Effects of Incorporating Acrylic Particles on Mechanical and Photocatalytic Properties of Recycled Concrete
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 12
Abstract
To mitigate the impact of vehicular emissions on air quality and reduce the concentrations of atmospheric pollutants, this study developed pavement materials with purification functions using as a photocatalyst and construction waste as an aggregate. Polymethyl methacrylate (PMMA) acrylic particles were added to enhance the light transmittance of the concrete, and the volume replacement percentages of PMMA replacing aggregate (sand) were 20%, 40%, 60%, and 80%. The physical, mechanical, and photocatalytic properties of the photocatalytic recycled concrete were characterized through testing the water absorption, drying shrinkage, compressive strength, flexural strength, splitting tensile strength, and degradation efficiency. The results showed that the addition of PMMA increased the water absorption, reduced the drying shrinkage, and decreased the mechanical strength (compressive strength, flexural strength, and splitting tensile strength) of the photocatalytic recycled concrete. Notably, PMMA significantly improved the photocatalytic efficiency by increasing the light transmittance, but the promotion effect was weakened when the PMMA replacement percentages exceeded 60%. When the PMMA replacement percentages ranged from 20% to 40%, the photocatalytic recycled concrete maintained good mechanical strength and photocatalytic efficiency. This study presents an effective approach for improving the catalytic efficiency of photocatalytic recycled concrete while concurrently enhancing the utilization rate of construction waste.
Practical Applications
The photocatalytic recycled concrete developed in this study has significant potential in practical applications, especially in urban environments. It can serve as a material for roads, sidewalks, and building surfaces. Due to its air purification function, it can break down harmful pollutants in the atmosphere, such as nitrogen oxides and volatile organic compounds, thereby aiding in the improvement of urban air quality. In addition, the use of construction waste as aggregate promotes the recycling of construction waste and reduces dependence on natural resources.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published paper.
Acknowledgments
The research presented in this manuscript is funded by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project (SKLGP2022Z001), and the Sichuan Natural Science Foundation (2022NSFSC1176). The authors thank TopEdit (www.topeditsci.com) for its linguistic assistance during the preparation of this manuscript.
Author contributions: Jie Deng: conceptualization, methodology, investigation, visualization, and writing–original draft; Xiao Zhao: supervision, funding acquisition, methodology, and writing–review and editing; Shang Li: methodology, visualization, and writing–review and editing; and Jianjun Zhao: visualization and writing–review and editing.
References
Ali, E. E., and S. H. Al-Tersawy. 2012. “Recycled glass as a partial replacement for fine aggregate in self compacting concrete.” Constr. Build. Mater. 35 (Oct): 785–791. https://doi.org/10.1016/j.conbuildmat.2012.04.117.
Ambikakumari Sanalkumar, K. U., and E.-H. Yang. 2021. “Self-cleaning performance of nano- modified metakaolin-based geopolymers.” Cem. Concr. Compos. 115 (Jan): 103847. https://doi.org/10.1016/j.cemconcomp.2020.103847.
Bisht, K., and P. Ramana. 2018. “Sustainable production of concrete containing discarded beverage glass as fine aggregate.” Constr. Build. Mater. 177 (Jul): 116–124. https://doi.org/10.1016/j.conbuildmat.2018.05.119.
Chen, J., and C.-S. Poon. 2009. “Photocatalytic activity of titanium dioxide modified concrete materials—Influence of utilizing recycled glass cullets as aggregates.” J. Environ. Manage. 90 (11): 3436–3442. https://doi.org/10.1016/j.jenvman.2009.05.029.
Choi, H.-J., J.-J. Park, and D.-Y. Yoo. 2021. “Benefits of photocatalyst on mechanical properties and nitrogen oxide removal of ultra-high-performance concrete.” Constr. Build. Mater. 285 (May): 122921. https://doi.org/10.1016/j.conbuildmat.2021.122921.
de Castro, S., and J. de Brito. 2013. “Evaluation of the durability of concrete made with crushed glass aggregates.” J. Cleaner Prod. 41 (Feb): 7–14. https://doi.org/10.1016/j.jclepro.2012.09.021.
Folli, A., M. Strøm, T. P. Madsen, T. Henriksen, J. Lang, J. Emenius, T. Klevebrant, and Å. Nilsson. 2015. “Field study of air purifying paving elements containing .” Atmos. Environ. 107 (Apr): 44–51. https://doi.org/10.1016/j.atmosenv.2015.02.025.
Fotis, P., and M. Polemis. 2018. “Sustainable development, environmental policy and renewable energy use: A dynamic panel data approach.” Sustainable Dev. 26 (6): 726–740. https://doi.org/10.1002/sd.1742.
George, C., A. Beeldens, F. Barmpas, J.-F. Doussin, G. Manganelli, H. Herrmann, J. Kleffmann, and A. Mellouki. 2016. “Impact of photocatalytic remediation of pollutants on urban air quality.” Front. Environ. Sci. Eng. 10 (5): 2. https://doi.org/10.1007/s11783-016-0834-1.
