Optimally Locating Weigh-in-Motion Stations and Truck-Prohibited Roads for Mitigating the Impact of Overweight Trucks
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 149, Issue 1
Abstract
Weigh-in-motion (WIM) stations are effective but expensive tools for the monitoring and enforcement of truck weight regulations. Faced with the increasing challenges of maintaining highways with ever shrinking financial resources, traffic authorities may need to couple WIM stations with other cost-effective measures for regulating truck weights. This study explores the idea of integrating WIM stations and truck-prohibited roads to reduce the impact of overloaded trucks on highway pavements and bridges. The problem of optimally locating WIM stations and truck-prohibited roads is formulated as a bilevel programming model. The upper-level model mimics the decision-making behavior of the traffic authority, whose aim is to determine the optimal locations for the deployment of WIM stations and the selection of truck-prohibited roads so as to minimize the total cost while considering route choices of overweight trucks. The lower-level models are used to determine the least cost paths for the overweight trucks of different origin–destination (OD) pairs in response to the authority’s decisions in the upper-level model. A heuristic that iteratively solves the upper-level and the lower-level models is developed to efficiently solve the bilevel model, which is characterized as NP-hard. The proposed model and heuristic were evaluated using test instances generated based on the Nevada road network. The results demonstrate the advantage of using hybrid or multiple enforcement measures to prevent damage to the road network by overweight trucks in comparison with the traditional WIM-only approach.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This study was supported by grants (MOST-110-2221-E-008-025-MY3 and MOST-110-2221-E-008-026) from the Ministry of Science and Technology, Taiwan.
References
AlGadhi, S. A. 2002. “Optimizing truck weigh stations’ locations on the highway network of Saudi Arabia.” J. King Saud Univ. 14 (2): 147–163. https://doi.org/10.1016/S1018-3639(18)30750-5.
Bard, J. F. 1998. Practical bilevel optimization: Applications and algorithms. Amsterdam, Netherlands: Kluwer Academic Press.
Bard, J. F., and J. E. Falk. 1982. “An explicit solution to the multilevel programming problem.” Comput. Oper. Res. 9 (1): 77–100. https://doi.org/10.1016/0305-0548(82)90007-7.
Barnes, G., and P. Langworthy. 2003. The per-mile costs of operating automobiles and trucks. Minneapolis: Univ. of Minnesota.
Besinovic, N., N. Markovia, and P. Schonfeld. 2013. “Optimal allocation of truck inspection stations based on k-shortest paths.” In Proc., Transportation Research Board 92th Annual Meeting. Washington, DC: Transportation Research Board.
Chou, C. P., and Y. H. Chen. 2002. “Recent development and implementation of weigh-in-motion in some Asian countries.” In Proc., 3rd Int. Conf. on Weigh-in-Motion (ICWIM3). Ames, IA: Center for Transportation Research and Education, Iowa State Univ. Orlando, FL.
Colson, B., P. Marcotte, and G. Savard. 2005. “Bilevel programming: A survey.” 4OR 3 (2): 87–107. https://doi.org/10.1007/s10288-005-0071-0.
Cottrell, B. H., Jr. 1992. The avoidance of weigh stations in Virginia by overweight trucks. Technical Rep. Charlottesville, VA: Virginia Transportation Research Council.
Dey, K., M. Chowdhury, W. Pang, B. Putman, and L. Chen. 2014. “Estimation of pavement and bridge damage costs due to overweight trucks.” Transp. Res. Rec. 2411 (1): 62–71. https://doi.org/10.3141/2411-08.
FHWA (Federal Highway Administration). 2007. Effective use of weigh-in-motion data: The Netherlands case study. Washington, DC: FHWA.
Filippi, F., A. Nuzzolo, A. Comi, and P. Delle Site. 2010. “Ex-ante assessment of urban freight transport policies.” Procedia-Social Behav. Sci. 2 (3): 6332–6342. https://doi.org/10.1016/j.sbspro.2010.04.042.
