Erratum for “Bounding Surface Model for Rockfill Materials Dependent on Density and Pressure under Triaxial Stress Conditions” by Yang Xiao, Hanlong Liu, Yumin Chen, and Jingshan Jiang
You are viewing the correction.
VIEW THE CORRECTED ARTICLEPublication: Journal of Engineering Mechanics
Volume 141, Issue 7
The value of the initial void ratio in Fig. 8 (i.e., ) should be rewritten as . Consequently, Fig. 8 in the original paper is redrawn.
The critical state line (CSL) of Tacheng rockfill material (TRM) in the plane is linear, which can be expressed aswhere = mean effective stress; = deviatoric stress the model parameter, and = critical stress ratio.
(1)
Therefore, the equation of the CSL in the plane in Fig. 13 should be rewritten as Eq. (1). And, the curve line of the CSL in the plane in Fig. 13 should be replaced as a straight line. Fig. 13 in the original paper is replotted.
Notation
The following symbols are used in this paper:
- mean effective stress (kPa);
- deviatoric stress (kPa); and
- critical stress ratio.
Acknowledgments
The authors would like to acknowledge Dr. Y. C. Liu and Dr. P. Liu (at the College of Civil and Transportation Engineering, Hohai University) for pointing out the errors in the original paper.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 7, 2014
Accepted: Oct 30, 2014
Published online: Apr 22, 2015
Published in print: Jul 1, 2015
Discussion open until: Sep 22, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.