Strategic Positioning of Inventory to Match Demand in a Capital Projects Supply Chain
Publication: Journal of Construction Engineering and Management
Volume 130, Issue 6
Abstract
Industrial buyers of capital facilities have experienced and continue to experience pressure to reduce facility design and construction lead time. This pressure arises both internally (due to successes in manufacturing lead time reductions) and externally (due to competitive forces including narrowing product delivery windows). This paper presents a case study detailing one owner’s efforts to reduce the length and variability of delivery time for long-lead construction materials in order to improve overall project lead time. The owner adopted a long-term multiproject perspective, procuring material in advance of specific projects and holding it at a position in the supply chain selected to allow flexibility for customization. Reduction in lead time of 75% from order to delivery of the material resulted for individual projects within the owner’s capital plan. As a result, the material was available at the construction site well in advance of its need for erection. To study if holding material at alternative locations in the supply chain could provide a better match between delivery quantities and the demand for erection, the supply chain was simulated. In this case study, demand information was imprecise, allowing only the quantity of material delivered to be considered rather than matching specific items to specific locations. Nonetheless, the results demonstrate the utility of simulation in the capital projects supply chain and the value of improving demand forecasts.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AbouRizk, S.M., Ruwanpura, J.Y., Er, K.C., and Fernando, S. ( 1999). “Special purpose simulation template for utility tunnel construction.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 948–955.
2.
Angerhofer, B.J., and Angelides, M.C. ( 2000). “System dynamics modeling in supply chain management: Research review.” Proc., 2000 Winter Simulation Conf., IEEE, Orlando, Fla., 342–351.
3.
Arbulu, R.J., Tommelein, I.D., Walsh, K.D., and Hershauer, J.C. ( 2002). “Contributors to lead time in construction supply chains: Case of pipe supports used in power plants.” Proc., 2002 Winter Simulation Conference, IEEE, San Diego, 1745–1751.
4.
Archibald, G., Karabakal, N., and Karlsson, P. ( 1999). “Supply chain versus supply chain: Using simulation to compete beyond the four walls.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 1207–1214.
5.
Barnett, M.W., and Miller, C.J. ( 2000). “Analysis of the virtual enterprise using distributed supply chain modeling and simulation: An application of e-SCOR.” Proc., 2000 Winter Simulation Conf., IEEE, Orlando, Fla., 352–361.
6.
Bashford, H. H., Sahwney, A., Walsh, K. D., and Kot, K. (2003). “Implications of even flow production methodology for U.S. housing industry.” J. Constr. Eng. Manage., 129(3), 330–337.
7.
Bhaskaran, S. (1998). “Simulation analysis of a manufacturing supply chain.” Decision Sci., 29(3), 633–657.
8.
Cox, A. (1999). “Power, value, and supply chain management.” Supply Chain Manage. J., 4(4), 167–175.
9.
Cox, A., and Ireland, P. (2002). “Managing construction supply chains: The common sense approach.” Eng., Constr., Archit. Manage., 9(5/6), 409–418.
11.
Crutcher, C.A., Walsh, K.D., Hershauer, J.C., and Tommelein, I.D. ( 2001). “Effects of a preferred vendor relationship on an electrical component supplier and an electrical contractor: A case study.” Proc. Ninth Annual Conf. Intl. Group for Lean Construction (IGLC-9), IGLC, Singapore.
12.
Damelio, R. ( 1996). The basics of process mapping, Productivity Press, N.Y.
13.
Forrester, J. W. (1958). “Industrial dynamics: A major breakthrough for decision makers.” Harvard Bus. Rev., 36(4), 37–66.
14.
Forrester, J.W. ( 1961). Industrial dynamics, Productivity Press, Portland, Ore.
15.
Francis, R.L., McGinnis L.F., Jr., and White, J.A. ( 1992) Facility layout and location: An analytical approach. 2nd Ed., Prentice–Hall, Englewood Cliffs, N.J.
16.
Hajjar, D., and AbouRizk, S.M. ( 1999). “SIMPHONY: An environment for building special purpose construction simulation Tools.” Proc., 1999 Winter Simulation Conf., IEEE, Piscataway, N.J., 998–1006.
17.
Halpin, D.W., and Martinez, L. ( 1999). “Real world applications of construction process simulation.” Proc., 1999 Winter Simulation Conf., IEEE, Piscataway, N.J., 956–962.
19.
Howell, G.A., and Ballard, H.G. ( 1996). “Managing uncertainty in the piping process.” Research Rep. No. 47-13, Construction Industry Institute, Austin.
18.
