Effects of a Galfenol-Based Energy Harvester Installed at the Track Fastener on Track Vibration
Publication: Journal of Environmental Engineering
Volume 149, Issue 8
Abstract
Vibration energy harvesters (VEHs) can utilize the vibration of the track to generate electricity and provide power for other devices within the harvester. To analyze whether energy harvesters arranged in an array harm track operation, we conducted a simulation analysis. Based on the vehicle–track coupling model, the influence of inductive electromotive force on track vibration was analyzed and compared with the simulation results obtained from the classical vehicle–track coupling model. The rail vibration displacement was reduced from 0.5 to 0.0692 mm, and the maximum vibration acceleration of the rail was reduced from 2.3759 to . The energy harvester can attenuate the vibration of the track significantly, and has a minor influence on the regular operation of the track.
Practical Applications
The vibration of a railway can be transformed to electric energy and used to power sensors at the railway side and train sides, such as velocity sensors, temperature sensors, accelerometers, wireless transmission modules, and other wireless sensor network (WSN) devices. It also can be used as backup power for the auxiliary load on the railway side, such as traffic lights and speed measuring radar. A vibration energy harvester installed at the fastener has a simple structure and can provide enough power for WSN sensors. It provides a good energy supply for line-side monitors and auxiliary devices. Because safety is the most critical issue for track devices, the effect of the installation of VEHs on the operation of the track should be analyzed. The vibration of a track with a fastener VEH is less than that without a VEH, which will reduce the impact of vibration on the environment and ensure the safe running of trains. This method also applies to the safety analysis of other track energy harvesting devices.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data supporting this study’s findings are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the Zhejiang Province Public Welfare Technology Application Research Project under Grant LGG21F010004 and the Natural Science Foundation of Zhejiang Province under Grant LY17E050026.
References
Deng, Z., and M. J. Dapino. 2017. “Review of magnetostrictive vibration energy harvesters.” Smart Mater. Struct. 26 (10): 103001. https://doi.org/10.1088/1361-665X/aa8347.
Dziadak, B., M. Kucharek, and J. Starzynski. 2022. “Powering the WSN node for monitoring rail car parameters, using a piezoelectric energy harvester.” Energies 15 (5): 1641. https://doi.org/10.3390/en15051641.
Gao, M., P. Wang, Y. Cao, R. Chen, and D. Cai. 2017. “Design and verification of a rail-borne energy harvester for powering wireless sensor networks in the railway industry.” IEEE Trans. Intell. Transp. Syst. 18 (6): 1596–1609.
Hadas, Z., O. Rubes, F. Ksica, and J. Chalupa. 2022. “Kinetic electromagnetic energy harvester for railway applications—Development and test with wireless sensor.” Sensors 22 (3): 905. https://doi.org/10.3390/s22030905.
Liu, G., Z. Fang, Z. Zhang, X. Tan, C. Dai, X. Wu, Z. Jin, and D. Li. 2022. “A vibration energy harvester for freight train track self-powered application.” iScience 25 (10): 105155. https://doi.org/10.1016/j.isci.2022.105155.
Meng, A., S. Jiang, F. Liu, and M. Zhang. 2016. “Study on the energy harvester based on gmm for the railway wireless sensors network.” Chin. J. Sens. Actuators 29 (11): 1748–1752.
Meng, A., C. Yan, W. Pan, M. Li, M. Zhang, and S. Wu. 2019. “Optimized design of energy harvester on rail fastener.” J. Hangzhou Dianzi Univ. (Natl. Sci.) 39 (6): 42–46.
Mingyuan, G., and W. Ping. 2018. “Harvesting railroad vibration energy by magentic levitation oscillation.” J. China Railw. Soc. 40 (6): 144–153.
Nelson, C. A., A. Pourghodrat, and M. Fateh. 2011. “Energy harvesting from vertical deflection of railroad track using a hydraulic system for improving railroad track safety.” In Proc., ASME 2011 Int. Mechanical Engineering Congress and Exposition, IMECE 2011, 259–266. New York: ASME.
Pan, Y., T. Lin, F. Qian, C. Liu, J. Yu, J. Zuo, and L. Zuo. 2019. “Modeling and field-test of a compact electromagnetic energy harvester for railroad transportation.” Appl. Energy 247 (Aug): 309–321. https://doi.org/10.1016/j.apenergy.2019.03.051.
Qi, L., H. Pan, Y. Pan, D. Luo, J. Yan, and Z. Zhang. 2022. “A review of vibration energy harvesting in rail transportation field.” iScience 25 (3): 103849. https://doi.org/10.1016/j.isci.2022.103849.
Sheng, W., H. Xiang, Z. Zhang, and X. Yuan. 2022. “High-efficiency piezoelectric energy harvester for vehicle-induced bridge vibrations: Theory and experiment.” Compos. Struct. 299 (Nov): 116040. https://doi.org/10.1016/j.compstruct.2022.116040.
Shi, H., Z. Liu, and X. Mei. 2020. “Overview of human walking induced energy harvesting technologies and its possibility for walking robotics.” Energies 13 (1): 86. https://doi.org/10.3390/en13010086.
