Volume Deformation and Hydraulic Conductivity Behavior of Sand-Bentonite Mixtures with Fiberglass Additives under High Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 4
Abstract
The performance of energy geostructures is dependent on the surrounding soil properties in the presence of high temperatures or thermal cycles. Change in temperature may affect many engineering parameters of soils. Sand-bentonite mixtures or bentonite, which are used as a buffer should keep their performance at design level for a long time. Purpose: In order to improve engineering behavior of soils under high temperatures thermally durable materials may be used. Volume deformation and hydraulic conductivity behavior of 30% bentonite–70% sand mixtures in the presence of fiberglass additives were investigated. Methods: Consolidation tests were performed at room and high temperatures (80°C), hydraulic conductivity tests were started at room temperature, and a temperature cycle (25°C, 50°C, and 80°C) was applied. Results: Fiberglass increased the amount of compression insignificantly under room temperature, whereas the total compression amount increased remarkably under high temperature. On the other hand, the hydraulic conductivity increased under high temperature with fiberglass additive. Conclusions: Fiberglass-added sand-bentonite mixtures can be used around energy structures as an alternative buffer material with high-temperature resistance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This study is supported by The Scientific and Technological Research Council of Turkey (TÜBİTAK) (Grant No. 217M553). The authors are grateful for this support. The authors would like to thank 100/2,000 The Council of Higher Education (YÖK) scholarship for Esra Güneri.
References
Abuel-Naga, H., D. Bergado, S. Soralump, and P. Rujivipat. 2005. “Thermal consolidation of soft Bangkok clay.” Lowland Technol. Int. J. 7 (1): 13–21.
ASTM. 2001. ASTM standard test methods for measurement of hydraulic conductivity of saturated porous materials using a flexible wall permeameter. ASTM D5084-16. West Conshohocken, PA: ASTM.
ASTM. 2007. Standard test method for particle-size analysis of soils (withdrawn 2016). ASTM D422-63. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. ASTM D2435/D2435M-11. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort. ASTM D698-12. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. ASTM D6913/D6913-04. West Conshohocken, PA: ASTM.
Bag, R., and K. Jadda. 2018. “Effect of sand ratio on swelling pressure and hydraulic conductivity of an Indian bentonite-sand mixture.” In Proc., 7th Int. Conf. on Unsaturated Soils. Hong Kong: Hong Kong Univ. of Science and Technology.
Bag, R., and A. Rabbani. 2017. “Effect of temperature on swelling pressure and compressibility characteristics of soil.” Appl. Clay Sci. 136 (Apr): 1–7. https://doi.org/10.1016/j.clay.2016.10.043.
Bouazza, A., H. M. Abuel-Naga, W. P. Gates, and L. Laloui. 2008. “Temperature effects on volume change and hydraulic properties of geosynthetic clay liners.” In Proc., First Pan American Geosynthetics Conf. and Exhibition. Cancun, Mexico: Industrial Fabrics Association International.
Castaing, P. 1992. “Vieillissement des matériaux composites verre-polyester en milieu marin: Délaminage d’origine osmotique.” Ph.D. thesis, Ingénieur E.N.S.C.T., Institut National Polytechnique de Toulouse.
Cekerevac, C., and L. Laloui. 2004. “Experimental study of thermal effects on the mechanical behaviour of a clay.” Int. J. Numer. Anal. Methods Geomech. 28 (3): 209–228. https://doi.org/10.1002/nag.332.
Chen, T., M. Du, and Q. Yao. 2021. “Evolution of hydraulic conductivity of unsaturated compacted Na-Bentonite under confined condition-including the microstructure effects.” Materials 15 (1): 219. https://doi.org/10.3390/ma15010219.
Delage, P., C. Y. Jun, and N. Sultan. 2004. “On the thermal behavior of Boom clay.” In Proc., Eurosafe 2004 Conf. Berlin: Eurosafe Forum.
Delage, P., N. Sultan, and Y. J. Cui. 2000. “On the thermal consolidation of Boom clay.” Can. Geotech. J. 37 (2): 343–354. https://doi.org/10.1139/t99-105.
Djeghader, D., and B. Redjel. 2017. “Fatigue of glass-polyester composite immersed in water.” J. Eng. Sci. Tech. 12 (5): 1204–1215.
Fleureau, J. M. 1979. “Influence d’un champ thermique ou électrique sur les phénomènes d’interaction solide- liquide dans les milieux poreux.” Doctoral thesis, Ecole Centrale de Paris. https://books.google.co.in/books/about/Influence_d_un_champ_thermique_ou_%C3%A9lect.html?id=6Fb2OgAACAAJ&redir_esc;=y.
Gupta, B. 1964. “Creep of saturated soil at different temperatures.” Master’s thesis, Dept. of Civil Engineering, Univ. of British Columbia.
Harrington, J., G. Volckaert, and D. Noy. 2014. Long-term impact of temperature on the hydraulic permeability of bentonite. London: Geological Society London Special Publications.
Huang, G. 2009. “Behavior of fiberglass/unsaturated polyester composites under sea water environment.” Mater. Des. 30 (4): 1337–1340. https://doi.org/10.1016/j.matdes.2008.06.020.
Imielińska, K., and L. Guillaumat. 2004. “The effect of water immersion ageing on low-velocity impact behaviour of woven aramid-glass fibre/epoxy composites.” Compos. Sci. Technol. 64 (13–14): 2271–2278. https://doi.org/10.1016/j.compscitech.2004.03.002.
Jadda, K., and R. Bag. 2020. “Effect of initial compaction pressure and elevated temperature on swelling pressure of two Indian bentonites.” Environ. Earth Sci. 79 (May): 1–15. https://doi.org/10.1007/s12665-020-08937-0.