Howell, G., Laufer, A., and Ballard, G. (1993). “Interaction between subcycles: One key to improved methods.” J. Constr. Eng. Manage., 119(4), 714–728.
20.
Ingalls, R.G., and Kasales, C. ( 1999). “CSCAT: The COMPAQ Supply Chain Analysis Tool.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 1201–1206.
21.
Ioannou, P.G. ( 1999). “Construction of a dam embankment with nonstationary queues.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 921–928.
22.
King, R.E., and Moon, K. ( 1999). “Quick response replenishment: A case study.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 1341–1349.
23.
Law, A.M., and McComas, M.G. ( 1999). “Simulation of manufacturing systems.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 56–59.
24.
Mallya, S., Banerjee, S., and Bistline, W. G. (2001). “A decision support system for production/distribution planning in continuous manufacturing.” Decision Sci., 32(3), 545–556.
25.
Martinez, J.C. ( 1996). “STROBOSCOPE state and resource based simulation of construction processes.” PhD dissertation, Civil and Environmental Engineering, Univ. of Michigan, Ann Arbor, Mich., available at 〈http://www.strobos.ce.vt.edu/〉
26.
Parsons, D.J., and Siprelle, A.J. ( 2000). “A supply chain case study of a food manufacturing merger.” Proc., 2000 Winter Simulation Conf., IEEE, Orlando, Fla., 1090–1094.
27.
Price, R.N., and Harrell, C.R. ( 1999). “Simulation modeling and optimization using ProModel.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 208–214.
28.
Raghhunathan, S. (1999). “Interorganizational collaborative forecasting and replenishment systems and supply chain implications.” Decision Sci., 30(4), 1053–1071.
29.
Sawhney, A., Mund, A., and Marble, J. ( 1999). “Simulation of the structural steel erection process.” Proc., 1999 Winter Simulation Conf., IEEE, Phoenix, 942–947.
30.
Schunk, D., and Plott, B. ( 2000). “Using simulation to analyze supply chains.” Proc., 2000 Winter Simulation Conf., IEEE, Orlando, Fla., 1095–1100.
31.
Swaminathan, J. M., Smith, S. F., and Sadeh, N. M. (1998). “Modeling supply chain dynamics: A multiagent approach.” Decision Sci., 29(3), 607–632.
32.
Tommelein, I.D. ( 1997). “Discrete-event simulation of lean construction processes.” Proc., 5th Conf., Intl. Group of Lean Construction. 〈http://web.bham.ac.uk/d.j.crook/lean/iglc5/iris/iris.htm〉 (July 13, 2002), IGLC, Gold Coast, Australia, 121–135.
33.
Tommelein, I. D. (1998). “Pull-driven scheduling for pipe-spool installation: Simulation of a lean construction technique.” J. Constr. Eng. Manage., 124(4), 279–288.
34.
Tommelein, I. D., Riley, D., and Howell, G. A. (1999). “Parade game: Impact of work flow variability on trade performance.” J. Constr. Eng. Manage., 125(5), 304–310.
35.
Tommelein, I.D., Walsh, K.D., and Hershauer, J.C. ( 2003), “Capital projects supply chain management.” Research Rep. No. 172-11, Construction Industry Institute, Austin.
36.
Trone, J., Guerin, A., and Clay, A.D. ( 2000). “Simulation of waste processing, transportation, and disposal operations.” Proc., 2000 Winter Simulation Conf., IEEE, Orlando, Fla., 1085–1089.
37.
Tsao, C.C. Y., and Tommelein, I.D. ( 2001). “Integrated product-process development by a light fixture manufacturer.” Proc., 9th Annual Conf., Int. Group for Lean Construction (IGLC-9), IGLC, Singapore.
38.
Vorster, M.C., Magrogan, S.A., and McNeil, B.W. ( 1998). “PEpC: A breakthrough project delivery system that improves performance by reforming owner, contractor, supplier relationships.” Research Rep. No. 130-1, Construction Industry Institute, Austin.
39.
Vrijhoef, R., and Koskela, L. (2000). “Roles of supply chain management in construction.” European J. Purchasing Supply Chain Manage., 6, 169–178.
40.
Walsh, K.D., Hershauer, J.C., Walsh, T.A., Tommelein, I.D., and Sawhney, A. ( 2002). “Lead time reduction via prepositioning of inventory in an industrial construction supply chain.” Proc., 2002 Winter Simulation Conf., IEEE, San Diego, 1737–1744.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 130 • Issue 6 • December 2004
Pages: 818 - 826
Copyright
Copyright © 2004 ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.