Wedging Model of Compressive Membrane Action for a Conical-Fan Failure Mode in a Reinforced Concrete Plate with In-Plane Restraint
Publication: Journal of Structural Engineering
Volume 150, Issue 11
Abstract
The paper introduces a new model of compressive membrane action (CMA) for a conical fan failure mechanism around a patch load in a reinforced concrete plate with in-plane restraint. The new model is based on a concept of 3-dimensional wedging and it is fundamentally different from conventional arching models of CMA. The new model accounts for the effects of CMA on the bending resistance at yield lines and the complementary wedging effect of compressive membrane forces at the yield lines, considering the interaction between the radial and tangential forces acting on the wedgelike segments in a restrained fan. The model was developed in the context of an investigation of the strength of fiber reinforced shotcrete (FRS) tunnel linings, but it is readily adaptable for conventional reinforced concrete plates and slabs. The paper compares the wedging model results (predicted load-deflection curves) with field test results for FRS tunnel linings. It is shown that the wedging model provides a good approximation to the available test results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
ASTM. 2020. Standard test method for flexural toughness of fiber reinforced concrete (using centrally loaded round panel). ASTM C1550. West Conshohocken, PA: ASTM.
Bernard, E. S., D. A. F. Oliveira, and B. H. Forrest. 2022. “In situ flexural failure of unbonded fibre reinforced shotcrete linings in response to point loading.” Tunnelling Underground Space Technol. 119 (Jan): 104235. https://doi.org/10.1016/j.tust.2021.104235.
Bernard, E. S., and A. H. Thomas. 2020. “Fibre reinforced sprayed concrete for ground support.” Tunnelling Underground Space Technol. 99 (May): 103302. https://doi.org/10.1016/j.tust.2020.103302.
Burgess, I., and B. Chan. 2020. “An integrated yield-line approach to tensile and compressive membrane actions in thin lightly-reinforced concrete slabs.” Eng. Struct. 208 (Apr): 110321. https://doi.org/10.1016/j.engstruct.2020.110321.
Einpaul, J., M. F. Ruiz, and A. Muttoni. 2015. “Influence of moment redistribution and compressive membrane action on punching strength of flat slabs.” Eng. Struct. 86 (Mar): 43–57. https://doi.org/10.1016/j.engstruct.2014.12.032.
fib. 2010. Model code for concrete structures. Lausanne, Switzerland: fib.
Hognestad, E. 1953. “Yield-line theory for the ultimate flexural strength of reinforced concrete slabs.” ACI J. Proc. 49 (3): 637–656.
Johansen, K. W. 1943. Brudlinieteorier [Yield line theory]. London: Cement and Concrete Association.
Muttoni, A. 2008. “Punching shear strength of reinforced concrete slabs without transverse reinforcement.” ACI Struct. J. 105 (4): 440–450.
Ockleston, A. J. 1955. “Load tests on a three storey reinforced concrete building in Johannesburg.” Struct. Eng. 33 (10): 304–322.
Park, R. 1964. “Ultimate strength of rectangular concrete slabs under short-term uniform loading with edges restrained against lateral movement.” Proc. Inst. Civ. Eng. 28 (2): 125–150. https://doi.org/10.1680/iicep.1964.10109.
Park, R., and W. L. Gamble. 2000. Reinforced concrete slabs. New York: Wiley.
Reid, S. G., and E. S. Bernard. 2021. “The Influence of in-plane restraint on the point load resistance of fiber reinforced shotcrete.” Struct. Concr. 22 (1): 476–490. https://doi.org/10.1002/suco.201900471.
Taylor, S. E., G. I. B. Rankin, and D. J. Cleland. 2002. A guide to compressive membrane action in concrete bridge decks. Crowthorne, UK: Concrete Bridge Development Group.
Wood, R. H. 1961. Plastic and elastic design of slabs and plates, with particular reference to reinforced concrete floor slabs, 225–261. London: Thames and Hudson.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 17, 2023
Accepted: Jun 11, 2024
Published online: Sep 11, 2024
Published in print: Nov 1, 2024
Discussion open until: Feb 11, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.