Numerical Modeling and Optimization of the Geometric Properties Influencing the Deflection Behavior of Interlocking Concrete Block Pavement
Publication: Journal of Transportation Engineering, Part B: Pavements
Volume 148, Issue 3
Abstract
Interlocking Concrete Block Pavement (ICBP) is a pavement type consisting of a discrete wearing layer with a unique load transfer mechanism. The main objective of the present study was to understand the influence of geometric properties of Interlocking paver block (IPB) on the deflection behavior of ICBP. The geometric parameters considered in the study include the block laying pattern, laying angle, laying thickness, and laying shape. Plate load tests were used to evaluate the deflection of the ICBP, and numerical modeling was carried out using PLAXIS Software. The PLAXIS software was validated using experimental and case study deflection test results. The optimization and significance of the geometric parameters were analyzed using Design Expert software. The test result showed that less deflection was experienced for the ICBP when laid in a herringbone pattern, 90° angle, 80–100-mm thickness, and zigzag shape.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or code that support the findings of this study are available from the corresponding author on reasonable request (laboratory test calculations, PLAXIS model, optimization process, optimization model).
References
Algin, H. M. 2007. “Interlock mechanism of concrete block pavements.” J. Transp. Eng. 133 (5): 318–326. https://doi.org/10.1061/(ASCE)0733-947X(2007)133:5(318).
ASTM. 1993. Standard test method for nonrepetitive static plate load tests of soils and flexible pavement components, for use in evaluation and design of airport and highway pavements. ASTM D1196. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 1970. Classification and identification of soils for general engineering purposes. IS 1498. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2006. Precast concrete blocks for paving—Specification. IS 15658. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2016. Coarse and fine aggregate for concrete—Specification. IS 383. New Delhi, India: BIS.
Festa, B., P. Giannattasio, and M. Pernetti. 1996. “Evaluation of some factors influence on the interlocking paving system performance.” In Proc., 5th Int. Conf. on Concrete Block Paving. Tel-Aviv, Israel: Small Element Pavement Technologists.
Gunatilake, D., and W. K. Mampearachchi. 2019. “Finite element modelling approach to determine optimum dimensions for interlocking concrete blocks used for road paving.” Road Mater. Pavement Des. 20 (2): 280–296. https://doi.org/10.1080/14680629.2017.1385512.
Hassani, A., and A. Jamshidi. 2006. “Modeling and structural design of a concrete block pavement system.” In Proc., Eighth International Workshop on Concrete Block Paving, 389–398. San Francisco: Small Element Pavement Technologists.
IRC (Indian Road Congress). 2002. Rural roads manual. IRC SP 20. New Delhi, India: IRC.
IRC (Indian Road Congress). 2018a. Guidelines for the design of flexible pavements. IRC 37. New Delhi, India: IRC.
IRC (Indian Road Congress). 2018b. Guidelines for the use of interlocking concrete block pavement. IRC:SP:63. New Delhi, India: IRC.
Jamshidi, A., K. Kurumisawa, G. White, T. Nishizawa, T. Igarashi, T. Nawa, and J. Mao. 2019. “State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement.” Constr. Build. Mater. 200 (Mar): 713–755. https://doi.org/10.1016/j.conbuildmat.2018.11.286.
Knapton, J., and H. M. Algin. 1998. “Research into the structural performance of interlocking pavements.” In Proc., 3rd Int. Workshop on Concrete Block Paving, 1–11. San Francisco: Small Element Pavement Technologists.
Lin, W., D. Kim, S. W. Ryu, H. Hao, Y. E. Ge, and Y. H. Cho. 2018. “Evaluation of the load dissipation behavior of concrete block pavements with various block shapes and construction patterns.” J. Mater. Civ. Eng. 30 (2): 04017291. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002113.
Lozovyi, S., and E. Zahoruiko. 2012. “Plaxis simulation of static pile tests and determination of reaction piles influence.” Sci. Tech. J. New Technol. Constr. 1 (2): 68–73.