Forkenbrock, D. J. 1999. “External costs of intercity truck freight transportation.” Transp. Res. Part A: Policy Pract. 33 (7–8): 505–526. https://doi.org/10.1016/S0965-8564(98)00068-8.
Gao, Z., H. Sun, and L. Shan. 2004. “A continuous equilibrium network design model and algorithm for transit systems.” Transp. Res. Part B: Methodol. 38 (3): 235–250. https://doi.org/10.1016/S0191-2615(03)00011-0.
Han, L. D., S.-S. Ko, Z. Gu, and M. K. Jeong. 2012. “Adaptive weigh-in-motion algorithms for truck weight enforcement.” Transp. Res. Part C: Emerging Technol. 24 (Oct): 256–269. https://doi.org/10.1016/j.trc.2012.01.010.
Holguín-Veras, J., C. A. Torres, and B. Xuegang. 2013. “On the comparative performance of urban delivery vehicle classes.” Transportmetrica A: Transp. Sci. 9 (1): 50–73. https://doi.org/10.1080/18128602.2010.523029.
Jacob, B., and H. van Loo. 2008. “Weigh-in-motion for enforcement in Europe.” In Proc., Fifth Int. Conf. on Weigh-In-Motion. New York: Wiley.
Jacon, B., and V. F. Beaumelle. 2010. “Improving truck safety: Potential of weigh-in-motion technology.” IATSS Res. 34 (1): 9–15. https://doi.org/10.1016/j.iatssr.2010.06.003.
Jeroslow, R. G. 1985. “The polynomial hierarchy and a simple model for competitive analysis.” Math. Program. 32 (2): 146–164. https://doi.org/10.1007/BF01586088.
LeBlanc, L. J., and D. E. Boyce. 1986. “A bilevel programming algorithm for exact solution of the network design problem with user-optimal flows.” Transp. Res. Part B: Methodol. 20 (3): 259–265. https://doi.org/10.1016/0191-2615(86)90021-4.
Lu, C. C., X. Zhou, and K. Zhang. 2013. “Dynamic origin-destination demand flow estimation under congested traffic conditions.” Transp. Res. Part C: Emerging Technol. 34 (Sep): 16–37. https://doi.org/10.1016/j.trc.2013.05.006.
Lu, C.-C., S. Yan, H.-C. Ko, and H.-J. Chen. 2018. “A bilevel model with a solution algorithm for locating weigh-in-motion stations.” IEEE Trans. Intell. Transp. Syst. 19 (2): 380–389. https://doi.org/10.1109/TITS.2017.2696046.
Lu, Q., J. Harvey, T. Le, J. Lea, R. Quinley, D. Redo, and J. Avis. 2002. Truck traffic analysis using weigh-in-motion (WIM) data in California. Berkeley, CA: Univ. of California.
Lyons, L., A. Lozano, F. Granados, and A. Guzmán. 2017. “Impacts of time restriction on heavy truck corridors: The case study of Mexico City.” Transp. Res. Part A: Policy Pract. 102 (Aug): 119–129. https://doi.org/10.1016/j.tra.2017.03.012.
Lyons, L., A. Lozano, F. Granados, A. Guzmán, and J. P. Antún. 2012. “Impact of the recent environmental policies on the freight transportation in Mexico City.” Procedia-Social Behav. Sci. 39 (Jan): 437–449. https://doi.org/10.1016/j.sbspro.2012.03.120.
Mahmoudabadi, A., and S. M. Seyedhosseini. 2013. “Improving the efficiency of weigh in motion systems through optimized allocating truck checking oriented procedure.” IATSS Res. 36 (2): 123–128. https://doi.org/10.1016/j.iatssr.2012.08.002.
Markovic, N., I. O. Ryzhov, and P. Schonfeld. 2015. “Evasive flow capture: Optimal location of weigh-in-motion systems, tollbooths, and security checkpoints.” Networks 65 (1): 22–42. https://doi.org/10.1002/net.21581.
