Role of Freeway Ramp Geometry on Driver Acceleration and Merging Behavior
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 150, Issue 8
Abstract
Design guidelines for freeway ramp entrances are based on speed and acceleration data collected before 1950. This study investigated driver behavior over the entire freeway entrance area, including the ramp, the acceleration speed-change lane (SCL), and the freeway right lane (FRL). Video-based trajectory and speed profile data were collected using unmanned aerial vehicles (UAVs) and were used for qualitative and quantitative analysis. General trends of the relationships between driver behavior measures and geometric characteristics of entrance ramp terminals were investigated under different traffic and design conditions. Results showed that vehicles tended to merge onto the freeway at relatively low speeds such that the difference between their mean speed at merging and that of FRL vehicles was statistically significant. Results also confirmed that SCL drivers tended to start acceleration after they passed the middle of the ramp controlling curve. Regression models were developed for predicting driver-vehicle behavior on SCLs and on-ramp curves using traditional regression for each parameter separately and simultaneous modeling using structural equation modeling. An example application is presented to demonstrate the use of the developed models in reliability analysis of entrance ramps, which can be used to establish probabilistic road design guidelines.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors wish to acknowledge Taibah University, Saudi Arabia, for financially supporting this research. The authors also thank Transoft Solutions for providing access to their platform to process the UAV videos.
References
AASHTO. 2018. A policy on geometric design of highways and streets, 7th ed. Washington, DC: AASHTO.
Ahammed, M. A., Y. Hassan, and T. A. Sayed. 2008. “Modeling driver behavior and safety on freeway merging areas.” J. Transp. Eng. 134 (9): 370–377. https://doi.org/10.1061/(ASCE)0733-947X(2008)134:9(370).
Alamry, F. 2023. “Examining driver behaviour at freeway ramp terminals based on trajectory data collected using unmanned aerial vehicles and video image processing.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Carleton Univ.
Alamry, F., and Y. Hassan. 2022. “Using single and multiple unmanned aerial vehicles for microscopic driver behaviour data collection at freeway interchange ramps.” Can. J. Civ. Eng. 49 (2): 212–221. https://doi.org/10.1139/cjce-2020-0801.
Alamry, F., and Y. Hassan. 2023. “Driver behavior performance at freeway exit ramp terminals: Investigation and modeling.” J. Transp. Eng. Part A. Syst. 149 (5): 04023024. https://doi.org/10.1061/JTEPBS.TEENG-7628.
Alyamani, M., and Y. Hassan. 2021. “Driver behavior on freeway entrance ramp terminals.” J. Transp. Eng. Part A. Syst. 147 (12): 04021090. https://doi.org/10.1061/JTEPBS.0000606.
Bentler, P. M. 1990. “Comparative fit indexes in structural models.” Psychol. Bull. 107 (2): 238–246. https://doi.org/10.1037/0033-2909.107.2.238.
Brewer, M. A., K. Fitzpatrick, and J. Stanley. 2011. “Driver behavior on speed-change lanes at freeway ramp terminals.” Transp. Res. Rec. 2223 (1): 54–62. https://doi.org/10.3141/2223-07.
Brewer, M. A., and J. Stibbe. 2019. “Investigation of design speed characteristics on freeway ramps using SHRP2 naturalistic driving data.” Transp. Res. Rec. 2673 (1): 247–258. https://doi.org/10.1177/0361198118823515.
Calvi, A., and M. R. De Blasiis. 2011. “Driver behavior on acceleration lanes: Driving simulator study.” Transp. Res. Rec. 2248 (1): 96–103. https://doi.org/10.3141/2248-13.
Dhahir, B., and Y. Hassan. 2019. “Using horizontal curve speed reduction extracted from the naturalistic driving study to predict curve collision frequency.” Accid. Anal. Prev. 123 (Feb): 190–199. https://doi.org/10.1016/j.aap.2018.11.020.
Fatema, T., and Y. Hassan. 2013. “Probabilistic design of freeway entrance speed-change lanes considering acceleration and gap acceptance behavior.” Transp. Res. Rec. 2348 (1): 30–37. https://doi.org/10.3141/2348-04.
Fatema, T., K. Ismail, and Y. Hassan. 2014. “Validation of probabilistic model for design of freeway entrance speed change lanes.” Transp. Res. Rec. 2460 (1): 97–106. https://doi.org/10.3141/2460-11.
Fatema, T., K. Ismail, and Y. Hassan. 2015. “Development and evaluation of generalized model specification for probabilistic design of acceleration speed change lanes.” In Proc., 94th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
Fitzpatrick, K., and K. Zimmerman. 2007. “Potential updates to 2004 Green Book’s acceleration lengths for entrance terminals.” Transp. Res. Rec. 2023 (1): 130–139. https://doi.org/10.3141/2023-14.
