Probabilistic Shear Strength Model of Reinforced Concrete Exterior Beam-Column Joints
Publication: Journal of Structural Engineering
Volume 149, Issue 5
Abstract
A major disadvantage of the existing joint shear strength models is that they cannot consider the shear-resistance mechanisms and various uncertainties comprehensively. In order to overcome this limitation, a probabilistic shear strength model of reinforced concrete (RC) exterior beam-column joints was proposed. A simplified deterministic shear strength model for RC exterior beam-column joints was derived first by considering the contributions of the diagonal strut mechanism and truss mechanism. Then the probabilistic shear strength model for RC exterior beam-column joints was developed by taking into account both aleatory and epistemic uncertainties. Furthermore, the posterior distributions of probabilistic model parameters were updated by means of the Bayesian theory and the Markov chain Monte Carlo method. Finally, the proposed model was verified by comparison with 135 sets of experimental data and existing shear strength models. The results show that the proposed model has satisfactory prediction accuracy and low dispersion, which not only calibrates the influencing parameters on the prediction accuracy of the existing models, but also provides a probabilistic method to calibrate the confidence interval of the existing models.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The financial support received from the National Natural Science Foundation of China (Grant Nos. 52278162, 62266005, and 51738004), the Guangxi Science Fund for Distinguished Young Scholars (2019GXNSFFA245004), and the Innovation Project of Guangxi Graduate Education (YCBZ2022011) is gratefully acknowledged.
References
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete and commentary. Farmington Hills, MI: ACI.
AIJ (Architectural Institute of Japan). 2010. Recommendation for limit state design of steel structures. Tokyo: Maruzen Publishing.
Attaalla, S. A. 2004. “General analytical model for nominal shear stress of type 2 normal- and high-strength concrete beam-column joints.” ACI Struct. J. 101 (1): 65–75. https://doi.org/10.14359/12999.
Attaalla, S. A. A. 1997. “Seismic shear capacity of beam-column joints in multistory reinforced concrete-frame buildings.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Southern California.
Bakir, P. G., and H. M. Boduroğlu. 2002. “A new design equation for predicting the joint shear strength of monotonically loaded exterior beam-column joints.” Eng. Struct. 24 (8): 1105–1117. https://doi.org/10.1016/S0141-0296(02)00038-X.
CEN (European Committee for Standardization). 2004. Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings. Brussels, Belgium: CEN.
Ding, Z. H., S. X. Zheng, and B. Yu. 2022. “Probabilistic prediction and calibration for residual shear strength of corroded reinforced concrete columns.” J. Build. Eng. 48 (Jun): 103901. https://doi.org/10.1016/j.jobe.2021.103901.
Fardis, M. N. 2020. “A levels-of-approximation approach to seismic design or assessment of beam-column joints in shear.” Struct. Concr. 22 (3): 1259–1284. https://doi.org/10.1002/suco.202000336.
fib (Fédération International du Béton). 2013. fib model code for concrete structures. Berlin: Wilhelm Ernst & Sohn.
Gao, X. L., D. Xiang, Y. L. He, and J. Li. 2020. “Shear deformation and force transfer of exterior beam-column joints.” ACI Struct. J. 117 (6): 253–267. https://doi.org/10.14359/51728074.
Haario, H., M. Laine, A. Mira, and E. Saksman. 2006. “DRAM: Efficient adaptive MCMC.” Stat. Comput. 16 (4): 339–354. https://doi.org/10.1007/s11222-006-9438-0.
Hwang, H. J., T. S. Eom, and H. G. Park. 2015. “Bond-slip relationship of beam flexural bars in interior beam-column joints.” ACI Struct. J. 112 (6): 827–837. https://doi.org/10.14359/51687708.
Hwang, H. J., and H. G. Park. 2019. “Requirements of shear strength and hoops for performance-based design of interior beam-column joints.” ACI Struct. J. 116 (2): 245–256. https://doi.org/10.14359/51713290.
Hwang, S. J., and H. J. Lee. 1999. “Analytical model for predicting shear strengths of exterior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J. 96 (5): 846–857. https://doi.org/10.14359/739.
Hwang, S. J., and H. J. Lee. 2000. “Analytical model for predicting shear strengths of interior reinforced concrete beam-column joints for seismic resistance.” ACI Struct. J. 97 (1): 35–44. https://doi.org/10.14359/831.
Hwang, S. J., R. J. Tsai, W. K. Lam, and J. P. Moehle. 2017. “Simplification of softened strut-and-tie model for strength prediction of discontinuity regions.” ACI Struct. J. 114 (5): 1239–1248. https://doi.org/10.14359/51689787.
Kassem, W. 2016. “Strut-and-tie modelling for the analysis and design of RC beam-column joints.” Mater. Struct. 49 (8): 3459–3476. https://doi.org/10.1617/s11527-015-0732-1.
