Residual Deformation-Based Performance Evaluation Method for CFST Piers Subjected to Vehicle Collision
Publication: Journal of Performance of Constructed Facilities
Volume 37, Issue 2
Abstract
Concrete-filled steel tubular (CFST) piers have been applied in bridge structures due to their high bearing capacity, good ductility, and light weight. During their service life, CFST piers may suffer vehicle collision. Nevertheless, there is still a lack of a performance evaluation method for CFST piers subjected to vehicle impact. Therefore, this paper presents a residual deformation-based method to evaluate the performance of CFST piers under truck impact. Before that, a numerical model was developed to simulate responses of CFST piers under truck collision and validated by reported impact tests. Then, the performance levels of 6- and 12-m high CFST piers under 20 and 40 ton and 60, 100, and truck collisions were numerically investigated. Afterwards, a residual deformation-based performance evaluation method was proposed based on the numerical investigations. In this method, the ratio of the residual lateral deflection at the mid-height to half of the pier height was first selected as the evaluation index. Then, threshold values of the evaluation index at different performance levels were determined. Finally, an analytical model for the evaluation index was developed. Comparisons indicate that the analytical performance levels are in good agreement with the numerical results. The proposed residual deformation-based performance evaluation method can be used for design and accident analysis of CFST piers subjected to truck collision.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China under Grant No. 51408175.
References
Abdelkarim, O. I., and M. A. ElGawady. 2017. “Performance of bridge piers under vehicle collision.” Eng. Struct. 140 (Jun): 337–352. https://doi.org/10.1016/j.engstruct.2017.02.054.
Bruneau, M., and J. Marson. 2004. “Seismic design of concrete-filled circular steel bridge piers.” J. Bridge Eng. 9 (1): 24–34. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:1(24).
Buth, C. E., W. F. Williams, M. S. Brackin, D. Lord, S. R. Geedipally, and A. Y. Abu-Odeh. 2010. Analysis of large truck collisions with bridge piers: Phase 1. Report of guidelines for designing bridge piers and abutments for vehicle collisions. College Station, TX: TX Transportation Institute.
CEN (European Committee for Standardization). 2005a. Eurocode 2: Design of concrete structures—Part 2: Concrete bridges—Design and detailing rules. BS EN 1992-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Eurocode 4: Design of composite steel and concrete structures—Part 2: General rules and rules for bridges. BS EN 1994-2. Brussels, Belgium: CEN.
Chen, L., Y. Hu, H. Ren, H. Xiang, C. Zhai, and Q. Fang. 2019. “Performances of the RC column under close-in explosion induced by the double-end-initiation explosive cylinder.” Int. J. Impact Eng. 132 (Oct): 103326. https://doi.org/10.1016/j.ijimpeng.2019.103326.
Cui, J., Y. Shi, Z. X. Li, and L. Chen. 2015. “Failure analysis and damage assessment of RC columns under close-in explosions.” J. Perform. Constr. Facil. 29 (5): B4015003. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000766.
Do, T. V., T. M. Pham, and H. Hao. 2018. “Dynamic responses and failure modes of bridge columns under vehicle collision.” Eng. Struct. 156 (Feb): 243–259. https://doi.org/10.1016/j.engstruct.2017.11.053.
Do, T. V., T. M. Pham, and H. Hao. 2019. “Impact force profile and failure classification of reinforced concrete bridge columns against vehicle impact.” Eng. Struct. 183 (Mar): 443–458. https://doi.org/10.1016/j.engstruct.2019.01.040.
El-Tawil, S., E. Severino, and P. Fonseca. 2005. “Vehicle collision with bridge piers.” J. Bridge Eng. 10 (3): 345–353. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(345).
Fang, C., T. Y. Yosef, D. G. Linzell, and J. D. Rasmussen. 2021. “Residual axial capacity estimates for bridge columns subjected to combined vehicle collision and air blast.” J. Bridge Eng. 26 (7): 04021035. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001735.
fib (Fédération Internationale du Bétons). 2013. Model code for concrete structures 2010. fib Model Code 2010. Lausanne, Switzerland: fib.
Fouché, P., M. Bruneau, and V. Chiarito. 2017. “Dual-hazard blast and seismic behavior of concrete-filled double-skin steel tubes bridge pier.” J. Struct. Eng. 143 (12): 04017155. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001883.
Hu, B., and Y. Y. Liu. 2022. “Vehicular collision performance evaluation of concrete-filled steel tubular piers designed according to current codes in the US, Europe, and China.” J. Bridge Eng. 27 (6): 04022038. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001889.
Li, M., Z. Zong, H. Hao, X. Zhang, J. Lin, and Y. Liao. 2020. “Post-blast performance and residual capacity of CFDST columns subjected to contact explosions.” J. Constr. Steel Res. 167 (Apr): 105960. https://doi.org/10.1016/j.jcsr.2020.105960.
