Properties and Microstructure of Alkali-Activated Slag Paste Modified by Superabsorbent Polymers
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 5
Abstract
Superabsorbent polymers (SAPs) can serve as effective internal curing agents in alkali-activated slag (AAS) systems, mitigating the risk of cracking. However, the influence of SAPs on the properties and microstructure of AAS systems is not yet fully understood. In this study, the effects of SAPs on the properties, reaction products, and internal moisture migration of AAS pastes were investigated. The water released by SAPs during curing supplemented the water consumption in the hydration process, maintained internal relative humidity, and reduced autogenous shrinkage by more than 80%. However, the addition of SAPs not only created voids in the hardened paste, as indicated by the mercury intrusion porosimetry (MIP) results, but also increased the microscopic pore volume of the paste. SAPs did not change the phase composition of AAS hydration products, but increased the differential thermogravimetry (DTG) peak corresponding to the main hydration product C(-A)-S-H gel at 28 days. The increase in chemically bound water in AAS pastes containing SAPs, along with the changes in the transverse relaxation time () peak area corresponding to SAPs in the low-field NMR results, likely are due to the gradual release of water during internal curing by SAPs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was funded by the National Natural Science Foundation of China (Grant No. 52278272).
References
ASTM. 2019. Standard test method for autogenous strain of cement paste and mortar. ASTM C1698. West Conshohocken, PA: ASTM.
Bassani, M., L. Tefa, D. Sabia, and P. Palmero. 2022. “Optimal constituent mix ratio for improved fresh properties of cementitious and alkali-activated porous concretes.” J. Mater. Civ. Eng. 34 (11): 04022308. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004460.
Choi, Y. C., G. D. Moon, S. Oh, S. H. Jung, and K. M. Lee. 2016. “Shrinkage characteristics of alkali-activated slag mortar with SAP.” In Vol. 13 of Proc., 8th Rilem Int. Conf. on Mechanisms of Cracking and Debonding in Pavements, 313–318. Berlin: Springer.
Jin, F., K. Gu, and A. Al-Tabbaa. 2014. “Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste.” Constr. Build. Mater. 51 (Jan): 395–404. https://doi.org/10.1016/j.conbuildmat.2013.10.081.
Lee, N. K., and H. K. Lee. 2016. “Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated fly ash/slag paste.” Cem. Concr. Compos. 72 (Sep): 168–179. https://doi.org/10.1016/j.cemconcomp.2016.06.004.
Li, Z., M. Wyrzykowski, H. Dong, J. Granja, M. Azenha, P. Lura, and G. Ye. 2020. “Internal curing by superabsorbent polymers in alkali-activated slag.” Cem. Concr. Res. 135 (Sep): 106123. https://doi.org/10.1016/j.cemconres.2020.106123.
Liu, J., L. Hu, L. P. Tang, E. Q. Zhang, and J. Ren. 2020. “Shrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement.” Constr. Build. Mater. 248 (Mar): 118687. https://doi.org/10.1016/j.conbuildmat.2020.118687.
Mechtcherine, V., et al. 2021. “Application of super absorbent polymers (SAP) in concrete construction—Update of RILEM state-of-the-art report.” Mater. Struct. 54 (2): 1–20. https://doi.org/10.1617/s11527-021-01668-z.
Melo Neto, A. A., M. A. Cincotto, and W. Repette. 2008. “Drying and autogenous shrinkage of pastes and mortars with activated slag cement.” Cem. Concr. Res. 38 (4): 565–574. https://doi.org/10.1016/j.cemconres.2007.11.002.
Oh, S., and Y. C. Choi. 2018. “Superabsorbent polymers as internal curing agents in alkali activated slag mortars.” Constr. Build. Mater. 159 (Mar): 1–8. https://doi.org/10.1016/j.conbuildmat.2017.10.121.
Palacios, M., and F. Puertas. 2007. “Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes.” Cem. Concr. Res. 37 (5): 691–702. https://doi.org/10.1016/j.cemconres.2006.11.021.
Provis, J. L., and S. A. Bernal. 2014. “Geopolymers and related alkali-activated materials.” Annu. Rev. Mater. Res. 44 (Mar): 299–327. https://doi.org/10.1146/annurev-matsci-070813-113515.
