Numerical Simulation of Batch Settling Process
Publication: Journal of Environmental Engineering
Volume 125, Issue 11
Abstract
The batch settling process was simulated numerically using a dynamic model for zone settling and compression. The simulation can provide the height variation of the supernatant-suspension interface with time as well as the vertical solids profile at different times. The simulation results were compared with experimental batch settling data in the literature for various types of suspended materials with different initial suspended solids concentrations. Generally good agreement between the simulations and experimental measurements was obtained. The method presented here has several advantages for the simulation of the batch settling process compared with the methods found in the literature; it is simple, requires only four parameters, and provides good results for both zone and compression settling. Also presented is a technique for quantifying all four required parameters, in particular, the two describing the compression characteristics of a suspension from batch settling tests. These compression parameters are needed to estimate the depth requirement of steady-state gravity thickeners. This method also will be useful for environmental engineering processes that use batch settling for solids-liquid separation, such as sequencing batch reactors.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Been, K., and Sills, G. C. (1981). “Self-weight consolidation of soft soils: An experimental and theoretical study.” Geotech., 31(4), 519–535.
2.
Bhargava, D. S., and Rajagopal, K. (1990). “Modelling in zone settling for different types of suspended materials.” Water Res., 24(6), 675–683.
3.
Bustos, M. C., and Concha, F. (1988). “Simulation of batch sedimentation with compression.” AIChE J., 34(5), 859–861.
4.
Cho, S. H., Colin, F., Sardin, M., and Prost, C. (1993). “Settling velocity model of activated sludge.” Water Res., 27(7), 1237–1242.
5.
Diplas, P., and Papanicolaou, A. (1997). “Batch analysis of slurries in zone settling regime.”J. Envir. Engrg., ASCE, 123(7), 659–667.
6.
Dixon, D. C. (1978). “Momentum-balance aspects of free-settling theory, III: Transient compression resistance.” Separation Sci. Technol., 13(9), 753–766.
7.
Fitch, B. (1979). “Sedimentation of flocculent suspensions: State of the art.” AIChE J., 25(6), 913–930.
8.
Fitch, B. (1983). “Kynch theory and compression zones.” AIChE J., 29(6), 940–947.
9.
Fitch, B. (1993). “Thickening theories—An analysis.” AIChE J., 39(1), 27–36.
10.
Font, R. (1988). “Compression zone effect in batch sedimentation.” AIChE J., 34(2), 229–238.
11.
George, D. B., and Keinath, T. M. (1978). “Dynamics of continuous thickening.” J Water Pollution Control Fed., 50(11), 2560–2572.
12.
Islam, M. A., and Karamisheva, R. D. (1998). “Initial settling rate/concentration relationship in zone settling.”J. Envir. Engrg., ASCE, 124(1), 39–42.
13.
Kos, P. (1977). “Fundamentals of gravity thickening.” AIChE J., 23(11), 99–105.
14.
Kynch, G. J. (1952). “Theory of sedimentation.” Trans. Faraday Soc., 48, 166–176.
15.
Michaels, A. S., and Bolger, J. C. (1962). “Settling rates and sediment volumes of flocculated kaolin suspensions.” I & E. C. Fundamentals, 1(1), 24–33.
16.
Richardson, J. F., and Zaki, W. N. (1954). “Sedimentation of fluidization: Part 1.” Trans. Inst. Chem. Engr., 32, 35–53.
17.
Scott, K. J. (1968). “Theory of thickening: factors affecting settling rate of solids in flocculated pulps.” Trans. Inst. Min. Metal., 77, C85–C97.
18.
Takács, I., Patry, G. G., and Nolasco, D. (1991). “A dynamic model of the clarification-thickening process.” Water Res., 25(10), 1263–1271.
19.
Tiller, F. M. (1981). “Revision of Kynch sedimentation theory.” AIChE J., 27(5), 823–829.
20.
Tiller, F. M., and Khatib, Z. (1984). “The theory of sediment volumes of compressible, particulate structures.” J. Colloid and Interface Sci., 100(1), 55–67.
21.
Vesilind, A. P. (1968). “Discussion of `Evaluation of activated sludge thickening theories,' by R. I. Dick and B. B. Ewing.”J. Sanit. Engrg. Div., ASCE, 94, 185–191.
22.
Zheng, Y., and Bagley, D. M. (1998). “Dynamic model for zone settling and compression in gravity thickeners.”J. Envir. Engrg., ASCE, 124(10), 953–958.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 125 • Issue 11 • November 1999
Pages: 1007 - 1013
History
Received: Dec 4, 1998
Published online: Nov 1, 1999
Published in print: Nov 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.