Livermore Software Technology Corporation. 2020. LS-DYNA R12 keyword user’s manual. Livermore, CA: Livermore Software Technology Corporation.
Li, Z. X., X. Zhang, Y. Shi, C. Wu, and J. Li. 2021. “Predication of the residual axial load capacity of CFRP-strengthened RC column subjected to blast loading using artificial neural network.” Eng. Struct. 242 (Sep): 112519. https://doi.org/10.1016/j.engstruct.2021.112519.
Momeni, M., M. A. Hadianfard, C. Bedon, and A. Baghlani. 2020. “Damage evaluation of H-section steel columns under impulsive blast loads via gene expression programming.” Eng. Struct. 219 (Sep): 110909. https://doi.org/10.1016/j.engstruct.2020.110909.
NCAC (FHWA/NHTSA National Crash Analysis Center). 2011. “Finite element model archive.” Accessed December 1, 2012. https://www.ncac.gwu.edu/vml/models.html.
Saini, D., and B. Shafei. 2019. “Performance of concrete-filled steel tube bridge columns subjected to vehicle collision.” J. Bridge Eng. 24 (8): 04019074. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001439.
SA (Standards Australia). 2017. Bridge design Part 6: Steel and composite construction. AS/NZS 5100.6:2017. Sydney, Australia: SA.
Shi, Y., H. Hao, and Z. X. Li. 2008. “Numerical derivation of pressure–impulse diagrams for prediction of RC column damage to blast loads.” Int. J. Impact Eng. 35 (11): 1213–1227. https://doi.org/10.1016/j.ijimpeng.2007.09.001.
Stephens, M. T., D. E. Lehman, and C. W. Roeder. 2016. “Design of CFST column-to-foundation/cap beam connections for moderate and high seismic regions.” Eng. Struct. 122 (Sep): 323–337. https://doi.org/10.1016/j.engstruct.2016.05.023.
US DOD (US Department of Defense). 2008. Structures to resist the effects of accidental explosions. UFC 3-340-02. Washington, DC: US DOD.
Wang, H., C. Wu, F. Zhang, Q. Fang, H. Xiang, P. Li, Z. Li, Y. Zhou, Y. Zhang, and J. Li. 2017. “Experimental study of large-sized concrete filled steel tube columns under blast load.” Constr. Build. Mater. 134 (Mar): 131–141. https://doi.org/10.1016/j.conbuildmat.2016.12.096.
Wang, R., L. H. Han, and C. C. Hou. 2013. “Behavior of concrete filled steel tubular (CFST) members under lateral impact: Experiment and FEA model.” J. Constr. Steel Res. 80 (Jan): 188–201. https://doi.org/10.1016/j.jcsr.2012.09.003.
Wang, W., C. Wu, J. Li, Z. Liu, and Y. Lv. 2019. “Behavior of ultra-high performance fiber-reinforced concrete (UHPFRC) filled steel tubular members under lateral impact loading.” Int. J. Impact Eng. 132 (Oct): 103314. https://doi.org/10.1016/j.ijimpeng.2019.103314.
Wang, Z. G., H. Wu, Q. Fang, and J. Wu. 2020. “Numerical study on the residual axial capacity of ultra high performance cementitious composite filled steel tube (UHPCC-FST) column under contact explosion.” Thin-Walled Struct. 153 (Aug): 106832. https://doi.org/10.1016/j.tws.2020.106832.
Wu, K. C., B. Li, and K. C. Tsai. 2011. “Residual axial compression capacity of localized blast-damaged RC columns.” Int. J. Impact Eng. 38 (1): 29–40. https://doi.org/10.1016/j.ijimpeng.2010.09.002.
Wu, M., L. Jin, and X. Du. 2020. “Dynamic responses and reliability analysis of bridge double-column under vehicle collision.” Eng. Struct. 221 (Oct): 111035. https://doi.org/10.1016/j.engstruct.2020.111035.
Yuan, H., J. Dang, and T. Aoki. 2013. “Experimental study of the seismic behavior of partially concrete-filled steel bridge piers under bidirectional dynamic loading.” Earthquake Eng. Struct. Dyn. 42 (15): 2197–2216. https://doi.org/10.1002/eqe.2320.
Zhang, F., C. Wu, Z. X. Li, and X. L. Zhao. 2015. “Residual axial capacity of CFDST columns infilled with UHPFRC after close-range blast loading.” Thin-Walled Struct. 96 (Nov): 314–327. https://doi.org/10.1016/j.tws.2015.08.020.
Zhang, X., H. Hao, and C. Li. 2016. “Experimental investigation of the response of precast segmental columns subjected to impact loading.” Int. J. Impact Eng. 95 (Sep): 105–124. https://doi.org/10.1016/j.ijimpeng.2016.05.005.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 29, 2022
Accepted: Nov 17, 2022
Published online: Jan 17, 2023
Published in print: Apr 1, 2023
Discussion open until: Jun 17, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.