Erratum for “Dimensionless Erosion Laws for Cohesive Sediment” by Joseph S. Walder
You are viewing the correction.
VIEW THE CORRECTED ARTICLEPublication: Journal of Hydraulic Engineering
Volume 142, Issue 7
In the original paper, the symbol was mistakenly used in several places where the symbol was intended. In addition, one figure legend is in error. The required corrections are as follows:
On page 04015047-8, the caption of Fig. 4 should read as follows:
Fig. 4. Comparison of time-series data for sediment scour by an impinging jet with theoretical predictions of scour history; the assumption of a linear erosion law implicit in the Hanson and Cook (1997, 2004) model of the JET test was relaxed; dimensionless scour depth and dimensionless time are defined in the main text: (a) data from test 8/8.1/8.4/1 of Mazurek (2001); the material was a manufactured product used for pottery with size distribution 7% sand, 50% silt, 43% clay, and bulk dry specific gravity of 1.54; type curves calculated for and grain specific gravity of 2.67; (b) data from test 8/14.5/9.0/4 of Mazurek (2001) using the same material as in (a); type curves calculated for .
Original Fig. 4(a) is correct as shown; however, the legend for the original Fig. 4(b) is incorrect. The dashed curve corresponds to parameter values , .
On page 04015047-11
Eq. (45) should read
Eq. (46) should read
Eq. (47) should read
Eq. (48) should read
Eq. (49) should read
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 20, 2016
Accepted: Mar 7, 2016
Published online: May 11, 2016
Published in print: Jul 1, 2016
Discussion open until: Oct 11, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.