Relations between Fracture Tensor Parameters and Jointed Rock Hydraulics
Publication: Journal of Engineering Mechanics
Volume 125, Issue 1
Abstract
The fracture tensor is a combined measure of joint geometry parameters. The possible relations between the properties of the fracture tensor and the hydraulic properties of jointed rock including the equivalent continuum behavior are investigated in this paper through numerical experiments performed at the two-dimensional level incorporating joint networks with two joint sets. The possibility of a nonzero average block permeability and the equivalent continuum behavior of a joint system can be expressed with the help of the first invariant of fracture tensor (F0). A threshold value of F0 (to achieve nonzero block permeability) between 3 and 6 and a cutoff value of F0 (to achieve equivalent continuum behavior) between 10 and 30 were obtained for the joint geometry configurations studied in the investigation. Both the threshold value and the cutoff value of F0 were found to depend on the relative orientation of joint sets. Joint systems with low relative orientation angles (for systems with only two joint sets) and low densities do not show hydraulically equivalent continuum behavior. A nonlinear relation seems to exist between the directional permeability and the fracture tensor component for the connected joint configuration when rock blocks contain only minor discontinuities. For rock blocks containing major discontinuities, this relation becomes linear.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Kulatilake, P. H. S. W., Chen, J., Teng, J., Shufang, X., and Pang, G. ( 1996). “Discontinuity characterization for the rock mass around a tunnel close to the permanent shiplock area of the Three Gorges Dam site in China.” Int. J. Rock Mech. and Min. Sci., 33, 255–277.
2.
Kulatilake, P. H. S. W., He, W., Um, J., and Wang, H. ( 1997). “A physical model study of jointed rock mass strength under uniaxial compressive loading.” Int. J. Rock. Mech. and Min. Sci., 34(3/4), 692–693 (full paper in CD ROM).
3.
Kulatilake, P. H. S. W., Ucpirti, H., and Stephansson, O. ( 1994). “Effect of finite size joints on the deformability of jointed rock at the two dimensional level.” Can. Geotech. J., Ottawa, 31, 364–374.
4.
Kulatilake, P. H. S. W., Wang, S., and Stephansson, O. ( 1993). “Effect of finite size joints on deformability of jointed rock at the three dimensional level.” Int. J. Rock Mech. and Min. Sci., 30(5), 479–501.
5.
Kulatilake, P. H. S. W., Wathugala, D. N., Poulton, M., and Stephansson, O. ( 1990). “Analysis of structural homogeneity of rock masses.” Int. J. Engrg. Geol., 29, 195–211.
6.
Oda, M. ( 1982). “Fabric tensor for discontinuous geologic materials.” Soils and Found., Tokyo, 22(4), 96–108.
7.
Oda, M. ( 1985). “Permeability tensor for discontinuous rock masses.” Géotechnique, London, 35(4), 483–495.
8.
Panda, B. B. ( 1995). “Investigation of relations between the geometrical properties and hydraulic properties of jointed rock through numerical simulation,” PhD dissertation, University of Arizona, Tucson, Ariz.
9.
Panda, B. B., and Kulatilake, P. H. S. W. (1999). “Effect of joint geometry and transmissivity on jointed rock hydraulics.”J. Engrg. Mech., ASCE, 125(1), 41–50.
Information & Authors
Information
Published In
History
Received: Apr 28, 1997
Published online: Jan 1, 1999
Published in print: Jan 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.