Laboratory-Based Productivity Study on Alternative Masonry Systems
Publication: Journal of Construction Engineering and Management
Volume 129, Issue 3
Abstract
Masonry construction over the last century has undergone radical changes that have led to specific improvements in construction performance due to the advent of large-sized blocks, innovative methods like surface-bonded masonry, partially grouted masonry, and dry-stacked/mortarless masonry using interlocking blocks. This paper outlines relative productivity assessment of conventional and interlocking-block masonry with different construction methods. To measure the utilization of time by the members of the team, work sampling (adopting the 5 min rating technique) was used. The frequencies of occurrences of each work category, namely direct, indirect, and noncontributory, have been established. Due to the variation in the noncontributory work component for different methods of construction, the net output has been expressed as output per productive hour. Productivity enhancement of 80–120% was observed for dry-stacked masonry and 60–90% more for thin-jointed and mortar-bedded interlocking-block masonry than that of conventional masonry.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aadamus, L., and Spevak, V. (1986). “Dry stone walling technology-manufacturing and using building blocks without mortar.” Proc., 10th Triennial Congress of Int. Council for Building Research, Studies and Documentation, Washington, D.C., 2709–2716.
Anand, K. B., and Ramamurthy, K.(2000). “Development and performance evaluation of interlocking-block masonry.” J. Archit. Eng., 6(2), 45–51.
Anand, K. B. (2001). “Development and performance evaluation of interlocking block masonry.” PhD thesis, Indian Institute of Technology Madras, Chennai, India.
Dhanasekar, M. (1993). “Productivity of brick masonry crew in developing countries.” Proc., 6th North American Masonry Conf., The Masonry Society, Boulder, Colo., 791–802.
Grimm, C. T.(1974). “Masonry construction operations.” J. Constr. Div., Am. Soc. Civ. Eng., 100(2), 171–185.
Grimm, C. T., and Fowler, D. W. (1985). “Effect of brick suction on bricklayer productivity.” Proc., 3rd North American Masonry Conf., The Masonry Society, Boulder, Colo., 8-1–8-2.
Hines, T. (1993). “Benefits of drystack interlocking concrete masonry as a component of cost effective construction.” Proc., 6th North American Masonry Conf., The Masonry Society, Boulder, Colo., 849–861.
Liou, F., and Borcherding, J. D.(1986). “Work sampling can predict unit rate productivity.” J. Constr. Eng. Manage., 112(1), 90–103.
Mortlock, D. J., and Whitehead, B.(1970). “Productivity in brick and block construction—A literature survey.” Build. Sci., 4, 179–197.
Ramamurthy, K., Sathish, V., Ambalavanan, R.(2000). “Compressive strength prediction of hollow concrete block masonry prisms.” ACI Struct. J., 97, 61–67.
Sanders, S. R., and Thomas, H. R.(1991). “Factors affecting masonry-labor productivity.” J. Constr. Eng. Manage., 117(4), 626–644.
Thomas, H. R., and Daily, J.(1983). “Crew performance measurement via activity sampling.” J. Constr. Eng. Manage., 109(3), 309–320.
Thomas, H. R., Sanders, S. R., and Bilal, S.(1992). “Comparison of labor productivity.” J. Constr. Eng. Manage., 118(4), 635–650.
VanderWerf, P. (1999). “Mortarless block systems.” Masonry Construction, February, 20–24.
Whelan, L. (1985). “Hollow concrete masonry unit shape modification to improve productivity of placement: Results of the preliminary research effort.” Proc., 3rd North American Masonry Conf., The Masonry Society, Boulder, Colo., 9-1–9-8.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: May 25, 2001
Accepted: May 30, 2002
Published online: May 15, 2003
Published in print: Jun 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.