Mampearachchi, W. K., and W. P. H. Gunarathna. 2010. “Finite-element model approach to determine support conditions and effective layout for concrete block paving.” J. Mater. Civ. Eng. 22 (11): 1139–1147. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000118.
Mampearachchi, W. K., and A. Senadeera. 2014. “Determination of the most effective cement concrete block laying pattern and shape for road pavement based on field performance.” J. Mater. Civ. Eng. 26 (2): 226–232. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000801.
Mascio, P. D., L. Moretti, and A. Capannolo. 2019. “Concrete block pavements in urban and local roads: Analysis of stress-strain condition and proposal for a catalogue.” J Trafffic Transp. Eng. 6 (6): 557–566.
Mokhtari, M., and B. Kalantari. 2019. “Behavior of stone columns based on plate load test and FEM analysis on the north end of Persian gulf.” Electron. J. Geotech. Eng. 24 (5): 1317–1326.
Naeini, S. A., and E. Taherabadi. 2015. “Numerical and theoretical study of plate load test to define coefficient of subgrade reaction.” J. Geotech. Transp. Eng. 1 (2): 38–42.
Nejad, F. M., and M. R. Shadravan. 2006. “A study on behavior of block pavement using 3d finite element method.” In Proc., 8th Int. Workshop on Concrete Block Paving, 349–358. San Francisco: Small Element Pavement Technologists.
Panda, B. C., and A. K. Ghosh. 2001. “Source of joining sand for concrete block pavement.” J. Mater. Civ. Eng. 13 (3): 235–237. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:3(235).
Panda, B. C., and A. K. Ghosh. 2002. “Structural behavior of concrete block paving. II: Concrete blocks.” J. Transp. Eng. 128 (2): 130–135. https://doi.org/10.1061/(ASCE)0733-947X(2002)128:2(130).
Shackel, B. 1984. “The evolution and application of mechanistic design procedures for concrete block pavements.” In Proc., Int. Workshop on Concrete Block Paving, 114–120. San Francisco: Small Element Pavement Technologists.
Shackel, B., and D. O. O. Lim. 2003. “Mechanisms of paver interlock.” In Proc., 7th Int. Workshop on Concrete Block Paving. San Francisco: Small Element Pavement Technologists.
Soutsos, M. N., T. Kangkang, A. K. Hussain, and S. G. Millard. 2011. “The effect of construction pattern and unit interlock on the structural behaviour of block pavements.” Constr. Build. Mater. 25 (10): 3832–3840. https://doi.org/10.1016/j.conbuildmat.2011.04.002.
Tawfik, M. M., and Y. M. El-Mossallamy. 2015. “Application of the finite element method for investigating the dynamic plate loading test.” Ain Shams Eng. J. 8 (1): 39–49. https://doi.org/10.1016/j.asej.2015.08.011.
Wellner, F., and T. Gleitz. 1996. “Dynamic load bearing tests on block pavements.” In Proc., 5th Int. Concrete Block Paving Conf., 317–327. San Francisco: Small Element Pavement Technologists.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 25, 2021
Accepted: Jan 5, 2022
Published online: Apr 27, 2022
Published in print: Sep 1, 2022
Discussion open until: Sep 27, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Wentao Wang, Linbing Wang, Review on Design, Characterization, and Prediction of Performance for Asphalt Materials and Asphalt Pavement Using Multi-Scale Numerical Simulation, Materials, 10.3390/ma17040778, 17, 4, (778), (2024).
- A. Jegan Bharath Kumar, V. Sunitha, R. T. Arjun Siva Rathan, P. Murshida, Samson Mathew, Influence of moisture and compaction effect on volumetric and mechanical properties of bituminous mix, International Journal of Pavement Engineering, 10.1080/10298436.2022.2144312, 24, 2, (2022).