Gorospe, K., E. Booya, H. Ghaednia, and S. Das. 2019. “Effect of various glass aggregates on the shrinkage and expansion of cement mortar.” Constr. Build. Mater. 210 (Jun): 301–311. https://doi.org/10.1016/j.conbuildmat.2019.03.192.
He, R., X. Huang, J. Zhang, Y. Geng, and H. Guo. 2019. “Preparation and evaluation of exhaust-purifying cement concrete employing titanium dioxide.” Materials 12 (13): 2182. https://doi.org/10.3390/ma12132182.
Henriques, T. D. S., D. C. Dal Molin, and Â. B. Masuero. 2018. “Study of the influence of sorted polymeric optical fibers (POFs) in specimens of a light-transmitting cement-based material (LTCM).” Constr. Build. Mater. 161 (Feb): 305–315. https://doi.org/10.1016/j.conbuildmat.2017.11.137.
Ju, T., M. Lei, G. Guo, J. Xi, Y. Zhang, Y. Xu, and Q. Lou. 2023. “A new prediction method of industrial atmospheric pollutant emission intensity based on pollutant emission standard quantification.” Front. Environ. Sci. Eng. 17 (1): 8. https://doi.org/10.1007/s11783-023-1608-1.
Kovačević, T., J. Rusmirović, N. Tomić, M. Marinović-Cincović, Ž. Kamberović, M. Tomić, and A. Marinković. 2017. “New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties.” Composites, Part B 127 (Oct): 1–14. https://doi.org/10.1016/j.compositesb.2017.06.020.
Kovačević, T., J. Rusmirović, N. Tomić, G. Mladenović, M. Milošević, N. Mitrović, and A. Marinković. 2019. “Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites.” Polym. Compos. 40 (3): 1170–1186. https://doi.org/10.1002/pc.24827.
Li, Y., J. Li, and H. Guo. 2015. “Preparation and study of light transmitting properties of sulfoaluminate cement-based materials.” Mater. Des. 83 (Oct): 185–192. https://doi.org/10.1016/j.matdes.2015.06.021.
Lian, F., and Z. Yin. 2022. “Mechanical, light transmittance properties and simulation study of sustainable translucent lightweight aggregate concrete.” Mater. Res. Express 9 (2): 025507. https://doi.org/10.1088/2053-1591/ac5552.
Limbachiya, M. C. 2009. “Bulk engineering and durability properties of washed glass sand concrete.” Constr. Build. Mater. 23 (2): 1078–1083. https://doi.org/10.1016/j.conbuildmat.2008.05.022.
Lu, J., Z. Duan, and C. S. Poon. 2017. “Combined use of waste glass powder and cullet in architectural mortar.” Cem. Concr. Compos. 82 (Sep): 34–44. https://doi.org/10.1016/j.cemconcomp.2017.05.011.
Lu, J.-X., H. Zheng, S. Yang, P. He, and C. S. Poon. 2019. “Co-utilization of waste glass cullet and glass powder in precast concrete products.” Constr. Build. Mater. 223 (Oct): 210–220. https://doi.org/10.1016/j.conbuildmat.2019.06.231.
Lyu, C., Z. Xie, and Z. Li. 2022. “Market supervision, innovation offsets and energy efficiency: Evidence from environmental pollution liability insurance in China.” Energy Policy 171 (Dec): 113267. https://doi.org/10.1016/j.enpol.2022.113267.
Ma, Q., Z. Mao, M. Lei, J. Zhang, Z. Luo, S. Li, G. Du, and Y. Li. 2023. “Experimental investigation of concrete prepared with waste rubber and waste glass.” Ceram. Int. 49 (11): 16951–16970. https://doi.org/10.1016/j.ceramint.2023.02.058.
Miao, Z., T. Baležentis, S. Shao, and D. Chang. 2019. “Energy use, industrial soot and vehicle exhaust pollution—China’s regional air pollution recognition, performance decomposition and governance.” Energy Econ. 83 (Sep): 501–514. https://doi.org/10.1016/j.eneco.2019.07.002.
MOHURD (Ministry of Housing and Urban-Rural Development). 2009. Standard for test methods of long-term performance and durability of ordinary concrete. GB/T 50082-2009. Beijing: Chinese Standard Press.
MOHURD (Ministry of Housing and Urban-Rural Development). 2011. Specification for mix proportion design of ordinary concrete. JGJ 55-2011. Beijing: Chinese Standard Press.
MOHURD (Ministry of Housing and Urban-Rural Development). 2019. Standard for test methods of concrete physical and mechanical properties. GB/T 50081-2019.0. Beijing: Chinese Standard Press.
MOHURD (Ministry of Housing and Urban-Rural Development). 2020. Test code for hydraulic concrete. SL/T 352-2020. Beijing: Chinese Standard Press.
