Electromagnetic Energy Harvesting via Self-Excited Resonance from Extremely Low-Frequency Vibrations
Publication: Journal of Environmental Engineering
Volume 149, Issue 6
Abstract
This paper presents an electromagnetic energy harvester (EMEH) using gravity-induced self-excited vibrational resonance. The EMEH is capable of harvesting vibration energy below 1 Hz. The structure is a cantilever-mass system, and the mass is comprised of a magnet array and its support. The EMEH is excited by the gravity of the cantilever-mass system intermittently sliding down along a central hub. To explain the output performance of the EMEH visibly, we formulated the motion process and built an eight-stage dynamics motion. The effect of the cantilever thickness on the open-circuit voltage is discussed, and the results agree with the theoretical description well. Additionally, to demonstrate the output performance of the harvester, more experiments were performed, i.e., matching impedance, charging capacitors, and powering light emitting diodes (LEDs). The EMEH delivers a maximum instantaneous output power of 144.1 mW at a beam thickness of 1 mm. For charging experiments, 47 LEDs were successfully lighted up in real-time. The high performance of the gravity-induced resonance scheme indicates tremendous low-frequency application potential.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was funded and supported by the National Natural Science Foundation of China (No. 62001281), Shuguang Program of Shanghai Education Commission (No. 20SG40), and Shanghai Sailing Program (No. 20YF1412700).
References
Bernal, A. A., and L. L. García. 2012. “The modelling of an electromagnetic energy harvesting architecture.” Appl. Math. Modell. 36 (10): 4728–4741. https://doi.org/10.1016/j.apm.2011.12.007.
Chamanyeta, H. N., A. M. R. F. El-Bab, B. W. Ikua, and E. Murimi. 2022. “Development of a varying multi-cantilever beam frequency up conversion energy harvester.” Energy Convers. Manage. 2022 (Sep): 100290. https://doi.org/10.1016/j.ecmx.2022.100290.
Chatterjee, S. 2007. “Non-linear control of friction-induced self-excited vibration.” Int. J. Non-Linear Mech. 42 (3): 459–469. https://doi.org/10.1016/j.ijnonlinmec.2007.01.015.
Choi, Y.-M., M. G. Lee, and Y. Jeon. 2017. “Wearable biomechanical energy harvesting technologies.” Energies 10 (10): 1483. https://doi.org/10.3390/en10101483.
Ding, W. 2010. Self-excited vibration theory, paradigms, and research methods. Beijing: Tsinghua Univ. Press.
Dinulovic, D., M. Shousha, M. Al-Batol, T. Zafar, J. Bickel, H.-D. Ngo, and M. Haug. 2021. “Dual-Rotor electromagnetic-based energy harvesting system for smart home applications.” IEEE Trans. Magn. 57 (2): 1. https://doi.org/10.1109/TMAG.2020.3014065.
Foisal, A. R. M., C. Hong, and G.-S. Chung. 2012. “Multi-frequency electromagnetic energy harvester using a magnetic spring cantilever.” Sens. Actuators, A 182 (Aug): 106–113. https://doi.org/10.1016/j.sna.2012.05.009.
Foong, F. M., C. K. Thein, D. J. M. S. Yurchenko, and S. Processing. 2022. “Structural optimisation through material selections for multi-cantilevered vibration electromagnetic energy harvesters.” Mech. Syst. Signal Process. 162 (Jan): 108044. https://doi.org/10.1016/j.ymssp.2021.108044.
Gao, S., X. Zeng, G. Zhang, J. Zhang, Y. Chen, S. Feng, W. Lan, J. Zhou, and Z. L. Wang. 2022a. “Triboelectric–electromagnetic hybridized module for energy harvesting of power transmission lines galloping and self-powered galloping state monitoring.” Nano Energy 101 (Oct): 107530. https://doi.org/10.1016/j.nanoen.2022.107530.
Gao, Y. M., J. R. Liang, and Y. B. Liao. 2022b. “Multiple harmonics extended impedance model of piezoelectric energy harvesting systems.” IEEE/ASME Trans. Mechatron. 27 (2): 1185–1195. https://doi.org/10.1109/TMECH.2021.3083319.
