Uniaxial Monotonic and Cyclic Compressive Stress–Strain Model for Concrete-Filled Thin-Walled Helical Corrugated Steel Tubes
Publication: Journal of Structural Engineering
Volume 149, Issue 6
Abstract
Concrete-filled thin-walled helical corrugated steel tubes (CFCST) are innovative composite members suitable for rehabilitating or reconstructing piers/columns under earthquake or long-term corrosion damage. The strength and ductility of the concrete can be effectively improved by the lateral confinement of the thin-walled corrugated steel tube (CST). However, for such a member, the previously proposed monotonic model is not applicable to large helical angles, and no existing cyclic model can be directly employed. Hence, some key indicators, including the nominal hoop stress, equivalent confining stress, peak stress, peak strain, plastic strain, and stress deterioration, are examined based on an enlarged experimental database and the working mechanism of CFCST. Subsequently, a systematic constitutive model with an updated monotonic stress–strain relationship and rational unloading/reloading rules was developed for the CST-confined concrete in this study. The accuracy of the proposed model was validated by the experimental results of both the monotonic and cyclic responses of CST-confined concrete specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data are available on request from the authors. Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research work was supported by the Outstanding Youth Science Foundation of Heilongjiang Province (JQ2021E003), the Natural Science Foundation of China (Grant No. 52078167), and the State Scholarship Fund of China Scholarship Council (CSC, Grant No. 202106120220). The financial support is gratefully acknowledged.
References
ACI (American Concrete Institute). 2011. Building code requirement for reinforced concrete. ACI 318-11. Farmington Hills, MI: ACI.
AISI (American Iron and Steel Institute). 1999. Modern sewer design. 4th ed. Washington, DC: AISI.
Al-Obaidi, A. R. 2019. “Investigation of fluid field analysis, characteristics of pressure drop and improvement of heat transfer in three-dimensional circular corrugated pipes.” J. Energy Storage 26 (Dec): 101012. https://doi.org/10.1016/j.est.2019.101012.
CEN (European Committee for Standardization). 2004. Design of concrete structures, part 1-1: General rules and rules for buildings. Eurocode 2. Brussels, Belgium: CEN.
Chai, Y. K. 2019. Experimental study on mechanical properties of short corrugated steel tube filled with rubberized concrete under axial load. [In Chinese.] Beijing: Beijing Jiaotong Univ.
Chen, Y., J. Dong, and T. Xu. 2018. “Composite box girder with corrugated steel webs and trusses—A new type of bridge structure.” Eng. Struct. 166 (Jul): 354–362. https://doi.org/10.1016/j.engstruct.2018.03.047.
China Standard Press. 2017. Cold-formed corrugated steel pipes. [In Chinese.] GB/T 34567-2017. Beijing: China Standard Press.
Chin, C. L., C. K. Ma, J. Y. Tan, C. B. Ong, A. Z. Awang, and W. Omar. 2019. “Review on development of external steel-confined concrete.” Constr. Build. Mater. 211 (Jun): 919–931. https://doi.org/10.1016/j.conbuildmat.2019.03.295.
CSPI (Corrugated Steel Pipe Institute). 2010. Handbook of steel drainage and highway construction products. 2nd ed. Kitchener, ON, Canada: CSPI.
Dayyani, I., A. D. Shaw, E. I. Saavedra Flores, and M. I. Friswell. 2015. “The mechanics of composite corrugated structures: A review with applications in morphing aircraft.” Compos. Struct. 133 (Dec): 358–380. https://doi.org/10.1016/j.compstruct.2015.07.099.
Dou, C., Z. Q. Jiang, Y. L. Pi, and Y. L. Guo. 2016. “Elastic shear buckling of sinusoidally corrugated steel plate shear wall.” Eng. Struct. 121 (Aug): 136–146. https://doi.org/10.1016/j.engstruct.2016.04.047.
Ead, S. A., N. Rajaratnam, C. Katopodis, and F. Ade. 2000. “Turbulent open-channel flow in circular corrugated culverts.” J. Hydraul. Eng. 126 (10): 750–757. https://doi.org/10.1061/(ASCE)0733-9429(2000)126:10(750).
Emami, F., M. Mofid, and A. Vafai. 2013. “Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls.” Eng. Struct. 48 (Mar): 750–762. https://doi.org/10.1016/j.engstruct.2012.11.028.
Fang, Y., C. Liu, H. Yang, and L. Yang. 2020. “Axial behaviour of concrete-filled corrugated steel tubular column embedded with structural steel.” J. Constr. Steel Res. 170 (Jul): 106064. https://doi.org/10.1016/j.jcsr.2020.106064.
