Comparison of Envelope Prediction for the Trajectory of Dropped Cylinders in Two Dimensions
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 149, Issue 2
Abstract
In offshore engineering, objects, e.g., drill pipes, anchor chains, and some small components, may accidentally fall into the water from ships or offshore platforms, which can cause casualties on decks or damage underwater equipment. The damaged equipment may further harm the environment, such as oil leaking from a damaged wellhead. Therefore, for economic and environmental reasons, a requirement for predicting the trajectory of dropped objects is needed. In this paper, we first propose the state–space motion model of dropped cylinders based on three-degree-of-freedom equations. Instead of being deterministic, the trajectory of the falling cylinder is described as a stochastic process by adding a small perturbation, being Gaussian distributed, to the initial state. Second, three probabilistic methods for state estimation, i.e., the Monte Carlo (MC) method, the unscented method, and the Cubature method, are employed in the envelope prediction of the dropped objects and provide reliable results. The MC method is a classic method for solving stochastic problems and has been applied to study the motion of falling objects. However, it always requires a sufficiently large sample, which results in large computation loads and is not applicable in practical utilization, especially in real-time applications. Simulation results show that the accuracy of the unscented method and the Cubature method are comparable to the MC method, while the computation time is only 0.5% of the MC method. Therefore, the two alternatives other than the MC method significantly improve their application possibilities and provide an effective way for the envelop prediction of dropped cylindrical objects in marine transportation or offshore operations. Furthermore, compared with the unscented method, the Cubature method is a density-assumed method, making itself handy for dynamic and real-time risk assessment of falling objects transported and installed at sea.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aanesland, V. 1987. “Numerical and experimental investigation of accidently falling drilling pipes.” In Offshore Technology Conf. Richardson, TX: OnePetro.
Arasaratnam, I., and S. Haykin. 2009. “Cubature Kalman filters.” IEEE Trans. Autom. Control 54 (6): 1254–1269. https://doi.org/10.1109/TAC.2009.2019800.
Awotahegn, M. 2014. “Experimental investigation of accidental drops of drill pipes and containers.” Master’s thesis, Offshore Technology, Univ. of Stavanger.
Colwill, A., and A. Ahilan. 1992. “Reliability analysis of the behavior of dropped objects.” In Offshore Technology Conf. Richardson, TX: OnePetro.
DNV (Det Norske Veritas). 2010. Risk assessment of pipeline protection. DNV-RP-F107. Oslo, Norway: DNV.
Hoerner, S. 1965. Fluid-dynamic drag. Bakersfield, CA: Hoerner Fluid Dynamics.
Ingram, J. G. 1991. “Experimental modelling and risk assessment of dropped offshore tubulars.” M.Sc. thesis, School of Industrial and Manufacturing Science, Cranfield Institute of Technology.
Julier, S., and J. K. Uhlmann. 1997. “A consistent, debiased method for converting between polar and cartesian coordinate systems.” In Proc., SPIE Acquisition, Tracking, and Pointing XI. Bellingham, WA: SPIE.
Julier, S., J. K. Uhlmann, and H. F. Durrant-Whyte. 2000. “A new method for the nonlinear transformation of means and covariances in filters and estimators.” IEEE Trans. Autom. Control 45 (3): 477–482. https://doi.org/10.1109/9.847726.
Katteland, L., and B. Øygarden. 1995. “Risk analysis of dropped objects for deep water development.” In Int. Conf. Offshore Mechanics and Arctic Engineering, 443–450. New York: ASME.
Luo, Y., and J. Davis. 1992. “Motion simulation and hazard assessment of dropped objects.” In Int. Offshore and Polar Engineering Conf. Richardson, TX: OnePetro.
Meng, H., X. R. Li, and V. P. Jilkov. 2018. “Optimized Gauss-Hermite quadrature with application to nonlinear filtering.” In Proc., 21st Int. Conf. on Information Fusion. New York: IEEE.
Mood, A. M., F. A. Graybill, and D. C. Boes. 1974. Introduction to the theory of statistics. McGraw-Hill Series in Probability and Statistics. New York: McGraw-Hill.
Newman, J. N. 1977. Marine hydrodynamics. Cambridge, MA: MIT Press.
Schlichting, H. 1979. Boundary layer theory. New York: McGraw-Hill.
Xiang, G., L. Birk, L. Li, X. Yu, and Y. Luo. 2016. “Risk free zone study for cylindrical objects dropped into water.” Ocean Syst. Eng. 6 (4): 377–400. https://doi.org/10.12989/ose.2016.6.4.377.
Xiang, G., L. Birk, X. Yu, and H. Lu. 2017. “Numerical study on the trajectory of dropped cylindrical objects.” Ocean Eng. 130: 1–9. https://doi.org/10.1016/j.oceaneng.2016.11.060.
Yu, X., H. Meng, Y. Zhen, and L. Li. 2019. “Trajectory prediction of cylinders freely dropped into water in two dimensions based on state space model.” Ocean Eng. 187: 106154. https://doi.org/10.1016/j.oceaneng.2019.106154.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 31, 2022
Accepted: Sep 30, 2022
Published online: Dec 6, 2022
Published in print: Mar 1, 2023
Discussion open until: May 6, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.