Glocker, C., and C. Studer. 2003. “The woodpecker toy.” In Proc., IMES Center for Mechanics, Zürich, Switzerland: ETH Zurich.
Glocker, C., and C. Studer. 2005. “Formulation and preparation for numerical evaluation of linear complementarity systems in dynamics.” Multibody Sys. Dyn. 13 (4): 447–463. https://doi.org/10.1007/s11044-005-2519-6.
Jung, H. J., A. T. Eshghi, and S. Lee. 2021. “Structural failure detection using wireless transmission rate from piezoelectric energy harvesters.” IEEE/ASME Trans. Mechatron. 26 (4): 1708–1718. https://doi.org/10.1109/TMECH.2020.3037291.
Kanda, K., T. Aiba, and K. Maenaka. 2022. “Piezoelectric MEMS energy harvester from airflow at low flow velocities.” Sens. Mater. 34 (5): 1879–1888. https://doi.org/10.18494/SAM3867.
Kim, J. W., M. Salauddin, H. Cho, M. S. Rasel, and J. Y. Park. 2019a. “Electromagnetic energy harvester based on a finger trigger rotational gear module and an array of disc Halbach magnets.” Appl. Energy 250 (5): 776–785. https://doi.org/10.1016/j.apenergy.2019.05.059.
Kim, S. C., J. G. Kim, Y. C. Kim, S. J. Yang, and H. Lee. 2019b. “A study of electromagnetic vibration energy harvesters: Design optimization and experimental validation.” Int. J. Precis. Eng. Manuf.-Green Technol. 6 (4): 779–788. https://doi.org/10.1007/s40684-019-00130-4.
Lan, C., G. Hu, Y. Liao, and W. Qin. 2021. “A wind-induced negative damping method to achieve high-energy orbit of a nonlinear vibration energy harvester.” Smart Mater. Struct. 30 (2): 02LT02. https://doi.org/10.1088/1361-665X/abd962.
Lee, B.-C., M. A. Rahman, S.-H. Hyun, and G.-S. Chung. 2012. “Low frequency driven electromagnetic energy harvester for self-powered system.” Smart Mater. Struct. 21 (12): 125024. https://doi.org/10.1088/0964-1726/21/12/125024.
Leine, R. I., C. Glocker, and D. H. van Campen. 2001. “Nonlinear dynamics of the woodpecker toy.” In Proc., Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf., 2629–2637. New York: American Society of Mechanical Engineers.
Li, H., G. Meng, Z. Meng, and B. Wen. 2007. “Effects of boundary conditions on a self-excited vibration system with clearance.” Int. J. Nonlinear Sci. Numer. Simul. 8 (4): 571–580. https://doi.org/10.1515/IJNSNS.2007.8.4.571.
Li, Z., et al. 2021a. “Instantaneous peak 2.1 W-level hybrid energy harvesting from human motions for self-charging battery-powered electronics.” Nano Energy 81 (Jun): 105629. https://doi.org/10.1016/j.nanoen.2020.105629.
Li, Z., X. Jiang, P. Yin, L. Tang, H. Wu, Y. Peng, J. Luo, S. Xie, H. Pu, and D. Wang. 2021b. “Towards self-powered technique in underwater robots via a high-efficiency electromagnetic transducer with circularly abrupt magnetic flux density change.” Appl. Energy 302 (Mar): 117569. https://doi.org/10.1016/j.apenergy.2021.117569.
Li, Z., Y. Liu, P. Yin, Y. Peng, J. Luo, S. Xie, and H. Pu. 2021c. “Constituting abrupt magnetic flux density change for power density improvement in electromagnetic energy harvesting.” Int. J. Mech. Sci. 198 (Apr): 106363. https://doi.org/10.1016/j.ijmecsci.2021.106363.
Li, Z., C. Xin, Y. Peng, M. Wang, J. Luo, S. Xie, and H. Pu. 2021d. “Power density improvement of piezoelectric energy harvesters via a novel hybridization scheme with electromagnetic transduction.” Micromachines 12 (7): 803. https://doi.org/10.3390/mi12070803.