Fang, Y., Y. Wang, H. Yang, and X. Lin. 2022. “Experimental behavior of concrete-filled thin-walled corrugated steel tubes with large helical angles under monotonic and cyclic axial compression.” Thin-Walled Struct. 173 (Dec): 109043. https://doi.org/10.1016/j.tws.2022.109043.
Fang, Y., Y. Wang, B. Zhang, and J. Dong. 2021. “Behaviour of concrete-filled thin-walled corrugated steel tubes under cyclic axial compression.” Thin-Walled Struct. 162 (May): 107630. https://doi.org/10.1016/j.tws.2021.107630.
Han, L. H. 2016. Concrete filled steel tubular structure, theory and practice. 3rd ed. Beijing: Science Press.
Ho, J. C. M., X. L. Ou, M. T. Chen, Q. Wang, and M. H. Lai. 2020. “A path dependent constitutive model for CFFT column.” Eng. Struct. 210 (May): 110367. https://doi.org/10.1016/j.engstruct.2020.110367.
Lai, M. H., Y. W. Liang, Q. Wang, F. M. Ren, M. T. Chen, and J. C. M. Ho. 2020a. “A stress-path dependent stress-strain model for FRP-confined concrete.” Eng. Struct. 203 (Jun): 109824. https://doi.org/10.1016/j.engstruct.2019.109824.
Lai, M. H., W. Song, X. L. Ou, M. T. Chen, Q. Wang, and J. C. M. Ho. 2020b. “A path dependent stress-strain model for concrete-filled-steel-tube column.” Eng. Struct. 211 (May): 110312. https://doi.org/10.1016/j.engstruct.2020.110312.
Lam, L., and J. G. Teng. 2009. “Stress–strain model for FRP-confined concrete under cyclic axial compression.” Eng. Struct. 31 (2): 308–321. https://doi.org/10.1016/j.engstruct.2008.08.014.
Lam, L., J. G. Teng, C. H. Cheung, and Y. Xiao. 2006. “FRP-confined concrete under axial cyclic compression.” Cem. Concr. Compos. 28 (10): 949–958. https://doi.org/10.1016/j.cemconcomp.2006.07.007.
Leblouba, M., M. T. Junaid, S. Barakat, S. Altoubat, and M. Maalej. 2017. “Shear buckling and stress distribution in trapezoidal web corrugated steel beams.” Thin-Walled Struct. 113 (Feb): 13–26. https://doi.org/10.1016/j.tws.2017.01.002.
Liu, J., Y. Teng, Y. Zhang, X. Wang, and Y. F. Chen. 2018. “Axial stress-strain behavior of high-strength concrete confined by circular thin-walled steel tubes.” Constr. Build. Mater. 177 (Jul): 366–377. https://doi.org/10.1016/j.conbuildmat.2018.05.021.
Liu, J., X. Wang, and S. Zhang. 2015. “Behavior of square tubed reinforced-concrete short columns subjected to eccentric compression.” Thin-Walled Struct. 91 (Jun): 108–115. https://doi.org/10.1016/j.tws.2015.01.023.
Mai, V. T., I. D. Moore, and N. A. Hoult. 2021. “Laboratory investigation of the structural performance of a corrugated steel culvert under increasing cover depth.” J. Bridge Eng. 26 (6): 04021029. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001722.
Mander, J. B., M. J. N. Priestley, and R. Park. 1988. “Observed stress-strain behavior of confined concrete.” J. Struct. Eng. 114 (8): 1827–1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827).
NCSPA (National Corrugated Steel Pipe Association). 2008. Corrugated steel pipe design manual. 2nd ed. Washington, DC: NCSPA.
Persson, D., D. Thierry, and O. Karlsson. 2017. “Corrosion and corrosion products of hot dipped galvanized steel during long term atmospheric exposure at different sites world-wide.” Corros. Sci. 126 (Aug): 152–165. https://doi.org/10.1016/j.corsci.2017.06.025.
Popovics, S. 1973. “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res. 3 (5): 583–599. https://doi.org/10.1016/0008-8846(73)90096-3.
Rajavel, B., and M. G. Prasad. 2013. “Acoustics of corrugated pipes: A review.” Appl. Mech. Rev. 65 (5): 050801. https://doi.org/10.1115/1.4025302.