Gu, X., M. Abdel-Aty, Q. Xiang, Q. Cai, and J. Yuan. 2019. “Utilizing UAV video data for in-depth analysis of drivers’ crash risk at interchange merging areas.” Accid. Anal. Prev. 123 (Feb): 159–169. https://doi.org/10.1016/j.aap.2018.11.010.
Hassan, Y., M. Sarhan, and M. Salehi. 2012. “Probabilistic model for design of freeway acceleration speed-change lanes.” Transp. Res. Rec. 2309 (1): 3–11. https://doi.org/10.3141/2309-01.
HCM (Highway Capacity Manual). 2022. Highway capacity manual. 7th ed. Washington, DC: Transportation Research Board.
Hunter, M., R. Machemehl, and A. Tsyganov. 2001. “Operational evaluation of freeway ramp design.” Transp. Res. Rec. 1751 (1): 90–100. https://doi.org/10.3141/1751-11.
Kanteti, H. N., and Y. Hassan. 2022. “Can vehicle connectivity improve safety at freeway on-ramps?” In Proc., 6th Int. Symp. on Highway Geometric Design. Amsterdam, Netherlands: Transportation Research Board.
Khan, M. A., W. Ectors, T. Bellemans, D. Janssens, and G. Wets. 2017. “Unmanned aerial vehicle–based traffic analysis: Methodological framework for automated multivehicle trajectory extraction.” Transp. Res. Rec. 2626 (1): 25–33. https://doi.org/10.3141/2626-04.
Kline, R. B. 2005. Principles and practice of structural equation modeling. 2nd ed. New York: Guilford Press.
Kunicki, Z. J., M. L. Smith, and E. J. Murray. 2023. “A primer on structural equation model diagrams and directed acyclic graphs: When and how to use each in psychological and epidemiological research.” Adv. Methods Pract. Psychol. Sci. 6 (2): 251524592311560. https://doi.org/10.1177/25152459231156085.
Li, L., R. Jiang, Z. He, X. M. Chen, and X. Zhou. 2020. “Trajectory data-based traffic flow studies: A revisit.” Transp. Res. Part C Emerging Technol. 114 (May): 225–240. https://doi.org/10.1016/j.trc.2020.02.016.
Morris, C. M., and E. T. Donnell. 2014. “Passenger car and truck operating speed models on multilane highways with combinations of horizontal curves and steep grades.” J. Transp. Eng. 140 (11): 04014058. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000715.
Pakzadnia, A., and Y. Hassan. 2023. “Expected safety performance of different freeway merging strategies in an environment of mixed vehicle technologies.” J. Transp. Eng. Part A. Syst. 149 (2): 04022143. https://doi.org/10.1061/JTEPBS.TEENG-7280.
Shankar, V., and F. Mannering. 1998. “Modeling the endogeneity of lane-mean speeds and lane-speed deviations: A structural equations approach.” Transp. Res. Part A Policy Pract. 32 (5): 311–322. https://doi.org/10.1016/S0965-8564(98)00003-2.
Shi, D., T. Lee, and A. Maydeu-Olivares. 2019. “Understanding the model size effect on SEM fit indices.” Educ. Psychol. Meas. 79 (2): 310–334. https://doi.org/10.1177/0013164418783530.
Sultana, T., and Y. Hassan. 2021. “Modeling speed behavior of connected vehicles on horizontal curves.” Adv. Transp. Stud. 55 (Nov): 87–104. https://doi.org/10.53136/97912599438356.
TAC (Transportation Association of Canada). 2017. Geometric design guide for Canadian roads. Ottawa: TAC.
Torbic, D. J., and M. A. Brewer. 2018. “Enhanced design guidelines for interchange loop ramps.” Transp. Res. Rec. 2672 (1): 20–33. https://doi.org/10.1177/0361198118758394.
Torbic, D. J., J. M. Hutton, C. D. Bokenkroger, and M. A. Brewer. 2012. “Design guidance for freeway main-line ramp terminals.” Transp. Res. Rec. 2309 (1): 48–60. https://doi.org/10.3141/2309-06.
Wang, L., F. Chen, and H. Yin. 2016. “Detecting and tracking vehicles in traffic by unmanned aerial vehicles.” Autom. Constr. 72 (Dec): 294–308. https://doi.org/10.1016/j.autcon.2016.05.008.
Yang, G., Z. Tian, H. Xu, and Z. Wang. 2016. “Recommendations for acceleration lane length for metered on-ramps.” Transp. Res. Rec. 2588 (1): 1–11. https://doi.org/10.3141/2588-01.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Feb 19, 2024
Accepted: Mar 29, 2024
Published online: Jun 13, 2024
Published in print: Aug 1, 2024
Discussion open until: Nov 13, 2024
ASCE Technical Topics:
- Design (by type)
- Driver behavior
- Engineering fundamentals
- Geometrics
- Highway and road design
- Highway and road management
- Highway transportation
- Highways and roads
- Infrastructure
- Models (by type)
- Ramps (road)
- Structural behavior
- Structural engineering
- Structural models
- Traffic engineering
- Transportation engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.