Lin, Y., Z. Long, S. Liang, T. Zhong, and L. Xing. 2022. “A wearable exhaling-oxygen-sensing mask based on piezoelectric/gas-sensing coupling effect for real-time monitoring and uploading lung disease information.” J. Phys. D: Appl. Phys. 55 (22): 224001. https://doi.org/10.1088/1361-6463/ac570b.
Maharjan, P., T. Bhatta, M. Salauddin Rasel, M. Salauddin, M. Toyabur Rahman, and J. Y. Park. 2019. “High-performance cycloid inspired wearable electromagnetic energy harvester for scavenging human motion energy.” Appl. Energy 256 (Dec): 113987. https://doi.org/10.1016/j.apenergy.2019.113987.
Majewski, T. 2013. Toy as an example of non-smooth system. Hidalgo, México: Memorias Del Xix Congreso Internacional Anual De La Somim.
Mondal, J., and S. Chatterjee. 2020. “Efficacy of semi-active absorber for controlling self-excited vibration.” J. Inst. Eng. India Ser. C 101 (1): 97–103. https://doi.org/10.1007/s40032-019-00521-1.
Papangelo, A., C. Putignano, and N. Hoffmann. 2020. “Self-excited vibrations due to viscoelastic interactions.” Mech. Syst. Signal Process. 144 (Oct): 106894. https://doi.org/10.1016/j.ymssp.2020.106894.
Peng, Y., L. Zhang, Z. Li, S. Zhong, Y. Liu, S. Xie, and J. Luo. 2022. “Influences of wire eiameters on output power in electromagnetic energy harvester.” Int. J. Precis. Eng. Manuf. Green Technol. 2022 (Jun): 1–12. https://doi.org/10.1007/s40684-022-00446-8.
Pyo, S., D.-S. Kwon, H.-J. Ko, Y. Eun, and J. Kim. 2022. “Frequency up-conversion hybrid energy harvester combining piezoelectric and electromagnetic transduction mechanisms.” Int. J. Precis. Eng. Manuf. Green Technol. 9 (1): 241–251. https://doi.org/10.1007/s40684-021-00321-y.
Slavič, J., and M. Boltežar. 2006. “Non-linearity and non-smoothness in multi-body dynamics: Application to woodpecker toy.” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 220 (3): 285–296. https://doi.org/10.1243/095440605X31562.
Szabelski, K., and J. Warminski. 1995. “Self-excited system vibrations with parametric and external excitations.” J. Sound Vib. 187 (4): 595–607. https://doi.org/10.1006/jsvi.1995.0547.
Tan, Q., K. Fan, J. Guo, T. Wen, L. Gao, and S. Zhou. 2021. “A cantilever-driven rotor for efficient vibration energy harvesting.” Energy 235 (Nov): 121326. https://doi.org/10.1016/j.energy.2021.121326.
Tondl, A., and H. Ecker. 2003. “On the problem of self-excited vibration quenching by means of parametric excitation.” Arch. Appl. Mech. 72 (11): 923–932. https://doi.org/10.1007/s00419-002-0265-2.
Tsujiura, Y., E. Suwa, T. Nishi, F. Kurokawa, H. Hida, and I. Kanno. 2017. “Airflow energy harvester of piezoelectric thin-film bimorph using self-excited vibration.” Sens. Actuators, A 261 (Jul): 295–301. https://doi.org/10.1016/j.sna.2017.04.031.
Wang, T., H. Lou, and S. Zhu. 2022. “Bandwidth enhancement of a gimbaled-pendulum vibration energy harvester using spatial multi-stable mechanism.” Appl. Energy 326 (Nov): 120047. https://doi.org/10.1016/j.apenergy.2022.120047.
Wang, T., and Z. Zhu. 2022. “A new type of piezoelectric self-excited vibration energy harvester for micro-actuator’s energy storage.” J. Storage Mater. 46 (Feb): 103519. https://doi.org/10.1016/j.est.2021.103519.
Wu, Y., J. Qiu, F. Kojima, H. Ji, W. Xie, and S. Zhou. 2019. “Design methodology of a frequency up-converting energy harvester based on dual-cantilever and pendulum structures.” AIP Adv. 9 (4): 045312. https://doi.org/10.1063/1.5093361.