Kim, J., J. M. Lafave, and J. Song. 2009. “Joint shear behaviour of reinforced concrete beam-column connections.” Mag. Concr. Res. 61 (2): 119–132. https://doi.org/10.1680/macr.2008.00068.
Lima, C., E. Martinelli, and C. Faella. 2012a. “Capacity models for shear strength of exterior joints in RC frames: Experimental assessment and recalibration.” Bull. Earthquake Eng. 10 (3): 985–1007. https://doi.org/10.1007/s10518-012-9342-2.
Lima, C., E. Martinelli, and C. Faella. 2012b. “Capacity models for shear strength of exterior joints in RC frames: State-of-the-art and synoptic examination.” Bull. Earthquake Eng. 10 (3): 967–983. https://doi.org/10.1007/s10518-012-9340-4.
Liu, T. X., Z. Wang, J. L. Zeng, and J. Q. Wang. 2021. “Machine-learning-based models to predict shear transfer strength of concrete joints.” Eng. Struct. 249 (Jun): 113253. https://doi.org/10.1016/j.engstruct.2021.113253.
Melchers, R. E., and A. T. Beck. 2018. Structural reliability analysis and prediction. New York: Wiley.
Ning, C. L., B. Yu, and B. Li. 2016. “Beam-column joint model for nonlinear analysis of non-seismically detailed reinforced concrete frame.” J. Earthquake Eng. 20 (3): 476–502. https://doi.org/10.1080/13632469.2015.1104759.
NZS (Standards New Zealand). 2006. Concrete structures standard—The design of concrete structures. NZS 3101-1. Wellington, NZ: NZS.
Ou, Y. C., H. A. Canseco, and D. P. Kurniawan. 2017. “Anchorage performance of headed deformed bars in exterior beam-column joints under cyclic loading.” KSCE J. Civ. Eng. 21 (Apr): 2837–2849. https://doi.org/10.1007/s12205-017-1868-z.
Parate, K., and R. Kumar. 2019. “Shear strength criteria for design of RC beam–column joints in building codes.” Bull. Earthquake Eng. 17 (3): 1407–1493. https://doi.org/10.1007/s10518-018-0492-8.
Park, R., and T. Paulay. 1975. Reinforced concrete structures. New York: Wiley.
Park, S. H., D. Yoon, S. Kim, and Z. W. Geem. 2021. “Deep neural network applied to joint shear strength for exterior RC beam-column joints affected by cyclic loadings.” Structures 33 (Apr): 1819–1832. https://doi.org/10.1016/j.istruc.2021.05.031.
Parra-Montesinos, G. J., and J. K. Wight. 2002. “Prediction of strength and shear distortion in R/C beam-column joints.” ACI Sym. Publ. 197 (13): 191–214. https://doi.org/10.14359/11934.
Paulay, T., and M. J. N. Priestley. 1992. Seismic design of reinforced concrete and masonry buildings. New York: Wiley.
Pauletta, M., D. Di Luca, and G. Russo. 2015. “Exterior beam column joints—Shear strength model and design formula.” Eng. Struct. 94 (Jul): 70–81. https://doi.org/10.1016/j.engstruct.2015.03.040.
Sarsam, K. F., and M. E. Phipps. 1985. “The shear design of in situ reinforced concrete beam-column joints subjected to monotonic loading.” Mag. Concr. Res. 37 (130): 16–28. https://doi.org/10.1680/macr.1985.37.130.16.
Tran, N., and B. Li. 2019. “Analytical model for shear-critical reinforced concrete interior beam-column joints.” J. Earthquake Eng. 24 (8): 1205–1221. https://doi.org/10.1080/13632469.2019.1572036.
Tran, T., M. N. S. Hadi, and T. M. Pham. 2014. “A new empirical model for shear strength of reinforced concrete beam–column connections.” Mag. Concr. Res. 66 (10): 514–530. https://doi.org/10.1680/macr.13.00310.
Wang, G. L., J. G. Dai, and J. G. Teng. 2012. “Shear strength model for RC beam–column joints under seismic loading.” Eng. Struct. 40 (Jul): 350–360. https://doi.org/10.1016/j.engstruct.2012.02.038.
Yu, B., C. H. Qin, B. X. Tao, and B. Li. 2021. “Probabilistic calibration of stress-strain models for confined normal-strength concrete.” J. Struct. Eng. 147 (8): 04021117. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003092.
Yu, B., B. J. Sang, X. L. Tao, and B. Li. 2022. “Re-evaluation of shear strength design code provisions of RC beams with shear reinforcements.” Eng. Struct. 256 (Apr): 114027. https://doi.org/10.1016/j.engstruct.2022.114027.
Zhang, L. D., and J. O. Jirsa. 1982. A study of shear behavior of reinforced concrete beam-column joints. Austin, TX: Univ. of Texas.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 9, 2022
Accepted: Dec 29, 2022
Published online: Feb 25, 2023
Published in print: May 1, 2023
Discussion open until: Jul 25, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.