San Ha, N., and G. Lu. 2020. “Thin-walled corrugated structures: A review of crashworthiness designs and energy absorption characteristics.” Thin-Walled Struct. 157 (Dec): 106995. https://doi.org/10.1016/j.tws.2020.106995.
Su, R., X. Li, T. Zhong, and T. Zhou. 2021. “Axial behavior of novel CFDST columns with outer welded corrugated steel tubes.” In Vol. 34 of Structures, 2708–2720. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/j.istruc.2021.09.039.
Tao, Z., L. H. Han, and X. L. Zhao. 2004. “Behaviour of concrete-filled double skin (CHS inner and CHS outer) steel tubular stub columns and beam-columns.” J. Constr. Steel Res. 60 (8): 1129–1158. https://doi.org/10.1016/j.jcsr.2003.11.008.
Wang, Y., J. Chen, and Y. Geng. 2015. “Testing and analysis of axially loaded normal-strength recycled aggregate concrete filled steel tubular stub columns.” Eng. Struct. 86 (Mar): 192–212. https://doi.org/10.1016/j.engstruct.2015.01.007.
Wang, Y., L. Yang, H. Yang, and C. Liu. 2019. “Behaviour of concrete-filled corrugated steel tubes under axial compression.” Eng. Struct. 183 (Mar): 475–495. https://doi.org/10.1016/j.engstruct.2018.12.093.
Wang, Z., D. Wang, S. T. Smith, and D. Lu. 2012a. “CFRP-confined square RC columns. II: Cyclic axial compression stress-strain model.” J. Compos. Constr. 16 (2): 161–170. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000246.
Wang, Z., D. Wang, S. T. Smith, and D. Lu. 2012b. “Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression.” Eng. Struct. 40 (Jul): 64–74. https://doi.org/10.1016/j.engstruct.2012.01.004.
Yang, L., Y. Wang, M. Elchalakani, and Y. Fang. 2020. “Experimental behavior of concrete-filled corrugated steel tubular short columns under eccentric compression and non-uniform confinement.” Eng. Struct. 220 (Oct): 111009. https://doi.org/10.1016/j.engstruct.2020.111009.
Yang, L., Y. Wang, and J. Y. R. Liew. 2021. “Compression-bending strength model for corrugated steel tube confined reinforced concrete section.” J. Struct. Eng. 147 (11): 04021187. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003148.
Yankelevsky, D. Z., and H. W. Reinhardt. 1987. “Model for cyclic compressive behavior of concrete.” J. Struct. Eng. 113 (2): 228–240. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:2(228).
Yu, T., B. Zhang, and J. G. Teng. 2015. “Unified cyclic stress–strain model for normal and high strength concrete confined with FRP.” Eng. Struct. 102 (Nov): 189–201. https://doi.org/10.1016/j.engstruct.2015.08.014.
Yue, F., B. Liu, B. Zhu, X. Jiang, L. Chen, and K. Liao. 2021. “Shaking table test and numerical simulation on seismic performance of prefabricated corrugated steel utility tunnels on liquefiable ground.” Soil Dyn. Earthquake Eng. 141 (Jan): 106527. https://doi.org/10.1016/j.soildyn.2020.106527.
Zhang, B., T. Yu, and J. G. Teng. 2015. “Behavior of concrete-filled FRP tubes under cyclic axial compression.” J. Compos. Constr. 19 (3): 04014060. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000523.
Zhang, B., T. Yu, and J. G. Teng. 2021. “Behavior and modelling of FRP-concrete-steel hybrid double-skin tubular columns under repeated unloading/reloading cycles.” Compos. Struct. 258 (Feb): 113393. https://doi.org/10.1016/j.compstruct.2020.113393.
Zhang, S., L. Guo, Z. Ye, and Y. Wang. 2005. “Behavior of steel tube and confined high strength concrete for concrete-filled RHS tubes.” Adv. Struct. Eng. 8 (2): 101–116. https://doi.org/10.1260/1369433054037976.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 2, 2022
Accepted: Nov 18, 2022
Published online: Mar 23, 2023
Published in print: Jun 1, 2023
Discussion open until: Aug 23, 2023
ASCE Technical Topics:
- Business management
- Columns
- Compression members
- Concrete
- Engineering fundamentals
- Engineering materials (by type)
- Innovation
- Material mechanics
- Materials engineering
- Model accuracy
- Models (by type)
- Practice and Profession
- Steel columns
- Strain
- Stress (by type)
- Stress strain relations
- Structural analysis
- Structural engineering
- Structural members
- Structural systems
- Tubes (structure)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.