Provis, J. L., A. Palomo, and C. J. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78 (Mar): 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Schröfl, C., K. A. Erk, W. Siriwatwechakul, M. Wyrzykowski, and D. Snoeck. 2022. “Recent progress in superabsorbent polymers for concrete.” Cem. Concr. Res. 151 (Apr): 106648. https://doi.org/10.1016/j.cemconres.2021.106648.
Shi, C., D. Roy, and P. Krivenko. 2003. Alkali-activated cements and concretes. Boca Raton, FL: CRC Press.
Snoeck, D., O. M. Jensen, and N. De Belie. 2015. “The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials.” Cem. Concr. Res. 74 (Sep): 59–67. https://doi.org/10.1016/j.cemconres.2015.03.020.
Snoeck, D., L. Pel, and N. De Belie. 2017. “The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR.” Sci. Rep. 7 (1): 9514. https://doi.org/10.1038/s41598-017-10306-0.
Snoeck, D., L. Pel, and N. De Belie. 2018a. “Superabsorbent polymers to mitigate plastic drying shrinkage in a cement paste as studied by NMR.” Cem. Concr. Compos. 93 (Mar): 54–62. https://doi.org/10.1016/j.cemconcomp.2018.06.019.
Snoeck, D., C. Schrofl, and V. Mechtcherine. 2018b. “Recommendation of RILEM TC 260-RSC: Testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials.” Mater. Struct. 51 (5): 116. https://doi.org/10.1617/s11527-018-1242-8.
Song, C., Y. C. Choi, and S. Choi. 2016. “Effect of internal curing by superabsorbent polymers—Internal relative humidity and autogenous shrinkage of alkali-activated slag mortars.” Constr. Build. Mater. 123 (Oct): 198–206. https://doi.org/10.1016/j.conbuildmat.2016.07.007.
Tenório Filho, J. R., M. A. Pereira Gomes de Araújo, D. Snoeck, and N. De Belie. 2019. “Discussing different approaches for the time-zero as start for autogenous shrinkage in cement pastes containing superabsorbent polymers.” Materials 12 (18): 2962. https://doi.org/10.3390/ma12182962.
Yang, J., D. Snoeck, N. De Belie, and Z. Sun. 2021a. “Comparison of liquid absorption-release of superabsorbent polymers in alkali-activated slag and Portland cement systems: An NMR study combined with additional methods.” Cem. Concr. Res. 142 (Mar): 106369. https://doi.org/10.1016/j.cemconres.2021.106369.
Yang, J., D. Snoeck, N. De Belie, and Z. Sun. 2021b. “Effect of superabsorbent polymers and expansive additives on the shrinkage of alkali-activated slag.” Cem. Concr. Compos. 123 (Oct): 104218. https://doi.org/10.1016/j.cemconcomp.2021.104218.
Yang, J., Z. Sun, Y. Zhao, Y. Ji, and B. Li. 2020. “The water absorption-release of superabsorbent polymers in fresh cement paste: An NMR study.” J. Adv. Concr. Technol. 18 (3): 139–145. https://doi.org/10.3151/jact.18.139.
You, N. Q., G. R. Zhu, T. T. He, and Y. M. Zhang. 2022. “Effect of predrying temperature on carbonation of alkali-activated slag pastes.” J. Mater. Civ. Eng. 34 (6): 04022091. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004236.
Yu, Z. H., L. S. Wu, C. Zhang, and T. Bangi. 2023. “Effect of crushed granite, superabsorbent polymer, and expansive agent on the workability, compressive properties, and autogenous shrinkage of ultrahigh-performance concrete.” J. Mater. Civ. Eng. 35 (4): 04023050. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004703.
Yuan, X., W. Chen, Z. Lu, and H. Chen. 2014. “Shrinkage compensation of alkali-activated slag concrete and microstructural analysis.” Constr. Build. Mater. 66 (Sep): 422–428. https://doi.org/10.1016/j.conbuildmat.2014.05.085.
Zhang, M., M. Aba, Y. Sakoi, Y. Tsukinaga, K. Shimomukai, and Y. H. Kuang. 2021. “Synergetic effect of expansive agent (KEA) and superabsorbent polymers (SAP) on the shrinkage, strength and pore structures of mortars.” J. Adv. Concr. Technol. 19 (1): 26–39. https://doi.org/10.3151/jact.19.26.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jun 11, 2023
Accepted: Oct 27, 2023
Published online: Feb 23, 2024
Published in print: May 1, 2024
Discussion open until: Jul 23, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.