Shear‐Lag Analysis of Planar Soil Reinforcement in Plane‐Strain Compression
Publication: Journal of Engineering Mechanics
Volume 119, Issue 2
Abstract
This paper describes an approximate analytical method for estimating the stresses in planar tensile reinforcements due to shearing of the surrounding soil mass. The proposed formulation adapts the techniques of shear‐lag analysis, commonly used in the mechanics of composites, and considers plane‐strain compression shearing of the soil mass with the inclusion oriented parallel to the minor, external, principal stress. The analyses assume that the soil and reinforcement behave as linear, isotropic, and elastic materials, linked through a frictional interface. Closed‐form solutions are presented for the axial reinforcement stress and interface tractions as functions of the material properties and inclusion geometry. Comparisons with numerical finite‐element calculations demonstrate the accuracy of the analytical solutions for a wide range of practical geometric and material properties. The proposed formulation provides a simple and direct method for estimating the stress distribution within reinforced soil masses at working load conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, T. M. (1991). “Determination of long‐term tensile strength of geosynthetics: A state‐of‐the‐art review.” Proc., Geosynthetics '91, Industrial Fabrics Assn. Int. (IFAI), Atlanta, Ga., 1, 351–381.
2.
Amirbayat, J., and Hearle, W. S. (1969). “Properties of unit composites as determined by the properties of the interface. Part I: Mechanism of matrix‐fibre load transfer.” Fibre Sci. and Tech., 2, 123–141.
3.
Aveston, J., and Kelly, A. (1973). “Theory of multiple fracture of fibrous composites.” J. Mat. Sci., 8, 352–362.
4.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, London, England 36(1), 65–79.
5.
Budiansky, B., Hutchinson, J. W., and Evans, A. G. (1986). “Matrix fracture in fiber‐reinforced ceramics.” J. Mech. of Phys. Solids, 34(2), 167–189.
6.
Cox, H. L. (1952). “The elasticity and strength of paper and other fibrous materials.” British Journal of Applied Physics, London, England 3, 72–79.
7.
De Buhan, P., Mangiavacchi, R., Nova, R., Pellegrini, G., and Salençon, J. (1989). “Yield design of reinforced earth walls by a homogenization method.” Géotechnique, 39(2), 189–203.
8.
Harrison, W. J., and Gerrard, C. M. (1972). “Elastic theory applied to reinforced earth.” J. Soil Mech. and Found. Engrg. Div., ASCE, 98(12), 1325–1344.
9.
Jarrett, P. M., and McGown, A., eds. (1987). “The application of polymeric reinforcement in soil retaining structures.” NATO ASI Series E: Applied Sciences, 147, Kluwer Academic Publishers, Boston, Mass.
10.
Jewell, R. A. (1990). “Strength and deformation in reinforced soil design.” Proc., 4th Int. Conf. on Geotextiles, Geomembranes and Related Products, The Hague, The Netherlands.
11.
Jones, C. J. F. P. (1988). Earth reinforcement and soil structures. Butterworths, London, England.
12.
Juran, I., Guermazi, A., Chen, C. L., and Idler, M. H. (1988). “Modelling and simulation of load transfer in reinforced soils: Part 1.” Int. J. Numer. Analytical Methods in Geomech., 12, 141–158.
13.
Kuhn, P. (1956). Stresses in aircraft and shell structures. McGraw‐Hill, New York, N.Y.
14.
Ladd, C. C., Foott, R., Ishihara, K., Schlosser, F., and Poulos, H. G. (1977). “Stress‐deformation and strength characteristics.” Proc., 9th Intl. Conf. on Soil Mech. and Found. Engrg., Tokyo, 2, 421–494.
15.
Larson, D. G. (1992). PhD thesis, Massachusetts Institute of Technology, Cambridge, Mass.
16.
Leschinsky, D., and Boedeker, R. H. (1989). “Geosynthetic reinforced soil structures.” J. Geotech. Engrg., ASCE, 115(10), 1459–1478.
17.
Piggott, M. R. (1980). Load‐bearing fibers composites. Pergamon Press, Oxford, England.
18.
Potyondy, J. G. (1961). “Skin friction between cohesive granular soils and construction materials.” Géotechnique, 11(4), 339–353.
19.
Romstad, K. M., Herrmann, L. R., and Shen, C. K. (1976). “Integrated study of reinforced earth‐I: Theoretical formulation.” J. Geotech. Engrg. Div., ASCE, 102(5), 457–471.
20.
Tyson, W. R., and Davies, G. J. (1965). “A photoelastic study of the shear stresses associated with the transfer of stress during fibre reinforcement.” British Journal of Applied Physics, London, England 16, 199–205.
21.
Uesugi, M., and Kishida, H. (1986). “Influential factors of friction between steel and dry sands.” Soils and Found., 26(2), 33–46.
22.
Whittle, A. J., Larson, D. G., Abramento, M., and Germaine, J. T. (1991). “Geosynthetic reinforcement of soil masses.” Annual Technical Report, U.S. Army Research Office, Massachusetts Institute of Technology, Cambridge, Mass.
23.
Whittle, A. J., Germaine, J. T., Larson, D. G., and Abramento, M. (1992). “Measurement and interpretation of reinforcement stresses in the APSR cell.” Proc., Int. Symp. on Earth Reinforcement Pract., Fukuoka, Japan.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 17, 1992
Published online: Feb 1, 1993
Published in print: Feb 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.