Reliability Analysis of Mechanical Systems Based on the First Four Moments of Input Parameters

The performance of a mechanical or structural system can be improved through a proper selection of its design parameters such as the geometric dimensions, external actions (loads), and material characteristics. The computation of the reliability of a system, in general, requires a knowledge of the probability distributions of the parameters of the system. It is known that for most practical systems, the exact probability distributions of the parameters are not known. However, the first few moments of the parameters of the system may be readily available in many cases from experimental data. The determination of the reliability and the sensitivity of reliability to variations or fluctuations in the parameters of the system starts with the establishment of a suitable limit state equation. This work presents an approximate reliability analysis for mechanical and structural systems using the fourth-order moment function for approximating the first four moments of the limit state function. By combining the fourth-order moment function with the probabilistic perturbation method, numerical methods are developed for finding the reliability and sensitivity of reliability of the system. An automobile brake and a power screw are considered for demonstrating the methodology and effectiveness of the proposed computational approach. The results of the automobile brake are compared with those given by the Monte Carlo method. This article is available in the ASME Digital Collection at https://doi.org/10.1115/1.4049228.