Nasr, M., C. Eid, R. Habchi, P. Miele, and M. Bechelany. 2018. “Recent progress on titanium dioxide nanomaterials for photocatalytic applications.” ChemSusChem 11 (18): 3023–3047. https://doi.org/10.1002/cssc.201800874.
Navabi, D., M. Javidruzi, M. R. Hafezi, and A. Mosavi. 2021. “The high-performance light transmitting concrete and experimental analysis of using polymethylmethacrylate optical fibers in it.” J. Build. Eng. 38 (Jun): 102076. https://doi.org/10.1016/j.jobe.2020.102076.
Nguyen, C. H., C.-C. Fu, and R.-S. Juang. 2018. “Degradation of methylene blue and methyl orange by palladium-doped photocatalysis for water reuse: Efficiency and degradation pathways.” J. Cleaner Prod. 202 (Nov): 413–427. https://doi.org/10.1016/j.jclepro.2018.08.110.
Piuzzi, G. P., H. C. Scheuermann Filho, J. A. Villena Del Carpio, and N. C. Consoli. 2021. “The effects of porosity, asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends.” Geotext. Geomembr. 49 (3): 864–870. https://doi.org/10.1016/j.geotexmem.2021.01.002.
Rhys-Tyler, G. A., W. Legassick, and M. C. Bell. 2011. “The significance of vehicle emissions standards for levels of exhaust pollution from light vehicles in an urban area.” Atmos. Environ. 45 (19): 3286–3293. https://doi.org/10.1016/j.atmosenv.2011.03.035.
SAMR SAC (State Administration for Market Regulation, National Standardization Administration). 2020. Test method for water purification performance of photocatalytic materials. GB/T 23762-2020. Beijing: Chinese Standard Press.
SAMR SAC (State Administration for Market Regulation, National Standardization Administration). 2021. Method of testing cements-determination of strength. GB/T 17671-2021. Beijing: Chinese Standard Press.
Si, H., M. Zhou, Y. Fang, J. He, L. Yang, and F. Wang. 2021. “Photocatalytic concrete for NOx degradation: Influence factors and durability.” Constr. Build. Mater. 298 (Sep): 123835. https://doi.org/10.1016/j.conbuildmat.2021.123835.
Spasiano, D., R. Marotta, S. Malato, P. Fernandez-Ibanez, and I. Di Somma. 2015. “Solar photocatalysis: Materials, reactors, some commercial, and pre-industrialized applications. A comprehensive approach.” Appl. Catal., B 170 (Jul): 90–123. https://doi.org/10.1016/j.apcatb.2014.12.050.
Staub de Melo, J. V. S., G. Trichês, P. J. P. Gleize, and J. Villena. 2012. “Development and evaluation of the efficiency of photocatalytic pavement blocks in the laboratory and after one year in the field.” Constr. Build. Mater. 37 (Dec): 310–319. https://doi.org/10.1016/j.conbuildmat.2012.07.073.
Torres de Rosso, L., and J. V. Staub de Melo. 2020. “Impact of incorporating recycled glass on the photocatalytic capacity of paving concrete blocks.” Constr. Build. Mater. 259 (Oct): 119778. https://doi.org/10.1016/j.conbuildmat.2020.119778.
Wang, J., et al. 2019. “Vehicle emission and atmospheric pollution in China: Problems, progress, and prospects.” PeerJ 7 (May): e6932. https://doi.org/10.7717/peerj.6932.
Wang, Y., N. Zhang, Y. Zhou, C. Li, J. Zhao, and Y. Zhang. 2022. “Photocatalysis in alkali activated cementitious materials.” J. Build. Eng. 46 (Apr): 103749. https://doi.org/10.1016/j.jobe.2021.103749.
Wongkeo, W., P. Thongsanitgarn, and A. Chaipanich. 2012. “Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars.” Mater. Des. 36 (36): 655–662. https://doi.org/10.1016/j.matdes.2011.11.043.
Xu, Y., R. Jin, L. Hu, B. Li, W. Chen, J. Shen, P. Wu, and J. Fang. 2020. “Studying the mix design and investigating the photocatalytic performance of pervious concrete containing -Soaked recycled aggregates.” J. Cleaner Prod. 248 (Mar): 119281. https://doi.org/10.1016/j.jclepro.2019.119281.
Yang, L., A. Hakki, F. Wang, and D. E. Macphee. 2018. “Photocatalyst efficiencies in concrete technology: The effect of photocatalyst placement.” Appl. Catal., B 222 (Mar): 200–208. https://doi.org/10.1016/j.apcatb.2017.10.013.
Yu, Y., K. Li, S. Duan, and C. Song. 2023. “Economic growth and environmental pollution in China: New evidence from government work reports.” Energy Econ. 124 (Aug): 106803. https://doi.org/10.1016/j.eneco.2023.106803.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 36 • Issue 12 • December 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Sep 25, 2023
Accepted: Apr 26, 2024
Published online: Sep 30, 2024
Published in print: Dec 1, 2024
Discussion open until: Feb 28, 2025
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.