Flavors and Mixins of Expert Systems Technology Transfer Model for AEC Industry
Publication: Journal of Construction Engineering and Management
Volume 118, Issue 3
Abstract
This paper presents a technology transfer model for expert systems (ES). The model describes the stages of process as well as the factors affecting ES adoption in an organizational setting. The decision to adopt ES is heavily influenced by the top management's attitude toward technology and by factors of an environmental, organizational, and technological nature. However, the decision to adopt ES technology is not sufficient for the success of the process. For ES technology to contribute to the improvement of the organizational performance, the ES applications must be of real value to the organization, must be technically correct, and must be properly utilized by the end users. The paper also presents the methodology used for the development of the model and focuses on the flavors and mixins, that is, the alternative strategies from which managers can choose to introduce ES in their firms. The paper shows that for each stage of the process, there is no single way of performing it. Rather, a spectrum of options are available. Which options are chosen is a function of the characteristics of the firm.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bonnett, R. K. (1989). “From grassroots to grand plan.” AI Expert, 4(8), 54–59.
2.
De La Garza, J. M., and Mitropoulos, P. (1991a). “Technology transfer of expert systems at CRSS: A case study.” Proc. of the Fourth Int. Conf. on Computing in Civil and Building Engineering, Japan Society of Civ. Engrs. (JSCE), Tokyo, Japan, 443–450.
3.
De La Garza, J. M., and Mitropoulos, P. (1991b). “Technology transfer model for expert systems.” J. Constr. Engrg. Mgmt., ASCE, 117(4), 736–755.
4.
De La Garza, J. M., and Mitropoulos, P. (1991c). “Validation of technology transfer model for expert systems in AEC industry.” Proc. of the Fourth Int. Conf. On Computer in Civil and Building Engineering, Japan Society of Civ. Engrs. (JSCE), Tokyo, Japan,393.
5.
De La Garza, J. M., and Mitropoulos, P. (1992). “Technology transfer of expert systems at Stone & Webster Engrg. Corp.: A case study.” CIB '92, World Building Congress, National Research Council Canada, Ottawa, Canada.
6.
Feigenbaum, E., Nii, H., and McCorduck, P. (1988). The rise of the expert company. New York Times Co., New York, N.Y.
7.
Fenves, S. J. (1986). “What is an expert system?” Expert systems in civil engineering, First Symp. on Expert Systems in Civil Engineering, ASCE, New York, N.Y., 1–6.
8.
Hansen, K. L., and Tatum, C. B. (1989). “Technology and strategic management in construction.” J. Mgmt. Engrg., ASCE, 5(1), 67–83.
9.
Helton, T. (1990). “AI diffusion: Getting your company involved.” AI Expert, 5(3), 54–59.
10.
Henderson, J. C., Rockart, J. F., and Sifonis, J. G. (1986). “A planning methodology for integrating management support systems.” The Rise of Managerial Computing, John F. Rockart and Christine V. Bullen, Dow Jones‐Irwin, Homewood, Ill.
11.
Mahler, E., and Meador, C. L. (1989). Executive briefing: Implementation strategies for expert systems. Decision Support Tech., Inc., Boca Raton, Fla.
12.
Mitropoulos, P. (1991). “An expert systems technology transfer model for the architecture‐engineering‐construction industry,” MSc thesis, Virginia Polytechnic Institute and State University, Blacksburg, Va.
13.
Moorhead, G., and Griffin, R. W. (1989). Organizational behavior. Houghton Miflin Co., Boston, Mass.
14.
Prerau, D. S. (1985). “Selection of an appropriate domain for an expert system.” AI Mag., 7(2), 26–30.
15.
Rockart, J. F. (1979). “Chief executives define their own data needs.” Harvard Business Review, 57(2), 81–93.
16.
Rogers, E. M. (1983). Diffusion of innovations. The Free Press, New York, N.Y.
17.
Sankar, Y. (1991). Management of technological change. John Wiley and Sons, New York, N.Y.
18.
Shaffer, L. R. (1985). “Product/system development for military facilities.” Briefing in High Technology Test Bed Concept, U.S. Army Constr. Engrg. Res. Lab., Champaign, Illinois.
19.
Slagle, J. R., and Wick, M. R. (1988). “A method for evaluating candidate expert systems applications.” AI Mag., 9(4), 44–53.
20.
Tatum, C. B. (1986). “Demands and means for construction innovation.” Proc. Technical Session: Construction Innovation, Demands, Successes and Lessons, ASCE, New York, N.Y., 31–43.
21.
Tatum, C. B. (1987). “Process of innovation in construction firm.” J. Constr. Engrg. Mgmt., ASCE, 113(4), 648–663.
22.
Tatum, C. B. (1989a). “Managing for increased design and construction innovation.” J. Mgmt. Engrg., ASCE, 5(4), 385–399.
23.
Tatum, C. B. (1989b). “Organizing to increase innovation in construction firms.” J. Constr. Engrg. Mgmt., ASCE, 115(4), 602–617.
24.
Tatum, C. B., and Funke, A. T. (1988). “Partially automated grading: Construction process innovation.” J. Constr. Engrg. Mgmt., ASCE, 114(1), 19–35.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Sep 1, 1992
Published in print: Sep 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.