Load-Bearing Capacity of Tempered Structural Glass
Publication: Journal of Engineering Mechanics
Volume 125, Issue 8
Abstract
This paper presents a method for the failure analysis of structural glass components of buildings. Structural glass is generally prestressed by tempering. In the method, residual stresses are first computed by simulation of this tempering process of soda-lime-silica glass plates using the finite-element method. The model includes both stress and structural relaxations. The edge effects of tempering are modeled. Then, the failure strength of annealed glass is obtained by a statistical analysis of tests performed on small specimens. Loading rate effects are also taken into account. Computational results are associated with the statistical approach for the failure prediction of large annealed and tempered glass plates. This prediction method is validated by experimental results from four-point bending tests up to failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aben, H., and Guillemet, C. (1993). Photoelasticity of glass. Springer, Berlin.
2.
Burke, M. A., Soules, T. F., Busbey, R. F., and Kheson, S. M. (1987). “Finite-element calculation of stresses in glass parts undergoing viscous relaxation.” J. Am. Ceramic Soc., 70(2), 90–95.
3.
Carré, H. ( 1996). “Etude d'un matériau fragile précontraint: le verre trempé,” PhD thesis, Ecole Nationale des Ponts et Chaussées, Champs-sur-Marne, France (in French).
4.
Carré, H., and Daudeville, L. (1996). “Numerical simulation of soda-lime silicate glass tempering.” J. de Physique IV, Colloque C1, 6, 175–185.
5.
Duffrene, L. ( 1994). “Comportement viscoélastique d'un verre silico-sodocalcique dans le domaine des températures intermédiaires,” PhD thesis, Ecole Nationale Supérieure des Mines de Paris, Paris (in French).
6.
Evans, A. G. (1974). “Slow crack growth in brittle materials under dynamic loading conditions.” Int. J. Fracture, 10(2), 251–259.
7.
Gardon, R. ( 1980). “Thermal tempering of glass.” Glass: Science and technology, D. R. Uhlmann and N. J. Kreid, eds., Academic, New York.
8.
Grenet, L. (1899). “Mechanical strength of glass.” Bull. Soc. Enc. Nat., Paris, 5(4), 838–848.
9.
Griffith, A. (1920). “The phenomena of rupture and flow in solids.” Philosophical Trans. Royal Soc., London, A221, 163–198.
10.
Guillemet, C., Gy, R., Labrot, M., Sipp, A., and Neuville, P. (1992). “Viscosity, configurational entropy and structural relaxation of soda-lime-silica glass.” Proc., 16th Int. Congr. of Glass.
11.
Gy, R., Duffrene, L., and Labrot, M. (1994). “New insights into the viscoelasticity of glass.” J. Non-Cryst. Solids, 175, 103–117.
12.
Helfinstine, J. D. (1980). “Adding static and dynamic fatigue effects directly to the Weibull distribution.” J. Am. Ceramic Soc., 63(1–2), 113–125.
13.
Lawn, B. R., and Marshall, D. B. (1977). “Contact fracture resistance of physically and chemically tempered glass plates: a theoretical model.” Phys. and Chem. of Glasses, 18(1), 7–18.
14.
Michalske, T. A., and Frieman, S. W. (1983). “A molecular mechanism for stress corrosion in vitreous silica.' J. Am. Ceramic Soc., 66(4), 284–288.
15.
Narayanaswamy, O. S. (1971). “A model of structural relaxation in glass.” J. Am. Ceramic Soc., 54(10), 491–498.
16.
Narayanaswamy, O. S. (1978). “Stress and structural relaxation in tempering glass.” J. Am. Ceramic Soc., 61(3), 146–152.
17.
Narayanaswamy, O. S., and Gardon, R. (1969). “Calculation of residual stresses in glass.” J. Am. Ceramic Soc., 52(10), 554–558.
18.
Redner, A. S. (1995). “Back to basics: Nondestructive evaluation using polarized light.” Mat. Evaluation, 53(6), 642.
19.
Rooke, D. P., and Cartwright, D. J. (1976). Compendium of stress intensity factors. Hillington Press, Uxbridge Middlesex, England.
20.
Schwarzl, F., and Staverman, A. J. (1952). “Time-temperature dependence of linear viscoelastic behavior.” J. Appl. Phys., 23(8), 838–843.
21.
Sinha, N. K. (1978). “Stress state in tempered glass plate and determination of heat-transfer rate.” Experimental Mech., 18(1), 25–34.
22.
Tool, A. Q. (1946). “Relation between inelastic deformability and thermal expansion of glass in its annealing range.” J. Am. Ceramic Soc., 29(9), 240–253.
23.
Weibull, W. A. (1951). “A statistical distribution function of wide applicability.” J. Appl. Mech., 18, 293–297.
24.
Wiederhorn, S. M. (1967). “Influence of water vapor on crack propagation in soda-lime silicate glass.” J. Am. Ceramic Soc., 50(8), 407–417.
Information & Authors
Information
Published In
History
Received: Nov 25, 1997
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.