Effect of Joint Geometry and Transmissivity on Jointed Rock Hydraulics
Publication: Journal of Engineering Mechanics
Volume 125, Issue 1
Abstract
The effect of joint geometry parameters (joint orientation, joint density, and joint size) and joint transmissivity on the hydraulic properties of jointed rock blocks was examined in two dimensions using joint networks with two joint sets through numerical experiments. The chance for equivalent continuum hydraulic behavior and the average block permeability of jointed rock were found to be very sensitive to the relative orientation of the joint sets in a joint network system. Although both the equivalent continuum behavior and the average block permeability seem to be little affected by the change of the standard deviation of the joint orientation distribution, the degree of permeability anisotropy seems to depend on the standard deviation of the joint orientation especially for anisotropic joint systems. Chance for the equivalent continuum behavior and the average block permeability were found to increase with the increase of joint density and joint size. The chance for equivalent continuum behavior and the permeability anisotropy were found to depend on the distribution of joint hydraulic conductivity. The influence of the joint hydraulic conductivity is more prominent for joint systems with high joint density and large joint sizes. The greater the variation of the hydraulic conductivity value among the joints in a joint set, the lesser the chance for the medium to behave like an equivalent continuum porous medium.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andersson, J., and Dverstorp, B. ( 1987). “Conditional simulations of fluid flow in three dimensional networks of discrete fractures.” Water Resour. Res., 23(10), 1876–1886.
2.
Bear, J. ( 1972). Dynamics of fluids in porous media. Elsevier Science, New York.
3.
Cacus, M. C., et al. ( 1990). “Modeling of fracture flow with a stochastic discrete fracture network: Calibration and validation—1. The flow model.” Water Resour. Res., 26(3), 479–489.
4.
Hseih, P. A., and Neuman, S. P. ( 1985). “Field determination of the three dimensional hydraulic conductivity tensor of anisotropic media, 1. Theory.” Water Resour. Res., 21(11), 1655–1665.
5.
Hsieh, P. A., Neuman, S. P., Stiles, G. K., and Simpson, E. S. ( 1985). “Field determination of the three dimensional hydraulic conductivity tensor of anisotropic media, 2. Methodology and application to fractured rocks.” Water Resour. Res., 21(11), 1666–1676.
6.
Kanatani, K. ( 1984). “Distribution of directional data and fabric tensors.” Int. J. Engrg. Sci., 22(2), 149–164.
7.
Kulatilake, P. H. S. W., Chen, J., Teng, J., Shufang, X., and Pan, G. ( 1996). “Discontinuity characterization for the rock mass around a tunnel close to the permanent shiplock area of the Three Gorges Dam site in China.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 33, 255–277.
8.
Kulatilake, P. H. S. W., Fiedler, R., and Panda, B. B. ( 1997). “Box fractal dimension as a measure of statistical homogeneity of jointed rock masses.” Int. J. Engrg. Geol., 48(3–4), 217–229.
9.
Kulatilake, P. H. S. W., Wathugala, D. N., Poulton, M., and Stephansson, O. ( 1990). “Analysis of structural homogeneity of rock masses.” Int. J. Engrg. Geol., 29, 195–211.
10.
Kulatilake, P. H. S. W., Wathugala, D. N., and Stephansson, O. ( 1993). “Joint network modeling with a validation exercise in Stripa Mine, Sweden.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 30, 503–526.
11.
Long, J. C. S., Remer, J. S., Wilson, C. R., and Witherspoon, P. A. ( 1982). “Porous media equivalents for networks of discontinuous fractures.” Water Resour. Res., 18(3), 645–658.
12.
Long, J. C. S., and Witherspoon, P. A. ( 1985). “The relationship of the degree of interconnection to permeability in fracture networks.” J. Geophys. Res., 90(B4), 3087–3097.
13.
Marsily, G. de. ( 1985). “Flow and transport in fractured rocks: Connectivity and scale effect.” Proc. Int. Assoc. of Hydrogeologists, Hydrogeology of Rocks of Low Permeability, Memoirs, International Association of Hydrogeologists, Tucson, Ariz., XVII, 267–277.
14.
Oda, M. ( 1985). “Permeability tensor for discontinuous rock masses.” Géotechnique, 35(4), 483–495.
15.
Panda, B. B., and Kulatilake, P. H. S. W. (1999). “Relations between fracture tensor parameters and jointed rock hydraulics.”J. Engrg. Mech., ASCE, 125(1), 51–59.
16.
Raven, K. G., Novakowski, K. S., and Lapcevic, P. A. ( 1988). “Interpretation of field tracer tests on a single fracture using a transient solute storage model.” Water Resour. Res., 24(12), 2019–2032.
17.
Robinson, P. C. ( 1984). “Connectivity, flow and transport in network models of fractured media,” PhD thesis, Oxford University, Oxford, U.K.
18.
Rouleau, A., and Gale, J. E. ( 1987). “Stochastic discrete fracture simulation of ground water flow into an underground excavation in granite.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 24(2), 99–112.
19.
Schwartz, F. W., Smith, W. L., and Crowe, A. S. ( 1983). “A stochastic analysis of microscopic dispersion in fractured media.” Water Resour. Res., 19(5), 1253–1265.
20.
Segan, S., and Karasaki, K. ( 1993). TRINET: A flow and transport code for fracture networks—user's manual and tutorial. LBL-34834. Lawrence Berkeley Laboratory, Berkeley, Calif.
21.
Silliman, S. E. ( 1989). “An interpretation of the difference between aperture estimates derived from hydraulic and tracer tests in a single fracture.” Water Resour. Res., 25(10), 2275–2283.
22.
Snow, D. T. ( 1970). “The frequency and aperture of fractures in rock.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 7, 23–40.
23.
Tsang, Y. W., and Tsang, C. F. ( 1987). “Channel model of flow through fractured media.” Water Resour. Res., 23(3), 467–480.
Information & Authors
Information
Published In
History
Received: Apr 28, 1997
Published online: Jan 1, 1999
Published in print: Jan 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.