Resource-Based Modeling for Construction Simulation
Publication: Journal of Construction Engineering and Management
Volume 123, Issue 1
Abstract
The application of simulation in the construction industry has always been hindered by the complexities involved in constructing simulation models and the resultant time requirement. This paper presents a modeling method for construction simulation—resource-based modeling (RBM), in which operating processes of active resources are defined as atomic models (basic and unique description of a particular process) and are stored in a model library. These atomic models can be modified to form project-specific atomic models according to user-specified project information. Through defined linking structures, they can be assembled into a working simulation model for the project. Therefore, the user can construct a simulation model for a project by simply specifying required resources and project site conditions. The modeler does not have to be proficient with simulation theory and the selected simulation language. Our experience with implementing simulation in the construction industry shows that this is an effective approach. A sample application is used to illustrate the RBM concepts and its advantages.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Balci, O., and Nance, R. E. (1992). “The simulation model development environment: an overview.”Proc., 1992 Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 762–736.
2.
Bortscheller, B. J., and Saulnier, E. T. (1992). “Model reusability in a graphical simulation package.”Proc., 1992 Winter Simulation Conf., Inst. of Electr. and Electrical Engrs., Piscataway, N.J., 764–772.
3.
Chang, D. (1987). “RESQUE,” PhD thesis, Univ. of Michigan, Ann Arbor, Mich.
4.
Halpin, D. W. (1973). “An investigation of the use of simulation networks for modeling construction operations,” PhD thesis, Univ. of Illinois at Urbana–Champaign, Ill.
5.
Halpin, D. W. (1990). MicroCYCLONE user's manual. Div. of Constr. Engrg. and Mgmt., Purdue Univ., West Lafayette, Ind.
6.
Halpin, D. W., and Riggs, L. S. (1992). “Planning and analysis of construction operations.” Wiley Interscience, New York, N.Y.
7.
Huang, R., Grigoriadis, A. M., and Halpin, D. W. (1994). “Simulation of cable-stayed bridges using DISCO.”Proc., Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 1130–1136.
8.
Ioannou, P. G. (1989). UCYCLONE user's guide. Dept. of Civ. Engrg., Univ. of Michigan, Ann Arbor, Mich.
9.
Liu, L. Y., and Ioannou, P. G. (1992). “Graphical object-oriented discrete-event simulation system.”Proc., Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 1285–1291.
10.
Luna, J.(1991). “Object framework for application of multiple analysis paradigms.”Object-Oriented Simulation 1991, Simulation Ser., 23(3), 81–86.
11.
Luna, J. (1992). “Hierarchical, modular concepts applied to an object-oriented simulation model development environment.”Proc., Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 694–699.
12.
Martinez, J., and Ioannou, P. G. (1994). “General purpose simulation with stroboscope.”Proc., Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 1159–1166.
13.
McCahill, D. F., and Bernold, L. E.(1993). “Resource-oriented modeling and simulation in construction.”J. Constr. Engrg. and Mgmt., ASCE, 119(3), 590–606.
14.
Oloufa, A. A.(1993). “Modeling operational activities in object-oriented simulation.”J. Comp. Civ. Engrg., ASCE, 7(1), 94–106.
15.
Paul, R. J. (1992). “The computer aided simulation modeling environment: an overview.”Proc., 1992 Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 737–746.
16.
Paulson, B. C. Jr.(1978). “Interactive graphics for simulating construction operations.”J. Constr. Div., ASCE, 104(1), 69–76.
17.
Pritsker, A. A. B. (1986). Introduction to simulation and SLAM II, 2nd Ed., Wiley and Pritsker Associates, New York, N.Y.
18.
Sawhney, A., and AbouRizk, S. M.(1995). “Simulation based planning method for construction project.”J. Constr. Engrg. and Mgmt., ASCE, 121(3), 297–303.
19.
Shi, J. (1995). “Automated modeling and optimization for construction simulation,” PhD thesis, Univ. of Alberta, Edmonton, Alta.
20.
Shi, J., and AbouRizk, S. M. (1994). “A resource-based simulation approach with application in earthmoving/strip mining.”Proc., 1994 Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 1124–1129.
21.
Shi, J., and Wales, R. (1994). “An introduction to simulation with a case study from the syncrude reclamation project.” North Am. Constr. Group, Dept. of Civ. Engrg., Univ. of Alberta, Edmonton, Alta.
22.
Tommelein, I. D., and Odeh, A. M. (1994). “Knowledge-based assembly of simulation networks using construction designs, plans, and methods.”Proc., Winter Simulation Conf., Inst. of Electr. and Electronic Engrs., Piscataway, N.J., 1145–1158.
23.
Zeigler, B. P. (1976). Theory of modeling and simulation. John Wiley & Sons, Inc., New York, N.Y.
24.
Zeigler, B. P. (1984). Multifaceted modeling and discrete event simulation. Academic Press, London, England.
25.
Zeigler, P.(1985). “System-theoretic representation of simulation models.”IIE Trans., 16(1), 19–34.
26.
Zeigler, B. P.(1987). “Hierarchical, modular discrete-event modeling in an object-oriented environment.”Simulation, 49(5), 219–230.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.