Viola, A., V. Franzitta, G. Cipriani, V. Di Dio, F. M. Raimondi, and M. Trapanese. 2015. “A Magnetostrictive electric power generator for energy harvesting from traffic: Design and experimental verification.” IEEE Trans. Magn. 51 (11): 1–4. https://doi.org/10.1109/TMAG.2015.2454442.
Wang, G., W. Xu, S. Gao, B. Yang, and G. Lu. 2017. “An energy harvesting type ultrasonic motor.” Ultrasonics 75 (Mar): 22–27. https://doi.org/10.1016/j.ultras.2016.11.007.
Wang, J., Y. Cao, H. Xiang, Z. Zhang, J. Liang, X. Li, D. Ding, T. Li, and L. Tang. 2022. “A piezoelectric smart backing ring for high-performance power generation subject to train induced steel-spring fulcrum forces.” Energy Convers. Manage. 257 (Apr): 115442. https://doi.org/10.1016/j.enconman.2022.115442.
Wang, J., S. Gu, A. Abdelkefi, M. Zhang, W. Xu, and Y. Lai. 2021. “Piezoelectric energy harvesting from flow-induced vibrations of a square cylinder at various angles of attack.” Smart Mater. Struct. 30 (8): 08LT02. https://doi.org/10.1088/1361-665X/ac075a.
Wang, J., S. Gu, C. Zhang, G. Hu, G. Chen, K. Yang, H. Li, Y. Lai, G. Litak, and D. Yurchenko. 2020. “Hybrid wind energy scavenging by coupling vortex-induced vibrations and galloping.” Energy Convers. Manage. 213 (Jun): 112835. https://doi.org/10.1016/j.enconman.2020.112835.
Wang, J., Z. Shi, H. Xiang, and G. Song. 2015. “Modeling on energy harvesting from a railway system using piezoelectric transducers.” Smart Mater. Struct. 24 (10): 105017. https://doi.org/10.1088/0964-1726/24/10/105017.
Wang, J. J., G. P. Penamalli, and Z. Lei. 2012. “Electromagnetic energy harvesting from train induced railway track vibrations.” In Proc., 8th IEEE/ASME Int. Conf. on Mechatronic and Embedded Systems and Applications, 29–34. New York: IEEE.
Wu, X., T. Zhang, J. Lie, T. Zhang, W. Kong, Y. Pan, D. Luo, and Z. Zhang. 2022. “A vibration energy harvesting system for self-powered applications in heavy railways.” Sustainable Energy Technol. Assess. 53 (Part A): 102373. https://doi.org/10.1016/j.seta.2022.102373.
Xie, L., J. Li, X. Li, L. Huang, and S. Cai. 2018. “Damping-tunable energy-harvesting vehicle damper with multiple controlled generators: Design, modeling and experiments.” Mech. Syst. Signal Process. 99 (Jan): 859–872. https://doi.org/10.1016/j.ymssp.2017.07.005.
Yuan, T. C., J. Yang, R. G. Song, and X. W. Liu. 2014. “Vibration energy harvesting system for railroad safety based on running vehicles.” Smart Mater. Struct. 23 (12): 125046. https://doi.org/10.1088/0964-1726/23/12/125046.
Zhai, W. 2015. Vehicle-track coupling dynamics. Beijing: Science Press.
Zhai, W., K. Wang, and C. Cai. 2009. “Fundamentals of vehicle–track coupled dynamics.” Veh. Syst. Dyn. 47 (11): 1349–1376. https://doi.org/10.1080/00423110802621561.
Zhai, W., H. Xia, C. Cai, M. Gao, X. Li, X. Guo, N. Zhang, and K. Wang. 2013. “High-speed train–track–bridge dynamic interactions—Part I: Theoretical model and numerical simulation.” Int. J. Rail Transp. 1 (1–2): 3–24. https://doi.org/10.1080/23248378.2013.791498.
Zhang, H., X. Su, L. Quan, J. Jiang, B. Dong, and G. Wei. 2021. “Sponge-supported triboelectric nanogenerator for energy harvesting from rail vibration.” J. Energy Eng. 147 (3): 04021006. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000751.
Zhao, Y., H. Zhang, Z. Li, C. Li, L. Sun, and J. Xiao. 2018. “Study on failure criteria for fastener elastic bar of high speed railway ballastless track.” Railway Eng. 58 (6): 125–128.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 27, 2022
Accepted: Mar 16, 2023
Published online: May 26, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 26, 2023
ASCE Technical Topics:
- Construction engineering
- Construction methods
- Continuum mechanics
- Coupling
- Dynamics (solid mechanics)
- Electric power
- Energy engineering
- Energy harvesting
- Energy sources (by type)
- Engineering fundamentals
- Engineering mechanics
- Fastening
- Highway transportation
- Infrastructure
- Models (by type)
- Motion (dynamics)
- Renewable energy
- Simulation models
- Solid mechanics
- Structural engineering
- Structural members
- Structural systems
- Transportation engineering
- Vehicles
- Vibration
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.