Local Buckling of Axially Compressed Welded H-Section Stub Columns Using Q420–Q960 Steel
Publication: Journal of Structural Engineering
Volume 149, Issue 9
Abstract
There is a lack of reliable research regarding the current engineering specifications considering the broad applications of high-strength steel (HSS) in civil engineering. Axial compression tests were performed on 12 HSS welded H-section stub columns using Q420–Q960 grade steels to study their local buckling behavior. In addition, we performed a parametric analysis using a finite-element model (FEM). Prior to the tests, the initial geometric imperfections and material properties of the specimens were measured to ensure that they satisfy the relevant engineering specifications. Twelve specimens exhibited typical local buckling. The axial deformation and axial strain were analyzed, and the utilization rate of the steel strength decreases with an increase in the yield strength and width–thickness ratio. Furthermore, a close relationship was observed between the occurrence of local buckling in the flange and the web. The results also indicate that the postbuckling strength of the axially compressed HSS welded H-section stub columns with slender sections cannot be ignored. The test results were used to verify the accuracy of the FEM, which considers the initial geometric imperfections and welding residual stress. For the Q420–Q960 steel welded H-section stub columns, parametric analysis was performed using the verified FEM to evaluate the limits of the width–thickness ratio and ultimate axially compressed bearing capacity. To apply current European, American, and Chinese codes, the modification factors for the width-thickness ratio limit and ultimate bearing capacity are given.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the Major project of National Natural Science Foundation of China (Grant No. 51890902), and the Fundamental Research Funds for the Central Universities (Grant No. 2022CDJKYJH006).
References
AISC. 2016. Specification for structural steel buildings. ANSI/AISC 360-16. Chicago: AISC.
Ban, H. Y., and G. Shi. 2018. “Overall buckling behaviour and design of high-strength steel welded section columns.” J. Constr. Steel Res. 143 (Apr): 180–195. https://doi.org/10.1016/j.jcsr.2017.12.026.
Ban, H. Y., G. Shi, and Y. J. Shi. 2013. “Experimental investigation of the overall buckling behaviour of 960 MPa high strength steel columns.” J. Constr. Steel Res. 88 (Sep): 256–266. https://doi.org/10.1016/j.jcsr.2013.05.015.
Ban, H. Y., G. Shi, and Y. J. Shi. 2014. “Experimental and unified model investigations on residual stress within high strength steel welded I-sections.” [In Chinese.] Eng. Mech. 31 (8): 83–91. https://doi.org/10.6052/j.issn.1000-4750.2012.12.0915.
Cao, X. L., G. Zhao, and Z. Y. Kong. 2020. “Experimental study on local buckling of 800 MPa HSS welded I-section columns under axial compression.” Thin-Walled Struct. 155 (Oct): 106878. https://doi.org/10.1016/j.tws.2020.106878.
CEN (European Committee for Standardization). 2006. Design of steel structures—Part 1–5: Plated structural elements. EN 1993-1-5. Brussels Belgium: CEN.
He, B. K. 1985. “Experimentally research on local buckling of axially compressed member.” [In Chinese.] J. XI’AN Uni. Archit. Tech. (Nat. Sci. Ed.) 1985 (1): 23–37. https://doi.org/10.15986/j.1006-7930.1985.01.002.
Hu, P. C., E. E. Lundquist, and S. B. Batdorf. 1946. Effect of small deviations from flatness on effective width and buckling of plates in compression. Washington, DC: Archive & Image Library.
MHURDPRC (Ministry of Housing and Urban-Rural Development of People’s Republic of China). 2001. Code for acceptance of construction quality of steel structures. [In Chinese.] GB 50205-2001. Beijing: MHURDPRC.
MHURDPRC (Ministry of Housing and Urban-Rural Development of People’s Republic of China). 2017. Code for design of steel structures. [In Chinese.] GB 50017-2017. Beijing: MHURDPRC.
