Safety Monitoring and Effect Evaluation of Variable Cross-Section Continuous Box-Girder Bridges Strengthened with External Prestressing
Publication: Journal of Performance of Constructed Facilities
Volume 37, Issue 2
Abstract
External prestressing technology has been widely applied to mitigate the cracking and deflection of variable cross-section continuous box-girder bridges. However, it remains a challenging task to establish a reliable safety monitoring and evaluation method in engineering applications. This paper takes a practical project as the research background and installs a sensing monitoring system on a bridge before strengthening. The evolutions of the strain at the characteristic sections, crack width, and deflection of bridges before and after strengthening were compared and analyzed. The construction process’s safety and strengthening measures’ effectiveness were monitored and evaluated. According to the construction process monitoring, the prestress tensioning process did not bring torsion to the bridge, and the strain at each monitoring point was within safe boundaries. After strengthening, the bridge appeared to camber with a value of . The typical cracks were mitigated to different extents, and the closure degree of the crack width was . The strain distribution of the bridge was more stable after strengthening, and the frequency of large strain was significantly reduced, which reflected the improvement of section stiffness. The study can provide meaningful references for the optimization design and strengthening strategies of similar projects.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully appreciate the financial support of the National Natural Science Foundation of China (52078122).
References
Atta, A., and M. Taman. 2016. “Innovative method for strengthening dapped-end beams using an external prestressing technique.” Mater. Struct. 49 (8): 3005–3019. https://doi.org/10.1617/s11527-015-0701-8.
Chen, Z., and S. Zhang. 2018. “EM-based monitoring and probabilistic analysis of prestress loss of bonded tendons in PSC beams.” Adv. Civ. Eng. 2018: 1–9. https://doi.org/10.1155/2018/4064362.
Gallego, J. M., C. Czaderski, and M. Breveglieri. 2018. “Fatigue behaviour at elevated temperature of RC slabs strengthened with EB CFRP strips.” Composites, Part. B 141 (May): 37–49. https://doi.org/10.1016/j.compositesb.2017.12.026.
Gallego, J. M., J. Michels, and C. Czaderski. 2017. “Influence of the asphalt pavement on the short-term static strength and long-term behaviour of RC slabs strengthened with externally bonded CFRP strips.” Eng. Struct. 150 (Nov): 481–496. https://doi.org/10.1016/j.engstruct.2017.07.063.
Gao, D., D. Fang, P. You, G. Chen, and J. W. Tang. 2020. “Flexural behavior of reinforced concrete one-way slabs strengthened via external post-tensioned FRP tendons.” Eng. Struct. 216 (Aug): 110718. https://doi.org/10.1016/j.engstruct.2020.110718.
Ghallab, A., and A. W. Beeby. 2005. “Factors affecting the external prestressing stress in externally strengthened prestressed concrete beams.” Cem. Concr. Compos. 27 (9–10): 945–957. https://doi.org/10.1016/j.cemconcomp.2005.05.003.
Guo, T., Z. Chen, and T. Liu. 2016. “Time-dependent reliability of strengthened PSC box-girder bridge using phased and incremental static analyses.” Eng. Struct. 117 (Jun): 358–371. https://doi.org/10.1016/j.engstruct.2016.03.011.
Herbrand, M., and M. Classen. 2015. “Shear tests on continuous prestressed concrete beams with external prestressing.” Struct. Concr. 16 (3): 428–437. https://doi.org/10.1002/suco.201400082.
Huang, H., and Z. Wu. 2018. “Monitoring and structural analysis of a rehabilitated box girder bridge based on long-gauge strain sensors.” Struct. Health Monit. 17 (3): 586–597. https://doi.org/10.1177/1475921717707357.
Hussein, H. H., S. M. Sargand, F. T. Al Rikabi, and E. P. Steinberg. 2017. “Laboratory evaluation of ultrahigh-performance concrete shear key for prestressed adjacent precast concrete box girder bridges.” J. Bridge Eng. 22 (2): 04016113. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000987.
Hussein, H. H., S. M. Sargand, and I. Khoury. 2019. “Field investigation of ultra-high performance concrete shear key in an adjacent box-girder bridge.” Struct. Infrastruct. Eng. 15 (5): 663–678. https://doi.org/10.1080/15732479.2019.1569698.
Kambal, M. E. M., and Y. Jia. 2018. “Theoretical and experimental study on flexural behavior of prestressed steel plate girders.” J. Constr. Steel Res. 142 (Mar): 5–16. https://doi.org/10.1016/j.jcsr.2017.12.007.
Kasan, J. L., K. A. Harries, and R. Miller. 2014. “Limits of application of externally bonded CFRP repairs for impact-damaged prestressed concrete girders.” J. Compos. Constr. 18 (3): A4013013. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000347.
