, Grenoble, France.
24.
L'Hermite, S. (1960). “Volume changes in concrete.” Proc., 4th Int. Symp. on the Chemistry of Cement, Washington, D.C., 659–702.
25.
Love, A. E. H. (1927). The mathematical theory of elasticity. Cambridge University Press, Cambridge, U.K.
26.
Mazars, J., and Berthaud, Y. (1989). “Une technique expérimentale appliquée au béton pour créer un endommagement diffus et mettre en évidence son caractère unilatéral.” C. R. Acad. Sci., Paris, 2(308), 579–584 (in French).
27.
Mazars, J., Berthaud, Y., and Ramtani, S. (1990). “The unilateral behavior of damaged concrete.” Engrg. Fracture Mech., 35(4/5), 629–635.
28.
McMeeking, R. M., and Evans, A. G. (1990). “Matrix fatigue cracking in fiber composites.” Mech. Mat., 9, 217–227.
29.
Outwater, J. O., and Murphy, M. C. (1969). “On the fracture energy of unidirectional laminates.” Proc., 26th Annu. Tech. Conf. of Reinforced Polymer/Composites Div. of Plastic Industry, The Society of Plastics Industry, New York, 1–8.
30.
Rice, J. R. (1971). “Inelastic constitutive relations for solids: an internal variable theory and its application to metal plasticity.” J. Mech. Phys. Solids, 19, 433–455.
31.
Sun, Z. ( 1989). “Une théorie tridimensionnelle des poutres élastiques hétérogènes et analyse non-linéaire des structures en béton armé,” PhD thesis, Université Paris 6, France (in French).
32.
Volterra, V. (1907). “Sur l'équilibre des corps élastiques multiplement connexes.” Annales Scientifiques de l'École Normale Supérieure, Paris, 24(3), 401–518 (in French).
Information & Authors
Information
Published In
History
Received: Nov 14, 1997
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.