Jadda, K., and R. Bag. 2021. “Thermochemical effect on swelling pressure and microstructure of monovalent and divalent Indian bentonites.” J. Hazard. Toxic Radioact. Waste 26 (1): 04021039. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000649.
Jarad, N. 2016. “Temperature impact on the consolidation and creep behaviour of compacted clayey soils.” Ph.D. dissertation, Dept. of Material Science, Université de Lorraine.
Kootsooks, A., and A. P. Mouritz. 2004. “Seawater durability of glass and carbon polymer composites.” Comput. Sci. Technol. 64 (10–11): 1503–1511. https://doi.org/10.1016/j.compscitech.2003.10.019.
Marques, M. E., S. Leroueil, and M. S. Almeida. 2004. “Viscous behaviour of St Roch-de-l’Achigan clay.” Can. Geotech. J. 41 (1): 25–38. https://doi.org/10.1139/t03-068.
Ogbonna, V. E., A. P. I. Popoola, O. M. Popoola, and S. O. Adeosun. 2022. “A review on corrosion, mechanical, and electrical properties of fiberglass-reinforced epoxy composites for high-voltage insulator core rod applications: Challenges and recommendations.” Polym. Plast. Technol. Mater. 61 (2): 176–195. https://doi.org/10.1080/25740881.2021.1967391.
Pusch, R., and N. Güven. 1990. “Electron microscopic examination of hydrothermally treated bentonite clay.” Eng. Geol. 28 (3): 303–314. https://doi.org/10.1016/0013-7952(90)90015-S.
Robinet, J. C., A. Rahbaoui, F. Plas, and P. Lebon. 1996. “A constitutive thermomechanical model for saturated clays.” Eng. Geol. 41 (1–4): 145–169. https://doi.org/10.1016/0013-7952(95)00049-6.
Romero, E., A. Gens, and A. Lloret. 2001. “Temperature effects on the hydraulic behaviour of an unsaturated clay.” Geotech. Geol. Eng. 19 (3/4): 311–332. https://doi.org/10.1023/A:1013133809333.
Sellin, P., and O. X. Leupin. 2013. “The use of clay as an engineered barrier in radioactive-waste management—A review.” Clays Clay Miner. 61 (6): 477–498. https://doi.org/10.1346/CCMN.2013.0610601.
Shariatmadari, N., and S. Saeidi Jam. 2011. “The effect of elevated temperature on compressibility and swelling of bentonite sand mixtures.” Electron. J. Geotech. Eng. 16 (May): 137–146.
Sultan, N., P. Delage, and Y. Cui. 2002. “Temperature effects on the volume change behavior of Boom clay.” Eng. Geol. 64 (2–3): 135–145. https://doi.org/10.1016/S0013-7952(01)00143-0.
Thomas, F., H. M. Jin, and J. M. Cases. 1994. Définition du comportement des argiles au cours des forages. [In French.]. Rockville, MD: PIRSEM et ARTEP.
Towhata, I., P. Kuntiwattanaku, I. Seko, and K. Ohishi. 1993. “Volume change of clays induced by heating as observed in consolidation tests.” Soils Found. 33 (4): 170–183. https://doi.org/10.3208/sandf1972.33.4_170.
Villar, M. V., and R. Gomez-Espina. 2009. Report on thermo-hydro-mechanical laboratory tests performed by CIEMAT on Febex Bentonite 2004–2008. Madrid, Espana: Centro Investigaciones Energéticas, Medioambientales y TecnológicasAmsterdam, Netherlands.
Villar, M. V., and A. Lloret. 2004. “Temperature influence on the mechanical behaviour of a compacted bentonite.” In Vol. 2 of Elsevier geo-engineering book series, 305–310. Amsterdam, Netherlands: Elsevier Geo-Engineering.
Wallenberger, F. T., and P. A. Bingham. 2010. Fiberglass and glass technology. New York: Springer.
Wersin, P., L. H. Johnson, and M. Snellman. 2006. “Impact of iron released from steel components on the performance of the bentonite buffer: A preliminary assessment within the framework of the KBS-3H disposal concept.” In Proc., Library (OPL), 932: Symp.–Scientific Basis for Nuclear Waste Management XXIX. Cambridge, UK: Cambridge Univ. https://doi.org/10.1557/PROC-932-117.1.
Xiang, G., L. Lv, and L. Ge. 2020. “Simple method for evaluating swelling of GMZ01 Na-bentonite affected by temperature at osmotic swelling.” Soils Found. 60 (5): 1312–1321. https://doi.org/10.1016/j.sandf.2020.09.003.
Ye, W. M., M. Wan, B. Chen, Y. G. Chen, Y. J. Cui, and J. Wang. 2013. “Temperature effects on the swelling pressure and saturated hydraulic conductivity of the compacted GMZ01 bentonite.” Environ. Earth Sci. 68 (1): 281–288. https://doi.org/10.1007/s12665-012-1738-4.
Zachariasen, W. H. 1932. “The atomic arrangement in glass.” J. Am. Chem. Soc. 54 (10): 3841–3851. https://doi.org/10.1021/ja01349a006.
Zhang, J., and M. Zhan. 2004. “Visual experiments for water absorbing process of fibre reinforced composites.” J. Compos. Mater. 38 (9): 779–790. https://doi.org/10.1177/0021998304042482.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Apr 11, 2023
Accepted: Sep 20, 2023
Published online: Jan 24, 2024
Published in print: Apr 1, 2024
Discussion open until: Jun 24, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.