Kim, J., W. Chung, and J. H. J. Kim. 2008. “Experimental investigation on behavior of a spliced PSC girder with precast box segments.” Eng. Struct. 30 (11): 3295–3304. https://doi.org/10.1016/j.engstruct.2008.04.029.
Li, S., and Z. Wu. 2007. “Development of distributed long-gage fiber optic sensing system for structural health monitoring.” Struct. Health Monit. 6 (2): 133–143. https://doi.org/10.1177/1475921706072078.
Li, X., G. Wu, M. S. Popal, and J. Jiang. 2018. “Experimental and numerical study of hollow core slabs strengthened with mounted steel bars and prestressed steel wire ropes.” Constr. Build. Mater. 188 (Nov): 456–469. https://doi.org/10.1016/j.conbuildmat.2018.08.073.
Madaj, A., and K. Mossor. 2019. “Evaluation of external prestressing as a strengthening method for existing concrete bridges.” Struct. Eng. Int. 29 (3): 412–416. https://doi.org/10.1080/10168664.2019.1593795.
Miyamoto, A., K. Tei, H. Nakamura, and J. W. Blue. 2000. “Behavior of prestressed beam strengthened with external tendons.” J. Struct. Eng. 126 (9): 1033–1044. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1033).
Naser, A. F., and Z. Wang. 2012. “Experimental monitoring of the strengthening construction of a segmental box girder bridge and field testing of external prestressing tendons anchorage.” Front. Struct. Civ. Eng. 6 (3): 308–320. https://doi.org/10.1007/s11709-012-0140-3.
Oh, B. H., and I. H. Yang. 2000. “Sensitivity analysis of time-dependent behavior in PSC box girder bridges.” J. Struct. Eng. 126 (2): 171–179. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(171).
Park, Y. H., C. Park, and Y. G. Park. 2005. “The behavior of an in-service plate girder bridge strengthened with external prestressing tendons.” Eng. Struct. 27 (3): 379–386. https://doi.org/10.1016/j.engstruct.2004.10.014.
Rai, D. C., S. Komaraneni, and T. Pradhan. 2013. “Strengthening of slab action in transverse direction of damaged deck of prestressed box girder bridge.” J. Bridge Eng. 18 (1): 65–75. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000318.
Ruan, X., H. Ma, and X. Shi. 2015. “Fatigue life evaluation for cracked long-span continuous PC bridges.” Adv. Steel Constr. 11 (3): 383–394. https://doi.org/10.18057/IJASC.2015.11.3.11.
Teigen, J. G. 2018. “Prestressed box girder bridge strengthened by an internal tubular arch.” J. Bridge Eng. 23 (4): 04018005. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001212.
Wang, Q., W. Qiu, and S. Xu. 2015a. “Structural optimization of steel cantilever used in concrete box girder bridge widening.” Math. Probl. Eng 2015: 1–14. https://doi.org/10.1155/2015/105024.
Wang, X., J. Z. Shi, G. Wu, L. Yang, and Z. S. Wu. 2015b. “Effectiveness of basalt FRP tendons for strengthening of RC beams through the external prestressing technique.” Eng. Struct. 101 (Oct): 34–44. https://doi.org/10.1016/j.engstruct.2015.06.052.
Xue, W., Y. Tan, and F. Peng. 2020. “Experimental study on damaged prestressed concrete beams using external post-tensioned tendons.” ACI Struct. J. 117 (1): 159–168. https://doi.org/10.14359/51718019.
Yang, J., P. Hou, C. Q. Yang, and N. Yang. 2021. “Study of a long-gauge FBG strain sensor with enhanced sensitivity and its application in structural monitoring.” Sensors 21 (10): 3492. https://doi.org/10.3390/s21103492.
Zhang, N., and C. C. Fu. 2009. “Experimental and theoretical studies on composite steel-concrete box beams with external tendons.” Eng. Struct. 31 (2): 275–283. https://doi.org/10.1016/j.engstruct.2008.08.004.
Zhang, X., S. Li, and W. Zhang. 2020. “Second remediation of long-term deflection and cracking of PT box-girder bridge using external post-tensioning.” J. Perform. Constr. Facil. 34 (5): 04020090. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001491.
Zhang, Y., D. Xu, and C. Liu. 2018. “Behavior and stress check of concrete box girders strengthened by external prestressing.” Comput. Concr. 22 (2): 133–142. https://doi.org/10.12989/cac.2018.22.2.133.
Zhao, H., and B. Andrawes. 2020. “Local strengthening and repair of concrete bridge girders using shape memory alloy precast prestressing plate.” J. Intell. Mater. Syst. Struct. 31 (11): 1343–1357. https://doi.org/10.1177/1045389X20916793.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 4, 2022
Accepted: Oct 27, 2022
Published online: Dec 24, 2022
Published in print: Apr 1, 2023
Discussion open until: May 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.