Stiffness Reduction of Cold-Formed Steel Structures Subject to Sectional Buckling and Yielding
Publication: Journal of Structural Engineering
Volume 149, Issue 11
Abstract
The paper develops a stiffness reduction factor to be used in geometric nonlinear beam-element type elastic analysis of cold-formed steel structures. The factor accounts for the reduction in flexural and warping torsion rigidities resulting from local and distortional buckling as well as residual stresses, particular to cold-formed steel structures. The purpose of applying the factor is to accurately account for the geometric second order effects when predicting the internal distributions of moments of cold-formed steel structural frames. The stiffness reduction factor arising from local and distortional buckling is first determined followed by the stiffness reduction factor caused by residual stresses. Subsequently, the two effects are combined in a single expression, which is a format suitable for incorporation in the North American specification for cold-formed steel structures, AISI-S100.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This project was undertaken as a part of Australian Research Council (ARC) Discovery Project DP220103573. The constructive comments offered by Prof Gregory Hancock are gratefully acknowledged.
References
AISC. 2016. Specification for structural steel buildings. AISC-360. Chicago: AISC.
AISC. 2022. Specification for structural steel buildings. AISC-360. Chicago: AISC.
AISI (American Iron and Steel Institute). 2016. North American specification for the design of cold-formed steel structural members. AISI-S100. Washington, DC: AISI.
Bijlaard, P., and G. Fisher. 1953. Column strength of H-sections and square tubes in postbuckling range of component plates. Washington, DC: National Advisory Committee for Aeronautics.
Graves Smith, T. R. 1969. “The ultimate strength of locally buckled columns of arbitrary length.” In Proc., Symp. on Thin-walled Structures, edited by K. C. Rockey and H. V. Hill, 35–60. London: Crosby-Lockwood.
Hancock, G. J. 1981. “Interaction buckling in I-section columns.” J. Struct. Div. 107 (1): 165–179. https://doi.org/10.1061/JSDEAG.0005620.
Key, P. W., and G. J. Hancock. 1993. “A theoretical investigation of the column behaviour of cold-formed square hollow sections.” Thin-Walled Struct. 16 (1–4): 31–64. https://doi.org/10.1016/0263-8231(93)90040-H.
Liu, W., K. J. R. Rasmussen, and H. Zhang. 2017. “Modelling and probabilistic study of the residual stress of cold-formed hollow steel sections.” Eng. Struct. 150 (Nov): 986–995. https://doi.org/10.1016/j.engstruct.2017.08.004.
Ma, J.-L., T.-M. Chan, and B. Young. 2015. “Material properties and residual stresses of cold-formed high strength steel hollow sections.” J. Constr. Steel Res. 109 (Jun): 152–165. https://doi.org/10.1016/j.jcsr.2015.02.006.
Rasmussen, K. J. R. 1997. “Bifurcation of locally buckled members.” Thin-Walled Struct. 28 (2): 117–154. https://doi.org/10.1016/S0263-8231(97)00004-9.
Rasmussen, K. J. R. 2006. “Bifurcation of locally buckled point symmetric columns—Analytical developments.” Thin-Walled Struct. 44 (11): 1161–1174. https://doi.org/10.1016/j.tws.2006.10.004.
Rasmussen, K. J. R., and G. J. Hancock. 1988. “Geometric imperfections in plated structures subject to interaction between buckling modes.” Thin-Walled Struct. 6 (6): 433–452. https://doi.org/10.1016/0263-8231(88)90012-2.
Rasmussen, K. J. R., and A. S. Hasham. 1997. “Flexural and flexural-torsional bifurcation of locally buckled beam-columns.” Thin-Walled Struct. 29 (1–4): 203–233. https://doi.org/10.1016/S0263-8231(97)00023-2.
Schafer, B. W., and T. Pekoz. 1998. “Computational modeling of cold-formed steel: Characterizing geometric imperfections and residual stresses.” J. Constr. Steel Res. 47 (3): 193–210. https://doi.org/10.1016/S0143-974X(98)00007-8.
Silvestre, N., and D. Camotim. 2006. “Local-plate and distortional postbuckling behavior of cold-formed steel lipped channel columns with intermediate stiffeners.” J. Struct. Eng. 132 (4): 529–540. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(529).
Surovek, A. E. 2011. Advanced analysis in steel frame design: Guidelines for direct second-order inelastic analysis. Reston, VA: ASCE.
Yao, Y., W.-M. Quach, and B. Young. 2019. “Finite element-based method for residual stresses and plastic strains in cold-formed steel hollow sections.” Eng. Struct. 188 (Jun): 24–42. https://doi.org/10.1016/j.engstruct.2019.03.010.
Young, B., and K. J. R. Rasmussen. 1997. “Bifurcation of singly symmetric columns.” Thin-Walled Struct. 28 (2): 155–177. https://doi.org/10.1016/S0263-8231(97)00005-0.
Young, B., and K. J. R. Rasmussen. 2000. “Inelastic bifurcation of cold-formed singly symmetric columns.” Thin-Walled Struct. 36 (3): 213–230. https://doi.org/10.1016/S0263-8231(99)00046-4.
Zeinoddini, V. M., and B. W. Schafer. 2012. “Simulation of geometric imperfections in cold-formed steel members using spectral representation approach.” Thin-Walled Struct. 60 (Nov): 105–117. https://doi.org/10.1016/j.tws.2012.07.001.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 4, 2023
Accepted: Jul 3, 2023
Published online: Sep 5, 2023
Published in print: Nov 1, 2023
Discussion open until: Feb 5, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.