Innovative Roadside Design Curve of Lateral Clearance: Roadway Spiraled Horizontal Curves
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 143, Issue 8
Abstract
This paper presents an innovative design method for determining lateral clearance needs on a spiraled horizontal curve to satisfy sight distance requirements. The roadside lateral clearance is represented by a spiraled horizontal curve that is easy to implement in practice. The design parameters were determined. The characteristics of the corresponding lateral offsets were explored for the influential roadway factors, including required sight distance or design speed, curve radius, curve length, spiral curve length, and station location expressed in fraction of sight distance. The results show that ratio of spiral curve length to required sight distance is the major factor that affects the ratio of the lateral offset to the maximum offset at a circular curve. A single design chart and a design table also are provided as alternative design tools to determine the offset for a specific obstruction location. The proposed design method not only greatly improves the AASHTO approximate approach, but also provides an alternative approach to improving design consistency on horizontal alignments. This paper complements another paper on lateral clearance needs for simple horizontal curves.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by a Discovery Grant from the Natural Sciences and Engineering Research Council of Canada.
References
AASHTO. (2010). “Highway safety manual.” Washington, DC.
AASHTO. (2011). “A policy on geometric design of highways and streets.” Washington, DC.
Berg, W. D., Choi, J., and Kuipers, E. J. (1989). “Development of highway alignment information from photolog data.” Transp. Res. Rec., 1239, 54–61.
Easa, S. M. (1991). “Lateral clearance to vision obstacles on horizontal curves.” Transp. Res. Rec., 1303, 22–32.
Easa, S. M. (1993). “Lateral clearance needs on compound horizontal curves.” J. Transp. Eng., 111–123.
Easa, S. M. (1994). “Design considerations for highway reverse curves.” Transp. Res. Rec., 1445, 1–11.
Fink, K. L., and Krammes, R. A. (1995). “Tangent length and sight distance effects on accident rates at horizontal curves on rural two-lane highways.” Transp. Res. Rec., 1500, 162–168.
Glennon, J. C. (1987). “Effects of sight distance on highway safety.” Transp. Res. Board, 6, 64–77.
Hassan, Y., Easa, S. M., and Abd El Halim, A. O. (1995). “Sight distance on horizontal alignments with continuous lateral obstructions.” Transp. Res. Rec., 1500, 31–42.
Hassan, Y., Easa, S. M., and Abd El Halim, A. O. (1996). “Analytical model for sight distance analysis on three-dimensional highway alignments.” Transp. Res. Rec., 1523, 1–10.
Hassan, Y., Easa, S. M., and Abd El Halim, A. O. (1997). “Modeling headlight sight distance on three-dimensional highway alignments.” Transp. Res. Rec., 1579, 79–88.
Hassan, Y., Easa, S. M., and Abd El Halim, A. O. (1998). “Highway alignment: three-dimensional problem and three-dimensional solution.” Transp. Res. Rec., 1612, 17–25.
Jha, M. K., Karri, G. A. K., and Kuhn, W. (2011). “New three-dimensional highway design methodology for sight distance measurement.” Transp. Res. Rec., 2262, 74–82.
Liu, C. (2013). “Exact sight distance determination on compound vertical and horizontal curves in the presence of road barriers.” Int. J. Transp. Sci. Technol., 2(2), 159–166.
Liu, C., and Wang, Z. (2012). “Deriving sight distance on a compound sag and circular curve in a three-dimensional space.” Int. J. Transp. Sci. Technol., 1(3), 297–304.
Lovell, D. J. (1999). “Automated calculation of sight distance from horizontal geometry.” J. Transp. Eng., 297–304.
Lovell, D. J., and Iida, I. (2003). “The exact clear zone envelope for piecewise-linear alignment data.” Transp. Res. Part B, 37(5), 485–499.
Lovell, D. J., Jong, J. C., and Chang, P. C. (2001a). “Clear zone requirements based on horizontal sight distance considerations.” Transp. Res. Part A, 35(5), 391–411.
Lovell, D. J., Jong, J. C., and Chang, P. C. (2001b). “Improvements to sight distance algorithm.” J. Transp. Eng., 283–288.
Mauga, T. (2014). “Horizontal clearance offsets to objects higher than sightlines.” Transp. Res. Rec., 2436, 23–31.
Mauga, T. (2015). “New spiral curves for appropriate transition of minimum roadside clearance on simple curves.” J. Transp. Technol., 5(3), 141–158.
Mauga, T., Ghanma, M., and Ahmed, K. (2013). “Roadside clearance limit on horizontal curves with transitional arcs.” Transp. Res. Rec., 2358, 20–28.
Medina, A. M. F., and Tarko, A. P. (2005). “Speed factors on two-lane rural highways in free-flow conditions.” Transp. Res. Rec., 1912, 39–46.
Olson, P. L., Cleveland, D. E., Fancher, P. S., and Schneider, L. W. (1984). “Parameters affecting stopping sight distance.”, Univ. of Michigan, Transportation Research Institute, Washington, DC.
Raymond, W. L. (1972). “Offsets to sight obstructions near the ends of horizontal curves.” J. Civ. Eng., 42(1), 71–72.
Sarhan, M., and Hassan, Y. (2012). “Consideration of sight distance in placement of concrete barriers on horizontal curves of roads.” Transp. Res. Rec., 2301, 9–16.
Waissi, G. R., and Cleveland, D. E. (1987). “Sight distance relationship involving horizontal curves.” Transp. Res. Rec., 1122, 96–107.
Wood, J. S., and Donnell, E. T. (2014). “Stopping sight distance and horizontal sight line offsets at horizontal curves.” Transp. Res. Rec., 2436, 43–50.
You, Q. C., and Easa, S. M. (2016). “Innovative roadside design curve of lateral clearance: roadway simple horizontal curves.” J. Transp. Eng., .
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 16, 2016
Accepted: Nov 17, 2016
Published online: Mar 27, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 27, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.