MHURDPRC (Ministry of Housing and Urban-Rural Development of People’s Republic of China). 2020. Specifications for design of high strength steel structure. [In Chinese.] JGJ/T 483-2020. Beijing: MHURDPRC.
Rasmussen, K. J. R., and G. J. Hancock. 1992. “Plate slenderness limits for high strength steel section.” J. Constr. Steel Res. 23 (1–3): 73–96. https://doi.org/10.1016/0143-974X(92)90037-F.
SAMR (State Administration for Market Regulatory). 2009. High strength structural steel plates in the quenched and tempered condition. [In Chinese.] GB/T 16270-2009. Beijing: SAMR.
SAMR (State Administration for Market Regulatory). 2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. [In Chinese.] GB/T 228.1-2010. Beijing: SAMR.
SAMR (State Administration for Market Regulatory). 2018. High strength low alloy structural steels. [In Chinese.] GB/T 1591-2018. Beijing: SAMR.
Schillo, N., and M. Feldmann. 2015. “Local buckling behaviour of welded box sections made of high-strength steel.” Steel Constr. 8 (3): 179–186. https://doi.org/10.1002/stco.201510028.
Shi, G., C. C. Lin, and W. J. Zhou. 2014a. “Experimental study on local buckling of 960 MPa high strength steel columns under axial compression.” [In Chinese.] J. Build. Eng. 35 (1): 126–135. https://doi.org/10.14006/j.jzjgxb.2014.01.017.
Shi, G., K. L. Xu, and H. Y. Ban. 2016. “Local buckling behavior of welded stub columns with normal and high strength steels.” J. Constr. Steel Res. 119 (Aug): 144–153. https://doi.org/10.1016/j.jcsr.2015.12.020.
Shi, G., W. J. Zhou, and Y. Bai. 2014b. “Local buckling of 460 MPa high strength steel welded section stub columns under axial compression.” J. Constr. Steel Res. 100 (Mar): 60–70. https://doi.org/10.1016/j.jcsr.2014.04.027.
Sun, Y., Y. Liang, and O. Zhao. 2019. “Testing, numerical modelling and design of S690 high strength steel welded I-section stub columns.” J. Constr. Steel Res. 159 (Aug): 521–533. https://doi.org/10.1016/j.jcsr.2019.05.014.
Tillman, S. C., and A. F. Williams. 1989. “Buckling under compression of simple and multicell plate columns.” Thin-Walled Struct. 8 (2): 147–161. https://doi.org/10.1016/0263-8231(89)90040-2.
Wang, J., J. Di, and Q. Zhang. 2021. “Overall buckling behaviour of Q420–Q960 steel welded H-section axial compression members.” Eng. Struct. 249 (May): 113340. https://doi.org/10.1016/j.engstruct.2021.113340.
Yoo, J. H., J. W. Kim, and J. G. Yang. 2013. “Local buckling in the stub columns fabricated with HSA800 of high performance steel.” Int. J. Steel Struct. 13 (3): 445–458. https://doi.org/10.1007/s13296-013-3005-2.
Zhou, F., L. W. Tong, and Y. Y. Chen. 2013. “Experimental and numerical investigations of high strength steel welded h-section columns.” Int. J. Steel Struct. 13 (2): 209–218. https://doi.org/10.1007/s13296-013-2001-x.
Zou, Y., K. Yu, and J. L. Heng. 2023a. “Feasibility study of new GFRP grid web—Concrete composite beam.” Compos. Struct. 305 (Feb): 116527. https://doi.org/10.1016/j.compstruct.2022.116527.
Zou, Y., K. Zheng, and Z. Zhou. 2023b. “Experimental study on flexural behavior of hollow steel-UHPC composite bridge deck.” Eng. Struct. 274 (Jun): 115087. https://doi.org/10.1016/j.engstruct.2022.115087.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 28, 2022
Accepted: Mar 6, 2023
Published online: Jun 23, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.