Markovic, N., I. O. Ryzhov, and P. Schonfeld. 2017. “Evasive flow capture: A multi-period stochastic facility location problem with independent demand.” Eur. J. Oper. Res. 257 (2): 687–703. https://doi.org/10.1016/j.ejor.2016.08.020.
Martin, A., V. Keathley, J. Kissick, and J. Walton. 2014. Coordinating the use and location of weigh-in-motion technology for Kentucky. Lexington, KY: Univ. of Kentucky.
Mirchandani, P. B., R. Rebello, and A. Agnetis. 1995. “The inspection station location problem in hazardous material transportation: Some heuristics and bounds.” INFOR: Inf. Syst. Oper. Res. 33 (2): 100–113. https://doi.org/10.1080/03155986.1995.11732271.
Nakamura, Y., E. Taniguchi, T. Yamada, and N. A. Ando. 2008. “Macroscopic traffic simulator for evaluating urban transport measures for heavy vehicles.” In Innovations in city logistics, edited by E. Taniguchi and R. Thompson, 185–196. New York: Nova Science Publishers.
Quak, H., and M. De Koster. 2007. “Exploring retailers’ sensitivity to local sustainability policies.” J. Oper. Manage. 25 (6): 1103–1122. https://doi.org/10.1016/j.jom.2007.01.020.
Šelmi´c, M., N. Bešinovi´c, and D. Teodorovi´c. 2011. “Locating weigh-in-motion checkpoints in traffic networks using genetic algorithm.” E-Soc. J. 2 (1): 55–66.
Stephens, J., and J. Carson. 2003. An evaluation of Montana’s state truck activities reporting system (STARS). Missoula, MT: Montana DOT.
Sujon, M., and F. Dai. 2021. “Application of weigh-in-motion technologies for pavement and bridge response monitoring: State-of-the-art review.” Autom. Constr. 130 (Oct): 103844. https://doi.org/10.1016/j.autcon.2021.103844.
Szary, J., and A. Maher. 2009. Implementation of weigh-in-motion (WIM) systems. Washington, DC: Federal Highway Administration.
Szeto, W., and Y. Jiang. 2014. “Transit route and frequency design: Bi-level modeling and hybrid artificial bee colony algorithm approach.” Transp. Res. Part B: Methodol. 67 (Sep): 235–263. https://doi.org/10.1016/j.trb.2014.05.008.
TRB (Transportation Research Board) and National Research Council. 1990. Truck weight limits: Issues and options, committee for the truck weight study. Washington, DC: TRB.
Wei, T., and J. D. Fricker. 2003. Weigh-in-motion data checking and imputation. West Lafayette, IN: Purdue Univ.
Yang, H., and M. G. H. Bell. 1997. “Traffic restraint, road pricing and network equilibrium.” Transp. Res. Part B: Methodol. 31 (4): 303–314. https://doi.org/10.1016/S0191-2615(96)00030-6.
Yang, H., T. Sasaki, Y. Iida, and Y. Asakura. 1992. “Estimation of origin-destination matrices from link traffic counts on congested networks.” Transp. Res. Part B: Methodol. 26 (6): 417–434. https://doi.org/10.1016/0191-2615(92)90008-K.
Yu, B., L. Kong, Y. Sun, B. Yao, and Z. Gao. 2015. “A bi-level programming for bus lane network design.” Transp. Res. Part C: Emerging Technol. 55 (Jun): 310–327. https://doi.org/10.1016/j.trc.2015.02.014.
Zhou, X., and H. S. Mahmassani. 2006. “Dynamic OD demand estimation using automatic vehicle identification data.” IEEE Trans. Intell. Transp. Syst. 7 (1): 105–114. https://doi.org/10.1109/TITS.2006.869629.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Apr 7, 2022
Accepted: Sep 14, 2022
Published online: Nov 14, 2022
Published in print: Jan 1, 2023
Discussion open until: Apr 14, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.