Xu, X., C. Zhang, Q. Han, and F. Chu. 2018. “Hybrid energy harvesting from mechanical vibrations and magnetic field.” Appl. Phys. Lett. 113 (1): 013901. https://doi.org/10.1063/1.5038412.
Yabuno, H. 2021. “Review of applications of self-excited oscillations to highly sensitive vibrational sensors.” ZAMM J. Math. Mech. 101 (7): e201900009. https://doi.org/10.1002/zamm.201900009.
Yin, P., K. C. Aw, X. Jiang, C. Xin, H. Guo, L. Tang, Y. Peng, and Z. Li. 2022. “Fish gills inspired parallel-cell triboelectric nanogenerator.” Nano Energy 95 (May): 106976. https://doi.org/10.1016/j.nanoen.2022.
Yin, Z., S. Gao, L. Jin, Y. Sun, Q. Wu, X. Zhang, and S. Guo. 2021. “A dual impact driven frequency up-conversion piezoelectric energy harvester for ultralow-frequency and wide-bandwidth operation.” Sens. Actuators, A 331 (Nov): 112961. https://doi.org/10.1016/j.sna.2021.112961.
Yu, G., L. He, J. Zhou, L. Liu, B. Zhang, and G. Cheng. 2021. “Study on mirror-image rotating piezoelectric energy harvester.” Renewable Energy 178 (Nov): 692–700. https://doi.org/10.1016/j.renene.2021.06.103.
Zhang, J., D. Qu, Z. Fang, and C. Shu. 2020. “Optimization of a piezoelectric wind energy harvester with a stepped beam.” J. Mech. Sci. Technol. 34 (11): 4357–4366. https://doi.org/10.1007/s12206-020-1001-y.
Zhang, L. B., H. L. Dai, Y. W. Yang, and L. Wang. 2019. “Design of high-efficiency electromagnetic energy harvester based on a rolling magnet.” Energy Convers. Manage. 185 (Apr): 202–210. https://doi.org/10.1016/j.enconman.2019.01.089.
Zhang, M., and F. Xu. 2022. “Tuned mass damper for self-excited vibration control: Optimization involving nonlinear aeroelastic effect.” J. Wind Eng. Ind. Aerodyn. 220 (Jan): 104836. https://doi.org/10.1016/j.jweia.2021.104836.
Zheng, K., Y. K. Cho, Z. Zhuang, and H. Li. 2013. “Optimization of the hybrid energy harvest systems sizing for net-zero site-energy houses.” J. Archit. Eng. 19 (3): 174–178. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000109.
Zhou, S., M. Lallart, and A. Erturk. 2022. “Multistable vibration energy harvesters: Principle, progress, and perspectives.” J. Sound Vib. (Mar): 116886. https://doi.org/10.1016/j.jsv.2022.116886.
Zhu, J., L. Qin, and Y. Li. 2022. “Bilateral multi-impact oscillators for cantilever energy harvesting enhancement.” Int. J. Green Energy 19 (5): 521–528. https://doi.org/10.1080/15435075.2021.1947826.
Zhu, Y., M. Qi, Z. Liu, J. Huang, D. Huang, X. Yan, and L. Lin. 2021. “A 5-mm untethered crawling robot via self-excited electrostatic vibration.” IEEE Trans. Rob. 38 (2): 719–730. https://doi.org/10.1109/TRO.2021.3088053.
Zorlu, Ö., E. T. Topal, and H. Külah. 2011. “A vibration-based electromagnetic energy harvester using mechanical frequency up-conversion method.” IEEE Sens. J. 11 (2): 481–488. https://doi.org/10.1109/JSEN.2010.2059007.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 24, 2022
Accepted: Feb 9, 2023
Published online: Apr 6, 2023
Published in print: Jun 1, 2023
Discussion open until: Sep 6, 2023
ASCE Technical Topics:
- Beams
- Cantilevers
- Continuum mechanics
- Dynamics (solid mechanics)
- Energy engineering
- Energy harvesting
- Energy sources (by type)
- Engineering mechanics
- Forces (type)
- Magnetic fields
- Material mechanics
- Material properties
- Materials engineering
- Motion (dynamics)
- Oscillations
- Renewable energy
- Resonance
- Solid mechanics
- Structural engineering
- Structural members
- Structural systems
- Thickness
- Vibration
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.